Physically adsorbed chiral stationary phase of avidin on monolithic silica column for capillary electrochromatography and capillary liquid chromatography

The physical adsorption method proposed previously has been successfully applied to a monolithic silica column. By virtue of the physical adsorption, a chiral stationary phase of avidin was prepared onto the silica monolith. The phase ratio of resulting stationary phase was evaluated with frontal analysis. The method proved to be comparable in phase ratio to the chemical bonding methods used in high-performance liquid chromatography (HPLC). Enantiomer separations were carried out in capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) modes. Due to its larger phase ratio, the resulting column showed more powerful separation capability as compared to open-tubular CEC (OTCEC). Twelve chiral compounds were baseline-resolved. The resulting column showed high separation efficiency, with average theoretical plate numbers of 66 000/m for CLC and 122 000/m for CEC. Good reproducibility was observed, with RSD value less than 1.3% for retention time, retention factor and separation factor, and less than 6.6% for plate counts and resolution (n = 40). Fast separations were achieved with a short column. The test enantiomers were baseline-resolved within 4 min under CLC and CEC modes. In addition, field-enhanced sample injection (FESI) was coupled to CLC as well as CEC to improve the detection sensitivity.     

Potentiometric stripping determination of heavy metals using a graphite-reinforcement carbon vibrating electrode

Potentiometric stripping determination of Cd, Cu and Zn using a vibrating electrode (VE) is presented. A simple VE was constructed by using a piezoelectric bimorph oscillator and an inexpensive graphite-reinforcement carbon (GRC) rod (a mechanical pencil). Experimental results obtained with the simple VE follow the equation valid for quantitative application of potentiometric stripping analysis (PSA) in large solutions. It was found that the GRC vibrating electrode is suitable for multielement trace analysis of small samples of 0.05 mL. The relative standard deviations for divalent metals are better than 2%. Received: 3 February 1997 / Revised: 2 June 1997 / Accepted: 7 June 1997     

Molluscicidal triterpenoidal saponin from Lysimachia sikokiana

The main molluscicidal activity of the methanol extract of Lysimachia sikokiana is due to several triterpenic saponins called sakuraso-saponins. The most active component was isolated from the aerial parts and elucidated as 3-O-beta-xylopyranosyl-(1----2)-beta-glucopyranosyl-(1----4)- [beta-glucopyranosyl-(1----2)]-alpha-arabinopyranosyl protoprimulagenin A, named lysikoianoside 1, on the basis of 1H- and 13C-nuclear magnetic resonance spectral data and methylation analysis results.     

Synthesis, properties, and crystal structure of a novel anthracene-bridged molybdenum-zinc porphyrin dimer

The synthesis and properties of novel anthracene-bridged porphyrin dimers having an oxomolybdenum(V) porphyrin unit, H(2)(DPA)[Mo(V)O(OMe)] (1) and (DPA)[Mo(V)O(OMe)][Zn(II)(MeOH)] (2), and the relevant monomer porphyrin complexes Mo(V)O(MPP)OMe (3) and Zn(II)(MPP) (4) are presented. An oxomolybdenum(V) unit was introduced into one of the two porphyrins in DPA to give 1, which has a free-base porphyrin unit. By introducing a zinc(II) ion to the free-base part, a mixed-metal complex of 2 was prepared and isolated. The structure of 2 was analyzed by X-ray crystallography (2.(7)/(6)CH(2)Cl(2), triclinic, P(-)1 (no. 2), a = 15.2854(12) A, b = 19.9640(15) A, c = 13.6915(12) A, alpha = 90.968(3), beta = 113.108(4), gamma = 96.501(4), Z = 2, R1 = 9.9, wR2 = 19.2). The structure of 2 demonstrated that a methanol is stably coordinated to the Zn(II) ion with the aid of a hydrogen bond to the methoxo ligand on the Mo(V) ion in the binding pocket of DPA. The electrochemical measurements of 2 suggested that the methanol was kept in the pocket of DPA in solution even at the reduced state of the molybdenum ion.     

Crystal habit of fcc metal particles controlled by electrode potential in solution

The crystal habit of fcc metal particles formed on an amorphous carbon film electrode in solution at different electrode potentials is discussed. The fcc metal particles have different crystallographic habits depending on applied electrode potential; that is, icosahedral and/or decahedral particles are formed at lower potentials, and fcc single-crystalline or polycrystalline particles at higher potentials. It was found that decahedra and icosahedra of Cu-Au alloy particles are formed in the potential region of underpotential deposition (UPD) of Cu at which only fcc Au single-crystalline particles and Au polycrystalline particles appear. This is attributed to the charge transfer from the UPD Cu ions to the Au overlayer of Cu-Au alloy particles. The formation of decahedral and icosahedral Cu-Au alloy particles depends on the composition of the Cu-Au alloy. On the basis of these results it was deduced that the contraction of the surface lattice of the growing particles is responsible for the formation of icosahedral and decahedral particles. Received: 25 February 1997 / Accepted: 21 April 1997     

A New Approach to the Construction of BEDT-TTF Derivatives Condensed with Heterocycles via BF3-promoted Reactions of Organotin Thiolates

The synthesis of BEDT-TTF derivatives fused with heterocycles (3–7) has been accomplished via the BF₃-promoted reaction of organotin thiolates (8 and 9) with electrophiles (10 and 11). Electrical conductivities of radical cation salts derived from some of them were also investigated.     

Structure of a 1:1 molecular complex of trans-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene with ethanol

X-ray analysis of the title complex revealed hydrogen-bonded chains comprising two crystallographically independent types of $\text{trans}$-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene molecules, in which the central 1,4-cyclohexadiene rings are respectively flat and very slightly puckered, with the ethanol molecules attached exclusively to the latter type.     

Highly regio- and stereoselective hydrometallation reactions of fluorine-containing internal alkynes: Novel approaches to fluoroalkylated alkenes

Hydroalumination, hydrocupration, and hydroboration reactions of various fluorine-containing alkynes were investigated. The alkyne reacted smoothly with 2.0 equiv. of Red-Al at −78 °C to give the hydroaluminated adduct in a highly regio- and stereoselective manner, which was treated with iodine, the corresponding vinyliodide being produced in moderate yield. Hydrocupration of the alkynes also took place, but the resulting vinylmetal reacted with various electrophiles sluggishly. In sharp contrast, the reaction with dicyclohexylborane proceeded smoothly to afford the cis-addition products preferentially, which were subjected to Suzuki-Miyaura cross-coupling reaction, leading to trisubstituted alkenes in high yields.     

Elongation and contraction of molecular springs. Synthesis, structures, and properties of bridged [7]thiaheterohelicenes

A series of bridged [7]thiaheterohelicenes 3a-c and 4 with a variety of helical pitches have been prepared from racemic and optical pure 2,13-bis(hydroxymethyl)dithieno[3,2-e:3',2'-e']benzo[1,2-b:4,3-b']bis[1]benzothiophene (1) in order to investigate the helical structures in solution. Recrystallizations of (PM)-3a, (PM)-3b, (PM)-3c, and (P)-4 from hexane-dichloromethane gave crystals suitable for X-ray crystallography, while recrystallization of (PM)-4 with benzene gave an inclusion complex with a stoichiometry of (PM-4)(4).(C(6)H(6)). X-ray analyses of (PM)-3a-c, (PM-4)(4).(C(6)H(6)), and (P)-4 indicate that the dihedral angles between terminal thiophene rings of the helical framework significantly vary from 22 degrees for 4 to 59 degrees for 3c. This represents as increase of 37 degrees or 168%. Although the (13)C NMR and UV absorption spectra of bridged helicenes 3a-c and unbridged helicene 5 are essentially the same, the molar rotation of 5 is very large compared with those of 3a-c and 4. A red shift (15 nm) in the circular dichroism (CD) spectrum is observed for 4, suggesting that this compound is more planar than 3a-c in solution. In the series of [7]thiaheterohelicenes studied, the minimum helical pitch is 2.70 A for 4.     

Loss and recovery in hydrophobicity of silicone rubber exposed to corona discharge

This paper describes the loss and recovery in the hydrophobicity of unfilled high temperature vulcanized silicone rubber (HTV-SR) resulting from corona discharge. In this study, HTV-SR specimens were exposed to corona stress generated by a parallel needle-plane electrode system, and physicochemical analyses on the surface layer of SR before and after corona discharge treatment were carried out by using Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It is demonstrated that hydrophilic OH groups that are by-products of ageing can be formed instead of hydrophobic CH₃ groups on the surface of aged SR and the corona discharge plays an important role on the temporary loss of hydrophobicity. After a substantial period of ‘rest’, the hydrophobic recovery of SR results from the diffusion of low-molecular weight (LMW) silicone fluid from the bulk onto the aged layer.