High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) and its model compounds

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) were studied in comparison with those of the model formals obtained from stereoisomers of pentane-2,4-diol and heptane-2,4,6-triol in order to learn spectral changes due to differences of the steric structures of the polymer. In the NMR spectrum of transformal obtained from dl diol or dl,dl (syndiotactic) triol, all proton signals were well interpreted by assuming a rapid chair-chair inversion of the formal ring. On the other hand, no such inversion was observed spectroscopically in cis-formal obtained from the meso diol or meso,meso (isotactic) triol, and the cis-formal ring was supposed to take a diequatorial form preferentially. Consequently, dioxymethylene protons gave a single peak (equivalent) in trans-formal and an AB quartet (nonequivalent) in cis-formal. In the spectra of poly(vinyl formal), the dioxymethylene signal was an overlap of the singlet and quartet in dimethylsulfoxide solution. Observations of the spectra of various poly(vinyl formals) obtained from poly(vinyl alcohols) of different tacticities and study of temperature dependence of the signal have shown that the singlet and quartet are attributed to trans- and cis- formals, respectively, in the polymer spectrum also. In the infrared spectra of poly(vinyl formals), the 800 and 785 cm^-1 bands were found to be related to cis- and trans-formal rings respectively. A linear relationship was confirmed between D₇₈₅/D₈₀₀ and trans/cis ratios determined from the peak intensities of the dioxymethylene proton signals.     

Synthesis of poly (ethylene oxide)-b-polysilane by anionic polymerization of masked disilenes using a macroinitiator method

Poly(ethylene oxide-)-poly(1, 1-dimethyl-2, 2-dihexyldisilene) block copolymers (PEO-b-PMHS) were synthesized by the anionic polymerization of masked disilenes initiated with the potassium alkoxide of poly(ethylene glycol). The block copolymer self-assembled into polymer micelles in water accompanied by a transition in the polysilane conformation.     

Photophysics and photochemistry of sterically strained α-haloanthraquinones: The bromo and/or chloro substituted compounds

The steric hindrance between the oxygen and halogen atoms results in the structural deformation of α-haloanthraquinones and their lowest excited triplet (T₁) states are of mixed nπ ^*-ππ ^* or ππ ^* character with unusually short lifetimes. Moreover, the rates of hydrogen-atom abstraction from ethanol by the T₁ states decrease with their increasing ππ ^* character, and the proximity of the halogen atom to the hydroxy group causes the photochemical intramolecular elimination of hydrogen halide from the initial photoproducts (α-haloanthrahydroquinones) yielding α-haloanthraquinones (or anthraquinone) with one less halogen atom than the original molecule; the final product is anthrahydroquinone. The remarkably large structural deformation of 1,8-dihaloanthrasemiquinone radicals which gives rise to the simultaneous formation of 1,8-dihaloanthrahydroquinones and the original anthraquinones. Of particular interest is observation of the absorption band(s) attributable to the second excited triplet (T₂) states of 1,8-dihaloanthraquinones. However, the electron transfer from triethylamine (TEA) to these T₂ states generating the radical anions is observed only in acetonitrile, while that to the T₁ states generating their exciplexes with TEA is observed not only in acetonitrile but also in toluene and ethanol.     

The structure of enopeptins A and B, novel depsipeptide antibiotics

The structures of enopeptins A and B, novel depsipeptide antibiotics with 1,3,5,7,9-decapentaene-1,10-dicarboxylic acid and 2-amino-3-hydroxycyclopent-2-enone in a side chain, were determined by chemical and spectroscopic means.     

Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

Vacancy ion-exclusion chromatography of aromatic carboxylic acids on a weakly acidic cation-exchange resin

Determination of aromatic carboxylic acids by conventional ion-exclusion chromatography is relatively difficult and methods generally rely on hydrophobic interaction between the solute and the resin. To overcome the difficulties in determining aromatic carboxylic acids a new approach is presented, termed vacancy ion-exclusion chromatography, which is based on use of the sample as mobile phase and an injection of aqueous 10% methanol onto a weakly acidic cation-exchange column (TSKgel OApak-A). Highly sensitive conductivity detection occurred with sharp and well-shaped peaks, leading to very efficient separations. The effects of sulfuric acid concentration added to the mobile phase, flow-rate, and column temperature on the retention volume of tested aromatic carboxylic acids was investigated. Retention times were found to be affected by the concentration of the analytes in the mobile phase and to some extent also by the addition of an organic modifier such as methanol to the injected water sample. Separation of sulfuric acid (SA), naphthalenetetracarboxylic acid (NTCA), phthalic acid (PA) and benzoic acid (BA) was satisfactory using this new approach. Detection limits were 0.66, 0.67, 0.42 and 0.86 microM and detector responses were linear in the range 1-100, 1-80, 2.5-100 and 10-40 microM, for SA, NTCA, PA and BA, respectively. Precision for retention times was 0.36% and for peak areas was 1.5%.     

Synthesis of Arenethiolate Complexes of Divalent and Trivalent Lanthanides from Metallic Lanthanides and Diaryl Disulfides: Crystal Structures of [{Yb(hmpa)(3)}(2)(&mgr;-SPh)(3)][SPh] and Ln(SPh)(3)(hmpa)(3) (Ln = Sm, Yb; hmpa = Hexamethylphosphoric Triamide)

A convenient and one-pot synthetic method of lanthanide thiolate compounds was developed. An excess of metallic samarium, europium, and ytterbium directly reacted with diaryl disulfides in THF to give selectively Ln(II) thiolate complexes, [Ln(SAr)(&mgr;-SAr)(thf)(3)](2) (1, Ln = Sm; 2, Ln = Eu; Ar = 2,4,6-triisopropylphenyl), Yb(SAr)(2)(py)(4) (3, py = pyridine), and [{Ln(hmpa)(3)}(2)(&mgr;-SPh)(3)][SPh] (6, Ln = Sm; 7, Ln = Eu; 8, Ln = Yb; hmpa = hexamethylphosphoric triamide). Reaction of metallic lanthanides with 3 equiv of disulfides afforded Ln(III) thiolate complexes, Ln(SAr)(3)(py)(n)()(thf)(3)(-)(n)() (9a, Ln = Sm, n = 3; 9b, Ln = Sm, n = 2; 10, Ln = Yb, n = 3) and Ln(SPh)(3)(hmpa)(3) (11, Ln = Sm; 12, Ln = Eu; 13, Ln = Yb). Thus, Ln(II) and Ln(III) thiolate complexes were prepared from the same source by controlling the stoichiometry of the reactants. X-ray analysis of 8 revealed that 8 has the first ionic structure composed of triply bridged dinuclear cation and benezenethiolate anion [8, orthorhombic, space group P2(1)2(1)2(1) with a = 21.057(9), b = 25.963(7), c = 16.442(8) ?, V = 8988(5) ?(3), Z = 4, R = 0.040, R(w) = 0.039 for 5848 reflections with I > 3sigma(I) and 865 parameters]. The monomeric structures of 11 and 13 were revealed by X-ray crystallographic studies [11, triclinic, space group P&onemacr; with a = 14.719(3), b = 17.989(2), c = 11.344(2) ?, alpha = 97.91(1), beta = 110.30(2), gamma = 78.40(1) degrees, V = 2751.9(9) ?(3), Z = 2, R = 0.045, R(w) = 0.041 for 7111 reflections with I > 3sigma(I) and 536 parameters; 13, triclinic, space group P&onemacr; with a = 14.565(2), b = 17.961(2), c = 11.302(1) ?, alpha = 97.72(1), beta = 110.49(1), gamma = 78.37(1) degrees, V = 2706.0(7) ?(3), Z = 2, R = 0.031, R(w) = 0.035 for 9837 reflections with I > 3sigma(I) and 536 parameters]. A comparison with the reported mononuclear and dinuclear lanthanide thiolate complexes has been made to indicate that the Ln-S bonds weakened by the coordination of HMPA to lanthanide metals have ionic character.     

Polymerization of methyl methacrylate by the binary system of the copper–amine complex type resin and carbon tetrachloride

The polymerization of vinyl monomers initiated by binary initiator systems composed of a copper–amine complex type resin and organic halides has been studied. These binary systems initiated the polymerization of various vinyl monomers. A kinetic study of the polymerization of methyl methacrylate initiated by the copper–amine complex resin–CCl₄ system was carried out, and it was found that the polymerization proceeds by way of a radical mechanism. This fact was also supported by the copolymerization of methyl methacrylate with styrene. The overall activation energy of the polymerization of methyl methacrylate was estimated as 8.4 kcal/mole. The activity of the initiator systems was greatly dependent upon the dissociation energy of carbon–halogen bonds in the organic halides. A possible initiation mechanism with the binary systems is proposed and discussed.     

Synthesis of carbazole,acridine, phenazine, 4H‐benzo[def]carbazole and their derivatives by thermal cyclization reaction of aromatic amines

A variety of nitrogen‐containing heterocycles were synthesized by passing vapors of aromatic amines over calcium oxide at 450–650 °C under nitrogen carrier gas. Reaction of 2‐aminobiphenyl 3a at 560 °C gave carbazole 4 in 80% yield. Reaction of 2, 2′‐diaminobiphenyl 3b afforded a mixture of carbazole 4 and 4‐aminocarbozole 6b. In the case of 2‐amino‐2′‐nitrobiphenyl 3c, benzo[c]cinnoline 7 was obtained along with carbazole 4. Reaction of 2‐amino‐2′‐methoxybiphenyl 3d gave four products of carbazole 4,4‐hydroxycarbazole 6e, phenanthridine 8 and dibenzofuran 9. Reaction of 2‐aminodiphenylmethane 5a afforded acridine 10. In the case of 2‐aminobenzophenone 5b, acridone 11 was obtained as a major product. Reaction of 2‐aminobenzhydrol 5c gave acridine 10. When 2‐aminodiphenylamine 5d was reacted, phenazine 12 was obtained in good yield. In contrast, reaction of 2‐aminodiphenyl ether 5e produced only 2‐hydroxydiphenylamine 13. Reaction of 4‐aminophenanthrene 14 produced 4H‐benzo[def]carbazole 15 in 61% yield.