Effect of comonomer sorption on radiation-induced copolymer grafting onto polyethylene and EVA films in the vapor phase

Radiation-induced copolymer grafting of acenaphthylene and maleic anhydride onto polyethylene or EVA film in the vapor phase was carried out and the effect of comonomer sorption on the grafting was studied. When polyethylene film was used as a backbone polymer, the sorption of the binary monomers during the grafting increased linearly as the grafting reaction proceeded. The marked increase was probably caused by the formation of a grafted layer. Particularly, the sorption of maleic anhydride was brought about by the existence of a grafted layer. In grafting onto EVA film, the content of maleic anhddride in the grafted copolymer increased with the increasing content of vinyl acetate in EVA. Continuous measurements of sorption of the comonomers onto EVA and grafted EVA films were carried out by use of an electrobalance. The distinctive feature of the sorption was that the equilibrium sorption of acenaphthylene or maleic anhydride onto the grafted EVA film increased and the diffusion constants for both comonomers decreased markedly with increasing percentage of graft. The copolymer grafting was explained from these results by assuming that the monomer molecules are supplied to the propagating chain ends mostly through a sorbed state on the polymer film.     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Scope and limitations of chiral B-

A new chiral oxazaborolidine catalyst was prepared in situ from 3, 5-bis(trifluoromethyl)phenylboron dichloride and N-(p-toluenesulfonyl)-(S)-tryptophan. This catalyst is much more active than Corey's original catalyst for the Mukaiyama aldol reaction of aldehydes with silyl enol ethers. The observed syn selectivities and re-face attack of silyl enol ethers on carbonyl carbon of aldehydes imply that the extended-transition state model is applicable.     

Periodate oxidation analysis of carbohydrates: Part IV. Simultaneous determination of aldehydes in di-aldehyde fragments as 2,4-dinitrophenylhydrazones by thin-layer or liquid chromatography

A method for the simultaneous determination of aldehydes in dialdehyde fragments, obtained from carbohydrate samples by periodate oxidation, is proposed. Reaction mixtures obtained from the periodate oxidation of carbohydrate samples are deionized by resins, and evaporated to dryness. The syrupy residues are treated with 2,4-dinitrophenylhydrazine hydrochloride in 1.2-dimethoxyethane at 25°C for 3 h. The resultant mixtures of hydrazones are separated by t.l.c. or l.c., and individual hydrazones are determined by spectrophotometric measurement. Reliable analyses of carbohydrate linkages are possible with 50–250-μg samples.     

Palladium-catalyzed asymmetric cyclization of methyl (E)-oxo-9-phenoxy-7-nonenoate and its analogs

Asymmetric cyclizations of methyl (E)-3-oxo-9-phenoxy-7-nonenoate ($\text{1}$) or methyl (E)-3-oxo-9-(methoxycarbonyl)oxy-7-nonenoate ($\text{4}$) without added base were carried out in the presence of a catalytic amount of palladium(II) acetate and chiral diphosphine as ligands. Allylic carbonate $\text{4}$ reacted by use of Pd(OAC)₂-(S)-(R)-BPPFA at room temperature to give (R)-3-vinylcyclohexanone ($\text{3}$), after decarboxylation, in up to 48% e. e.     

Remarkable tris(trimethylsilyl)silyl group for diastereoselective [2 + 2] cyclizations

[reaction: see text] Diastereoselective [2 + 2] cyclizations of aldehyde- and ketone-derived silyl enol ethers with acrylates is described. The use of the tris(trimethylsilyl)silyl group allows for unprecedented reactivity, yields, and selectivity for these cyclizations. The presence of silicon-silicon bonds proved to be important for this transformation, where typical silyl groups (TBS and TIPS) failed to give any desired product. The bulky bis(2,6-diphenylphenoxide) aluminum triflimide catalyst was essential for high diastereoselectivity.     

Synthesis of human renin inhibitory peptides, angiotensinogen transition-state analogs containing a retro-inverso amide bond

The experimental details for the synthesis of human renin inhibitors are described. In order to avoid metabolic degradation of the Phe-His (P3-P2) amide bond in transition-state analogs, structurally modified acyl residues (P4-P3) were incorporated into the inhibitors. Compound 1a, which contained 2-(1-naphthylmethyl)-3-(N-phenethylcarbamoyl)propionyl residue (P4-P3) with a retro-inverso amide bond, L-histidine, and norstatine isoamylamide residue (P1-P1) as a transition-state mimic, had potent human renin inhibitory activity, and it lowered blood pressure when administered orally to common marmosets.     

Computational examination of the electrophilic reaction on oxidative polymerization of phenyltrimethylsilane with sulfur chloride

Phenyltrimethylsilane possesses a higher HOMO energy (–9.34 eV) than nonsubstituted benzene (>0.41 eV). The π electron of the phenyltrimethylsilane localizes on the benzene ring at the ipso position rather than at the para position. Two center energies calculated by the MNDO-PM3 method indicate that the C? Si bond is facilitated to cleave in comparison with the C? H (para position) one of the benzene ring. Phenyltrimethylsilane and phenyl bis(trimethylsilane) were polymerized with sulfur chloride through the cationic oxidative polymerization. The product is isolated as oligo(p-phenylene sulfide), with a melting point of 150–190°C. An electrophile attacks the carbon atom linked to the Si atom in phenyltrimethylsilane. The new synthetic route of PPS can be established on the basis of the computational calculation.     

Preparation and reactions of s,s-dimethyl-n-(2,4-dinitrophenyl)sulfilimine

S,S-Dimethyl-N-(2,4-dinitrophenyl)sulfilimine(4a) has been prepared in good yield by use of DMSO, 2,4-dinitroaniline and phosphorus pentoxide in DMF and the role of DMF in this System is discussed. The method has been applied successfully to the syntheses of several sulfilimines. The reactions of 4a with protonic compounds show an interesting ylide-exchange reaction.