Gold nanoparticle arrays directly grown on nanostructured indium tin oxide electrodes: Characterization and electroanalytical application

This work describes an improved seed-mediated growth approach for the direct attachment and growth of mono-dispersed gold nanoparticles on nanostructured indium tin oxide (ITO) surfaces. It was demonstrated that, when the seeding procedure of our previously reported seed-mediated growth process on an ITO surface was modified, the density of gold nanospheres directly grown on the surface could be highly improved, while the emergence of nanorods was restrained. By field emission scanning electron microscopy (FE-SEM) and cyclic voltammetry, the growth of gold nanoparticles with increasing growth time on the defect sites of nanostructured ITO surface was monitored. Using a [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ redox probe, the increasingly facile heterogeneous electron transfer kinetics resulting from the deposition and growth of gold nanoparticle arrays was observed. The as-prepared gold nanoparticle arrays exhibited high catalytic activity toward the electrooxidation of nitric oxide, which could provide electroanalytical application for nitric oxide sensing.     

Total synthesis of apigenin 7,4′-di-O-β-glucopyranoside, a component of blue flower pigment of Salvia patens, and seven chiral analogues

We have succeeded in the first total synthesis of apigenin 7,4′-di-O-β-d-glucopyranoside (1a), a component of blue pigment, protodelphin, from naringenin (2). Glycosylation of 2 according to Koenigs-Knorr reaction provided a monoglucoside 4a in 80% yield, and this was followed by DDQ oxidation to give apigenin 7-O-glucoside (12a). Further glycosylation of 4′-OH of 12a with 2,3,4,6-tetra-O-acetyl-α-d-glucopyranosyl fluoride (5a) was achieved using a Lewis acid-and-base promotion system (BF₃·Et₂O, 2,6-di-tert-butyl-4-methylpyridine, and 1,1,3,3-tetramethylguanidine) in 70% yield, and subsequent deprotection produced 1a. Synthesis of three other chiral isomers of 1a, with replacement of d-glucose at 7 and/or 4′-OH by l-glucose (1b-d), and four chiral isomers of apigenin 7-O-β-glucosides (6a,b) and 4′-O-β-glucosides (7a,b) also proved possible.     

Mapping analyses of Fe-diffused mc-Si using M?ssbauer microscope and photoluminescence

Twenty CK chondrites collected in the Antarctica Continent were characterized by inductively-coupled plasma mass spectrometry (ICP-MS), prompt gamma ray analysis (PGA), instrumental neutron activation analysis (INAA), X-ray diffractometry (XRD) and ⁵⁷Fe-M?ssbauer spectroscopy. As a result of elemental analysis, it was revealed that 18.2~26.4 mass% of iron was included in the each chondrite. M?ssbauer spectrum of LEW86258, classified as a typical CK chondrite, was found to be composed of two paramagnetic doublets and two magnetic sextets. M?ssbauer spectra were assigned to the absorption due to forsterite (Mg_1.36Fe_0.64SiO₄) and magnetite (Fe₃O₄), as also confirmed by XRD. XRD study of LAP03834, reclassified from CK to R chondrite, revealed the presence of crystalline phase due to forsterite. These results indicate that LAP03834 and related chondrites, i.e., MET01149, LAP03923 and MAC02453, should be reclassified as R or LL chondrite.     

Direct Introduction of a Dimesitylboryl Group Using Base‐Mediated Substitution of Aryl Halides with Silyldimesitylborane

The first dimesitylboryl substitution of aryl halides with a silylborane bearing a dimesitylboryl group in the presence of alkali‐metal alkoxides is described. The reactions of aryl bromides or iodides with Ph₂MeSi?BMes₂ and Na(OtBu) afforded the desired aryl dimesitylboranes in good to high yields and with high borylation/silylation ratios. Selective reaction of the sterically less‐hindered C?Br bond of dibromoarenes provided monoborylated products. This reaction was used to rapidly construct a D‐π‐A aryl dimesityl borane with a non‐symmetrical biphenyl spacer.     

Ion-Selective Electrodes Based on Bilayer Film Coating

The electrode characteristics of ion-selective electrodes (ISEs) for K⁺, Na⁺, NH₄ ⁺, and Ca²⁺ based on bilayer film coatings, where the inner layer films are electroactive electropolymerized ones and the outer layer films are composed of conventional ion-sensitive materials, have been examined. These ISEs of the coated-wire electrode type have no conventional internal reference solution and reference electrode, but the inner films may be considered to function as the “internal standard solution.” The ion selectivity coefficients and the activity range showing Nernstian response were almost comparable to those of conventional liquid-membrane electrodes. The bilayer-coated ISEs showed insensitivity to O₂ and CO₂, long-term stability, and little drift. It was also found that the electrode performance is practically unchanged after sterilization in an autoclave. The results demonstrate that the bilayer-coated ISEs examined are promising for the determination of K⁺, Na⁺, NH₄ ⁺, or Ca²⁺ activity in biological and environmental systems.     

Construction of Helically Stacked π-Electron Systems in Poly(quinolylene-2,3-methylene) Stabilized by Intramolecular Hydrogen Bonds

π-Stacked polymers, which consist of layered π-electron systems in a polymer, can be expected to be used in molecular electronic devices. However, the construction of a stable π-stacked structure in a polymer is considerably challenging because it requires sophisticated designs and precise synthetic methods. Herein, we present a novel π-stacked architecture based on poly(quinolylene-2,3-methylene) bearing alanine derivatives as the side chain, obtained through the living cyclo-copolymerization of an o-allenylaryl isocyanide. In the resulting polymer, the neighboring quinoline rings of the main chain form a layered structure with π–π interactions, which is stabilized by intramolecular hydrogen bonds. The vicinal quinoline units form two independent helices and the whole molecule is a twisted-tape structure. This structure is established on the basis of UV/CD spectra, theoretical calculations, and atomic-force microscopy.     

Construction of Helically Stacked π‐Electron Systems in Poly(quinolylene‐2,3‐methylene) Stabilized by Intramolecular Hydrogen Bonds

π‐Stacked polymers, which consist of layered π‐electron systems in a polymer, can be expected to be used in molecular electronic devices. However, the construction of a stable π‐stacked structure in a polymer is considerably challenging because it requires sophisticated designs and precise synthetic methods. Herein, we present a novel π‐stacked architecture based on poly(quinolylene‐2,3‐methylene) bearing alanine derivatives as the side chain, obtained through the living cyclo‐copolymerization of an o‐allenylaryl isocyanide. In the resulting polymer, the neighboring quinoline rings of the main chain form a layered structure with π–π interactions, which is stabilized by intramolecular hydrogen bonds. The vicinal quinoline units form two independent helices and the whole molecule is a twisted‐tape structure. This structure is established on the basis of UV/CD spectra, theoretical calculations, and atomic‐force microscopy.     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.