Time‐Dependent Emission Enhancement of the Ethynylpyrene‐o‐Carborane Dyad and Its Application as a Luminescent Color Sensor for Evaluating Water Contents in Organic Solvents

The time‐dependent emission enhancement (TDEE) phenomena of the 1‐(o‐carboran‐1‐yl)ethynylpyrene dyad were reported. It was found that the emission intensity from the dyad increased in tetrahydrofuran (THF), acetone and dichloromethane with increasing incubation time. From the mechanistic studies, it was suggested that agglomeration of the dyad gradually proceeded in these media, followed by expression of excimer luminescence. Additionally, it was shown that the rates of TDEE of the dyad were sensitively accelerated in the presence of a trace amount of water. Based on this fact, a detection system for water contents in acetone was constructed. Before and after incubation for 96 h at room temperature, time courses of changes in optical properties were monitored. Finally, water contents in acetone can be estimated by the degrees of TDEE and emission color changes in the range from 0.1 wt % to 2.0 wt % and from 2.0 wt % to 20 wt %, respectively.     

Color speckle measurement of white laser beam emitted from fiber output of RGB laser modules

Optical Review - Color speckle metrics of an RGB-combined white laser beam emitted from an optical fiber output of two types of RGB laser module are measured. A new method for eliminating the...     

Diradical Character Tuning for the Third‐Order Nonlinear Optical Properties of Quinoidal Oligothiophenes by Introducing Thiophene‐S,S‐dioxide Rings

To create a design guideline for efficient third‐order nonlinear optical (NLO) molecules, the chain‐length (n) dependences of the diradical character y and the longitudinal second hyperpolarizability γ of quinoidal oligothiophenes (QTs), from monomers to octamers, involving thiophene‐S,S‐dioxide rings are investigated by using the density functional theory method. It turns out that the diradical character of the modified QTs is reduced as compared to those of the pristine QTs. By introducing an appropriate number of oxidized rings into the QT framework, intermediate y values can be achieved even in the systems with large values of n, in which the pristine QTs are predicted to have pure diradical character. Such intermediate diradical oligomers are shown to exhibit enhanced γ values as compared to the pristine QTs with the same value for n. From the calculation results, the introduction of the optimal number of thiophene‐S,S‐dioxide rings is predicted to be an efficient chemical modification for optimizing the third‐order NLO properties of open‐shell QTs through tuning the diradical characters.     

Solid-state polymerization of long-chain vinyl compounds. II. Effect of molecular arrangement on polymerizability of octadecyl acrylate

To clarify the effect of a molecular arrangement of long-chain monomers on polymerizability, γ-ray-initiated postpolymerization of polymorphic crystals of octadecyl acrylate and the melt has been investigated. According to thermal, x-ray, and infrared (IR) analyses octadecyl acrylate exhibit three crystalline modifications similar to, but different in transition behavior from, those of octadecyl methacrylate. The α-form is stable in the range of 19–32°C (mp) and at lower temperatures the β-form is stable, whereas the sub-α-form appears transiently in α → β transition. The monomer molecules in triclinic packing (α-form) show little tendency to polymerize, whereas those in hexagonal packing (β-form) have high polymerizability that increases with temperature. The polymerizability in the molten state at fairly high temperatures is rather low, however. Thus the polymerization rate, saturated conversion, and polymer molecular weight exhibit maxima just above the melting point of α-form. It is concluded that the hexagonal packing of monomer molecules with particular orientation in the layered structure and rotational freedom around the molecular axis, together with some conformational freedom of functional group, is favorable to the polymerization reaction. In addition, the mechanism of polymerization in the layered structure is discussed, assuming a cone-type distribution for the polymerization probability.     

Solid-state polymerization of long-chain vinyl compounds. I. Effect of molecular arrangement on polymerizability of octadecyl methacrylate

γ-Ray-initiated postpolymerization of octadecyl methacrylate in polymorphic crystals and melt has been investigated to clarify the effect of molecular arrangement of the monomer on polymerizability. From thermal, x-ray, and infrared (IR) analyses this long-chain monomer exhibited three crystalline modifications that we refer to as α-, sub-α, and β-forms. The β-form (mp 28.7–29.7°C), which is obtainable from solution, is a stable state with triclinic chain packing. The α-form (mp 19.5–20.0°C), which is obtained first from the melt but transforms into β-form on storing, is a metastable state with hexagonal chain packing. The sub-α-form appears transiently in α→β transition. The polymerizability of octadecyl methacrylate in the β-form is extremely low, whereas the α-form can polymerize easily and the initial polymerization rate, saturated conversion, and polymer molecular weights increase with temperature. Polymerizability in the molten state at fairly high temperature is rather low, however. Thus maximum polymerizability is obtained just above the melting point of α-form. It has been found that particular orientation and suitable packing mode with some freedom of rotational motion of the monomer molecules in layered structure accelerate the polymerization reaction.     

Solid-state polymerization of long-chain vinyl compounds. V. Two-step postpolymerization of octadecyl acrylate by temperature increase and by stepwise γ-ray irradiation

The mechanism of two-dimensional polymerization of octadecyl acrylate in lamellar crystal was investigated in two-step postpolymerizations by temperature increase and stepwiseγ-ray irradiation in lieu of the usual one-step reaction. Two-step postpolymerizations by these procedures are interpreted satisfactorily by the cone model, which assumes that the polymerization probability of the monomer molecules in a single layer is distributed conically around the initiation point. It was found that the propagating radicals were living, even in the saturated stage, and the effect of the polymer chains already formed on the propagating and terminating reactions was evident. Furthermore, molecular weight distributions of the resultant poly(octadecyl acrylate) measured by gel permeation chromatography (GPC) were broad. The values of M_w /M _n for the two-step post polymerizations were 4.71–7.03, whereas those for one-step reactions were 3.26–5.54.     

How the pi conjugation length affects the fluorescence emission efficiency

How the pi conjugation length affects the fluorescence emission efficiency is elucidated by examination of the theoretical and experimental relationship between absolute quantum yield (Phi(f)) and magnitude (Api) of the pi conjugation length in the excited singlet state, which provides a novel concept for molecular design for highly fluorescent organic compounds. As a tool to predict Phi(f) from a structural model, (nu(a) - nu(f))1/2 x a3/2 (nu(a): wavenumber of absorption maximum, nu(f): wavenumber of emission maximum, a: molecular radius) could be used instead of Api. The concept should be valuable for potential applications to (1) examination of an excited singlet state structure (for example, coplanarity of excited-state molecules) and (2) molecular design of novel materials, in which the excited singlet state plays an important role, such as highly efficient fluorophores, electroluminescent materials, photoconducting materials, and nonlinear optical materials. A remarkably intense green fluorophore (Phi(f) 0.88, log epsilon 4.72, lambda(em) 527 nm) is created based on this concept, which is of great interest in relation to a green fluorescent protein (Topaz, T203Y type, Phi(f) 0.60, log epsilon 4.98, lambda(em) 527 nm).     

Photophysical properties of oligophenylene ethynylenes modified by donor and/or acceptor groups

To create highly fluorescent organic compounds in longer wavelength regions, and to gain physical chemistry insight into the photophysical characteristics, we investigated photophysical properties (Phi(f), lambda(em), tau, lambda(abs), epsilon, k(r), and k(d)) and their controlling factor dependence of the following pi-conjugated molecular rods consisting of p-phenyleneethynylene units modified by donor (OMe) and/or acceptor (CN): (1) side-donor modification systems (SD systems), (2) side-acceptor modification systems (SA systems), and (3) systems consisting of donor block and acceptor block (BL systems). As a result, very high Phi(f) values (>0.95) were obtained for BL systems. Bathochromic shifts of lambd(em) in the same pi conjugation length were largest for BL systems. Thus we succeeded in the creation of highly efficient light emitters in the longer wavelength region by block modification (e.g., Phi(f) = 0.97, lambda(em) = 464 nm for BL-9), contrary to expectation from energy gap law. Considerably intense solid emission (Phi(f) approximately 0.5) in the longer wavelength region (500-560 nm) was also found for BL systems, presumably because of molecular orientation that hinders the self-quenching of fluorescence in solids. From (1) a Lippert-Mataga plot, (2) density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations, and (3) the positive linear relationship between the optical transition energy (nu(em)) and the difference between the highest occupied molecular orbital of the donor and the lowest unoccupied molecular orbital of the acceptor (HOMO(D)-LUMO(A) difference), it is elucidated that the excited singlet (S1) state of BL systems has a high charge transfer nature. The number (n) of energetically equivalent dipolar structure (EEDS) units in the oligoarylene ethynylenes is shown to be a measure of the effective pi conjugation length in the S1 state. The S1 state planarity increases with n values of EEDS units and by the introduction of donor and/or acceptor groups. It is worth noting that the Phi(f) values increase linearly with the n values of EEDS units.     

Two new dimeric coumarins isolated from Murraya exotica

Bismurrangatin and murramarin A, two new coumarins, were isolated from the vegetative branches of Murraya exotica. Murramarin A is a rare type of bicoumarin that connects two coumarin moieties by orthoester structure. The structures were elucidated based on spectroscopic methods, especially by 2D-NMR experiments.