An integral treatment for non-Darcy free convection over a vertical flat plate and cone embedded in a fluid-saturated porous medium

An integral treatment was proposed for analysis of non-Darcy free convection over a vertical flat plate and cone within a fluid-saturated porous medium. A flexible one-parameter family of third order polynomials was employed to cope with vast changes in the velocity and temperature profiles encountered in the Darcy flow limit through to the Forchheimer flow limit. Zero curvature requirement for the temperature profile at the wall was exploited as an auxiliary relation to determine the shape parameter. Comparison of the approximate results with the exact solution reveals a high performance of the present integral procedure for heat transfer rat prediction.     

Effect of γ irradiation on the surface properties of wet polysulfone films containing poly(vinylpyrrolidone)

In Japan, hemodialyzers are usually sterilized by γ irradiation. However, the polymer materials used in the dialysis membrane, such as polysulfone (PSf) and poly(vinylpyrrolidone) (PVP), undergo crosslinking or degradation on exposure to γ radiation. In the present study, we prepared PSf/PVP films (PVP content, 0–50 wt%) and used atomic force microscopy (AFM) to perform nanoscale evaluations of the effect of γ irradiation (25 and 50 kGy) on the surface properties of wet PSf/PVP surfaces. Force‐curve measurements were used to evaluate the hardness of and fibrinogen adsorbability on the wet PSf/PVP surface; fibrinogen adsorbability on the wet PSf/PVP surface was evaluated using AFM probes with fibrinogen immobilized on the tips of the probes. At PVP levels greater than 5 wt%, the wet PSf/PVP film surface was completely covered with hydrated and swollen PVP particles. The surface hardness of the wet PSf/PVP films exposed to 25‐kGy γ irradiation greatly decreased with increasing PVP content, whereas the surface hardness of the wet PSf/PVP films exposed to 50‐kGy γ irradiation did not decrease significantly. At higher PVP levels, the reduction in the fibrinogen adsorbability on a wet PSf/PVP film exposed to 25‐kGy γ irradiation was more significant than that on a wet PSf/PVP film exposed to 50‐kGy γ irradiation. PVP particles on the wet PSf/PVP film surface exposed to 50‐kGy γ irradiation did not show significant hydration and swelling because the polymer materials PVP–PSf and PVP‐PVP in these membranes has undergone excessive crosslinking due to γ irradiation. Copyright © 2010 John Wiley & Sons, Ltd.     

Cyanide-bridged [Fe8M6] clusters displaying single-molecule magnetism (M=Ni) and electron-transfer-coupled spin transitions (M=Co)

Cyanide‐bridged metal complexes of [Fe₈M₆(μ‐CN)₁₄(CN)₁₀ (tp)₈(HL)₁₀(CH₃CN)₂][PF₆]₄?n CH₃CN?m H₂O (HL=3‐(2‐pyridyl)‐5‐[4‐(diphenylamino)phenyl]‐1H‐pyrazole), tp^?=hydrotris(pyrazolylborate), 1 : M=Ni with n=11 and m=7, and 2 : M=Co with n=14 and m=5) were prepared. Complexes 1 and 2 are isomorphous, and crystallized in the monoclinic space group P2₁/n. They have tetradecanuclear cores composed of eight low‐spin (LS) Fe^III and six high‐spin (HS) M^II ions (M=Ni and Co), all of which are bridged by cyanide ions, to form a crown‐like core structure. Magnetic susceptibility measurements revealed that intramolecular ferro‐ and antiferromagnetic interactions are operative in 1 and in a fresh sample of 2 , respectively. Ac magnetic susceptibility measurements of 1 showed frequency‐dependent in‐ and out‐of‐phase signals, characteristic of single‐molecule magnetism (SMM), while desolvated samples of 2 showed thermal‐ and photoinduced intramolecular electron‐transfer‐coupled spin transition (ETCST) between the [(LS‐Fe^II)₃(LS‐Fe^III)₅(HS‐Co^II)₃(LS‐Co^III)₃] and the [(LS‐Fe^III)₈(HS‐Co^II)₆] states.     

Nb2O5·nH2O as a heterogeneous catalyst with water-tolerant Lewis acid sites

Niobic acid, Nb(2)O(5)·nH(2)O, has been studied as a heterogeneous Lewis acid catalyst. NbO(4) tetrahedra, Lewis acid sites, on Nb(2)O(5)·nH(2)O surface immediately form NbO(4)-H(2)O adducts in the presence of water. However, a part of the adducts can still function as effective Lewis acid sites, catalyzing the allylation of benzaldehyde with tetraallyl tin and the conversion of glucose into 5-(hydroxymethyl)furfural in water.     

Pycnalin, a new α-glucosidase inhibitor from Acer pycnanthum

A new compound, pycnalin (1), together with four known compounds, ginnalins A (2), B (3), C (4), and 3,6-di-O-galloyl-1,5-anhydro-D-glucitol (3,6-di-GAG) (5), were isolated from Acer pycnanthum. The structure of 1 was determined on the basis of 2D-NMR spectral data and synthesis of 1. Pycnalin (1) is the first 1,5-anhydro-D-mannitol linked to a gallic acid, while compounds 2-5 were 1,5-anhydro-D-glucitol linked to gallic acids. All compounds were tested in vitro for α-glucosidase inhibitory and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities. Pycnalin (1) exhibited moderate α-glucosidase inhibitory activity as well as free radical scavenging activity. Ginnalin A (2) and 3,6-di-GAG (5), which have two galloyl groups, exhibited potent α-glucosidase inhibition, compared to those of other compounds 1, 3, and 4 containing a galloyl group. These results suggest that α-glucosidase inhibition is influenced by the number of galloyl groups.     

Formation and dielectric properties of anodic oxide films on Zr–Al alloys

Zr–Al alloys containing up to 26 at.% aluminum, prepared by magnetron sputtering, have been anodized in 0.1 mol dm⁻³ ammonium pentaborate electrolyte, and the structure and dielectric properties of the resultant anodic oxide films have been examined by grazing incidence X-ray diffraction, transmission electron microscopy, Rutherford backscattering spectroscopy, and AC impedance spectroscopy. The anodic oxide film formed on zirconium consists of monoclinic and tetragonal ZrO₂ with the former being a major phase. Two-layered anodic oxide films, comprising an outer thin amorphous layer and an inner main layer of crystalline tetragonal ZrO₂ phase, are formed on the Zr–Al alloys containing 5 to 16 at.% aluminum. Further increase in the aluminum content to 26 at.% results in the formation of amorphous oxide layer throughout the thickness. The anodic oxide films become thin with increasing aluminum content, while the relative permittivity of anodic oxide shows a maximum at the aluminum content of 11 at.%. Due to major contribution of permittivity enhancement, the maximum capacitance of the anodic oxide films is obtained on the Zr–11 at.% Al alloy, being 1.7 times than on zirconium at the formation voltage of 100 V.     

Morphological variation in a toroid generated from a single polymer chain

A single semiflexible polymer chain folds into a toroidal object under poor solvent conditions. In this study, we examined the morphological change in such a toroidal state as a function of the cross-sectional area and stiffness of the chain together with the surface energy, which characterizes the segmental interaction parameter. Changes in the thickness and outer/inner radius on a toroid are interpreted in terms of these parameters. Our theoretical expectation corresponds to the actual morphological changes in a single giant DNA molecule as observed by electron microscopy.     

Thermosensitive polyalcohols: Synthesis via living cationic polymerization of vinyl ethers with a silyloxy group

Thermosensitive homopolymers and copolymers with hydroxy groups were synthesized via the living cationic polymerization of Si‐containing vinyl ethers. The cationic homopolymerization and copolymerization of five vinyl ethers with silyloxy groups, each with a different spacer length, were examined with a cationogen/Et_1.5AlCl_1.5 initiating system in the presence of an added base. When an appropriate base was added, the living cationic polymerization of Si‐containing monomers became feasible, giving polymers with narrow molecular weight distributions and various block copolymers. Subsequent desilylation gave well‐defined polyalcohols, in both water‐soluble and water‐insoluble forms. One of these polyalcohols, poly(4‐hydroxybutyl vinyl ether), underwent lower‐critical‐solution‐temperature‐type thermally induced phase separation in water at a critical temperature (T_PS) of 42 °C. This phase separation was quite sensitive and reversible on heating and cooling. The phase separation also occurred sensitively with random copolymers of thermosensitive and hydrophilic or hydrophobic units, the T_PS values of which in water could be controlled by the monomer feed ratio. The thermal responsiveness of this polyalcohol unit made it possible to prepare novel thermosensitive block and random copolymers consisting solely of alcohol units. One example prepared in this study was a 20 wt % aqueous solution of a diblock copolymer consisting of thermosensitive poly(4‐hydroxybutyl vinyl ether) and water‐soluble poly(2‐hydroxyethyl vinyl ether) segments, which transformed into a physical gel above 42 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3300–3312, 2003