2-Pyridylaldehydebenzoylhydrazone derivatives as highly selective precolumn chelating reagents for nickel (II) ion in kinetic differentiation mode high-performance liquid chromatography

2-Pyridylaldehydearoylhydrazones have been examined as reagents for precolumn derivatization of metal ions in the HPLC-spectrophotometry system. With the simplest analog, 2-pyridylaldehydebenzoylhydrazone (PAB), among 11 metal ions only Ni(II) ion gives the peak while the other metal chelates seem to be dissociated on an HPLC column where no added PAB is present in the eluent solutions. All other PAB analogs exhibit the peak for Ni(II) ion as well as Co(III) ion. In one reagent system, V(V) and Fe(II) chelates also appear in the chromatograms. It has been stressed that the selectivity principle is the kinetic differentiation (KD) towards metal chelates associated with the HPLC processes. The specificity for Ni(II) ion is in close relation to a key structure of the ligand molecules which provides an N,N,O coplanar coordination environment to form two five-membered chelate rings. An extremely selective and sensitive KD-HPLC method for the quantitation of Ni(II) ion at the ultra-trace levels was assessed; the detection limit (3 _Blank) for Ni(II) ion was down to 5.34 × 10^–9 mol l^–1 (31.5 pg in a 100 l injection) and the excellent applicability was checked using coal fly ash samples.     

Facile assignment of sequence ions of a peptide labelled with 18O at the carboxyl terminus.

The combination of collision-induced dissociation (CID) and linked-scan analysis was used for analysing the sequence ions from the precursor ion of a peptide, which had been labelled with 18O at its carboxyl terminus (C-terminus) using 40 atom % H2 18O. The CID and linked-scan mass spectrum of the labelled peptide gave two series of sequence-ion signals: the one, originating from the C-terminus of the labelled peptide, showed a doublet signal due to the part-incorporation of 18O into the carboxyl group at the C-terminus, while the other, originating from the amino terminus (N-terminus), has the natural isotopic ion distribution. From the distribution of the isotopic ions in a single CID spectrum, the sequence ions containing the C-terminus could be readily differentiated from those containing the N-terminus, allowing the facile assignment of sequence ions to the amino-acid sequence of a peptide by CID and linked-scan analysis. This method was successfully applied to determination of the amino-acid sequence of the light-chain of mouse anti-porphyrin monoclonal antibody.     

Extraction of lithium from GSJ rock reference samples and determination of their lithium isotopic compositions

Li was extracted completely from the Geological Survey of Japan (GSJ) rock reference samples by HF-HC1 decomposition and separated from other alkali metal ions by cation exchange chromatography. The degree of Li isotope fractionation during the preparations of samples for mass spectrometry for Li isotopic ratio measurements was, therefore, negligible. The isotopic compositions of Li extracted from the GSJ samples were measured by double-filament surface ionization mass spectrometry. The permil (%.) deviation, δ⁷Li, of the ⁷Li-to-⁶Li ratio of one of the GSJ samples (JR-1) from that of the Li isotope standard, IRM-016, was +3.9%., with a 95% confidence limit of 0.7%. The δ⁷Li values of the 16 GSJ samples varied in the range −2.5 to +6.4%.. These data are probably the first such data obtained for the GSJ rock samples. No clear dependence of the δ⁷Li value on the kind of rock was observed.     

New process for producing cellulose acetate from wood in concentrated acetic acid

To explore further potential applications of acetic acid pulp, an investigation was conducted to develop a direct method for producing cellulose acetate from wood in combination with atmospheric acetic acid pulping. The process consists of delignification, totally chlorine-free bleaching, and esterification, with the concentrated acetic acid aqueous solution being used as only solvent throughout the process. The acetic acid pulp with kappa number of 30 and ISO brightness of 16 was bleached with 5% ozone on pulp to kappa number of 1.4 and brightness of 61. The resulting bleached pulp was further bleached with peracetic acid to kappa number of less than 1.0 and brightness of 68. The final bleached acetic acid pulp was acetylated with acetic anhydride in the concentrated acetic acid for 45 min to produce cellulose acetate with an apparent degree of substitution (DS) of 2.54. Although the product was lower grade compared with commercially available cellulose diacetate because it was prepared from the chemical pulp but not dissolving pulp, the product was almost soluble in acetone. Eventually, the DS of the acetone-soluble fraction was 2.62. The acetone solubility might be attributed to the original acetic acid pulp that had been partially acetylated during the pulping.     

Electrophilic and oxidative chemistry of pyrene and its non-alternant isomers: theoretical (DFT, GIAO-NMR, NICS) study of protonation carbocations and oxidation dications from pyrene, azupyrene (dicyclopenta[ef,kl]heptalene) and dicyclohepta[ed,gh]pentalene

Mono- and diprotonated carbocations and the two-electron oxidation dications derived from parent pyrene and its nonalternant isomers "azupyrene"(dicyclopenta[ef,kl]heptalene)(DCPH) and dicyclohepta[ed,gh]pentalene (DCHP) were studied by DFT at the B3LYP/6-31G(d) level. The most likely site(s) for mono- and diprotonation were determined based on relative arenium ion energies and the structures of the energetically most favored carbocations were determined by geometry optimization. The NMR chemical shifts for the protonated mono- and dications and the oxidation dications were computed by GIAO-NMR at the B3LYP/6-31G(d)//B3LYP/6-31G(d) level and their charge delocalization paths were deduced based on magnitude of the computed [capital Delta][small delta](13)C values and the NPA-derived changes in charges. Relative aromaticity/antiaromaticity in various rings in the energetically favored mono- and dications was estimated via NICS and [capital Delta]NICS. Calculated NMR chemical shift data for and were compared with the available experimental NMR values. The available data on chemical and physical properties of DCPH and DCHP are extremely limited and biological activity data are non-existent. The present study provides the first glance into their carbocations and oxidation dications, while augmenting and reinforcing the previous stable ion data on the pyrenium cations.     

Asymmetric transfer hydrogenation of alpha-aminoalkyl alpha'-chloromethyl ketones with chiral Rh complexes

Asymmetric transfer hydrogenation of N-substituted (3S)-3-amino-1-chloro-4-phenyl-2-butanones in the presence of CpRhCl[(R,R)-Tsdpen] (S/C = 1000) with a mixture of formic acid/triethylamine gave N-substituted (2R,3S)-3-amino-1-chloro-2-hydroxy-4-phenylbutanes with up to 93% de in a quantitative yield, and reduction with the enantiomeric catalyst CpRhCl[(S,S)-Tsdpen] gave (2S,3S)-diastereomeric alcohol with up to 96% de.     

The C-ring problem of sterol biosynthesis: TiCl(4)-induced rearrangement into the anti-Markovnikov cation corresponding to the C-ring

[reaction: see text] Cation 9, generated by the reaction of diol 8 and BF(3).Et(2)O, SnCl(4), Sc(OTf)(3), FeCl(3), TiF(4), or CF(3)SO(3)H, leads to a hydride shift, providing cation 11, which corresponds to the initiation of backbone rearrangement. On the other hand, TiCl(4) selectively induces rearrangement to secondary cation 13 by ring expansion, which corresponds to the C-ring formation of sterol biosynthesis. AlCl(3) and ZrCl(4) induce further rearrangement into six-membered ring tert-cation 16.     

Preparation and properties of ligand-free methylcopper and of copper alkyls coordinated with 2,2′-bipyridyl and tricyclohexylphosphine

A series of copper alkyls (methyl, ethyl and n-propyl) with ligands (2,2′-bipyridyl and tricyclohexylphosphine) and copper methyl without ligands has been prepared by the reaction of copper(II) acetylacetonate with dialkylaluminum monoethoxides in the presence or absence of the ligand in diethyl ether under nitrogen at low temperature. The copper alkyls were characterized by elemental analysis, chemical reactions, and by IR and NMR spectra. The ligand-free methylcopper is thermally very unstable and decomposed explosively; the bipyridyl ligand showed little effect on the stability of the copper alkyl. In contrast, the tricyclohexylphosphine-coordinated complexes are thermally very stable. Various reactions of the tricyclohexylphosphine-coordinated copper alkyls toward carbon dioxide, alkyl halides and olefins have been studied.     

Effect of pressure on electrophoretic mobility of polystyrene latex particles

A capillary electrophoresis system that can apply arbitrary helium gas pressures at both inlet and outlet reservoirs was constructed. The system was used to investigate the effect of pressure on electrophoretic behavior of polystyrene latex particles. The electrophoretic mobility of latex particles was increased with the application of pressure (< 3.0 kgf/cm2). The shrinkage of particle diameter under pressurization was observed using a microscope, however, the magnitude of shrinkage was not enough to explain the increase in electrophoretic mobility. Therefore, the application of pressure might increase the electric charge of the latex particle. Since methanol inhibited the enhancement in the electrophoretic mobility of the latex particles, water might play an important role in increasing mobility.     

Determination of molecular mass of acidic polysaccharides by capillary electrophoresis

We developed a method for the determination of molecular mass of acidic polysaccharides based on their high-resolution separation by capillary electrophoresis. Polymers of N-acetylneuraminic acid (NeuAc) and polysulfated hyaluronic acid were separated into their molecular species up to 100 mono- and 20 disaccharide units, respectively. The relationship between the molecular mass of NeuAc-polymer and their electrophoretic mobilities showed good linearity, and was applied to the determination of molecular masses of larger NeuAc species unresolved by capillary electrophoresis under the same conditions. In the first step, the standard curve for the determination of molecular mass was constructed from the relationship between electrophoretic mobility and molecular mass. Subsequently, the mobility was extrapolated to the standard curve, and the molecular mass was calculated. Five different preparations of NeuAc polymers having different molecular masses showed smaller values than those determined by conventional chromatographic techniques. Further, molecular mass determined by the present method correlated with number-average molecular mass. The methodology presented here was applied to the determination of molecular mass of polysulfated hyaluronic acid. The data indicated that native hyaluronic acid was extensively degraded during sulfonation reaction.