Mononuclear oxovanadium complexes of tris(2-pyridylmethyl)amine

Mononuclear oxovanadium(IV) and dioxovanadium(V) complexes of tris(2-pyridylmethyl)amine (tpa) have been prepared for the first time. Crystal structure determinations of three oxovanadium(IV) complexes, [VO(SO4)(tpa)], [VOCl(tpa)]PF6, or [VOBr(tpa)]PF6, and a dioxovanadium(v) complex [V(O)2(tpa)]PF6 disclosed that the tertiary nitrogen of the tpa ligand always occupies the trans-to-oxo site. The structures of an oxo-peroxo complex [VO(O2)(tpa)]Cl that was prepared previously and of a mu-oxo vanadium(III) complex [{VCl(tpa)}2(mu-O)](PF6)2 have also been determined. The tertiary nitrogen is located at a trans site to the peroxo and chloride ligands, respectively. The total sums of the four V-N bond lengths from the tpa ligand are remarkably similar among the six complexes, indicating that the vanadium oxidation states become less influential in tpa bonding due primarily to the coordination of electron-donating oxo ligand(s). Absorption spectra of [VOCl(tpa)]+ in acetonitrile showed a significant change upon addition of p-toluenesulfonic acid and HClO4, but not on addition of benzoic acid. Protonation at the oxo ligand by the former two acids is suggested. Cyclic voltammetric studies in acetonitrile verified the proton-coupled redox behavior of the V(III)/V(IV) process involving the oxo ligand for the first time. From the dependence of the added p-toluenesulfonic acid to the CV, redox potentials for the following species have been estimated: [V(IV)OCl(tpa)]+/[V(III)OCl(tpa)](E1/2=-1.59 V vs. Fc+/Fc), [V(IV)(OH)Cl(tpa)]2+/[V(III)(OH)Cl(tpa)]+(Epc=-1.34 V), [V(IV)(OH2)Cl(tpa)]3+/[V(III)(OH2)Cl(tpa)]2+(Epa=-0.49 V), and [V(IV)Cl2(tpa)]2+/[V(III)Cl2(tpa)]+(E1/2=-0.89 V). The reduction of [V(V)(O)2(tpa)]+ in 0.05 M [(n-Bu)4N]PF6 acetonitrile showed a major irreversible reduction wave V(V)/(IV) at -1.48 V. The metal reduction potentials of the oxovanadium(IV) and dioxovanadium(V) species are very close, reinforcing the significant influence of the oxo ligand(s).     

Determination of rare earth elements in geological samples by inductively-coupled plasma atomic emission spectrometry after oxalate coprecipitation and cation-exchange column separation

A method for separation and determination of traces of 14 rare earth elements (REEs) in geological samples is described. Determination by inductively-coupled plasma atomic emission spectrometry follows oxalate coprecipitation of the REEs with calcium as carrier and cation- exchange column separation in nitric acid. The combination of the two separation techniques improved the low recoveries found for Sm, Eu, and Gd when only ion-exchange was used, especially for iron- and aluminum-rich samples. The method was applied to the analysis of geological standard materials NBS SRM 688 (basalt), NBS SRM 278 (obsidian), GSJ JB-1 (basalt), GSJ JA- 2 (andesite), and CCRMP SY-3 (syenite). The results were evaluated on the basis of chondrite- normalized rare earth element distribution patterns.     

Production of endohedral 133Xe-fullerene by ion implantation

Ion implantation was applied to the production of endohedral ¹³³Xe-fullerene. Using an isotope separator, ¹³³Xe ions were implanted into a fullerene target of C₆₀ and C₇₀ produced by vacuum evaporation on a Ni backing. An HPLC analysis following dissolution of the fullerene targets in o-dichlorobenzene corroborated the formation of ¹³³Xe@C₆₀ and ¹³³Xe@C₇₀, showing a strong correlation between C₆₀/C₇₀ and ¹³³Xe. The observed tailing following ¹³³Xe peaks in the elution curves suggests a possibility of the isolation of endohedral ¹³³Xe-fullerene from empty fullerene.     

Electronic structure and reactivity of high-spin iron--alkyl- and--pterinperoxo complexes

The spectroscopic properties and electronic structure of the four-coordinate high-spin [FeIII(L3)(OOtBu)]+ complex (1; L3 = hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate; tBu = tert-butyl) are investigated and compared to the six-coordinated high-spin [Fe(6-Me3TPA)(OHx)(OOtBu)]x+ system (TPA = tris(2-pyridylmethyl)amine, x = 1 or 2) studied earlier [Lehnert, N.; Ho, R. Y. N.; Que, L., Jr.; Solomon, E. I. J. Am. Chem. Soc. 2001, 123, 12802-12816]. Complex 1 is characterized by Raman features at 889 and 830 cm-1 which are assigned to the O-O stretch (mixed with the symmetric C-C stretch) and a band at 625 cm-1 that corresponds to nu(Fe-O). The UV-vis spectrum shows a charge-transfer (CT) transition at 510 nm from the alkylperoxo pi v* (v = vertical to C-O-O plane) to a d orbital of Fe(III). A second CT is identified from MCD at 370 nm that is assigned to a transition from pi h* (h = horizontal to C-O-O plane) to an Fe(III) d orbital. For the TPA complex the pi v* CT is at 560 nm while the pi h* CT is to higher energy than 250 nm. These spectroscopic differences between four- and six-coordinate Fe(III)-OOR complexes are interpreted on the basis of their different ligand fields. In addition, the electronic structure of Fe-OOPtn complexes with the biologically relevant pterinperoxo ligand are investigated. Substitution of the tert-butyl group in 1 by pterin leads to the corresponding Fe(III)-OOPtn species (2), which shows a stronger electron donation from the peroxide to Fe(III) than 1. This is related to the lower ionization potential of pterin. Reduction of 2 by one electron leads to the Fe(II)-OOPtn complex (3), which is relevant as a model for potential intermediates in pterin-dependent hydroxylases. However, in the four-coordinate ligand field of 3, the additional electron is located in a nonbonding d orbital of iron. Hence, the pterinperoxo ligand is not activated for heterolytic cleavage of the O-O bond in this system. This is also evident from the calculated reaction energies that are endothermic by at least 20 kcal/mol.     

Monomer-isomerization polymerization. XX. Monomer-isomerization polymerization of 2-, 3-, and 4-octenes with Ziegler–Natta catalyst

A study of the monomer isomerization polymerization of 2-, 3-, and 4-octenes has been made with TiCl₃–(C₂H₅)₃Al catalyst at 80°C in comparison with the ordinary polymerization of 1-octene. It was found that all these octenes underwent monomer-isomerization polymerization to give high-molecular-weight homopolymer consisting exclusively of the 1-octene unit. The addition of an isomerization catalyst such as nickel acetylacetonate accelerated this polymerization. The rates of polymerization were found to decrease in the following order: 1-octene > 2-octene > 3-octene > 4-octene. These results indicate that the isomerization proceeded by a stepwise double-bond migration. It was also found that the monomer-isomerization copolymerization of 2-octene and 2-butene occurred under similar conditions and produced copolymers of both 1-olefin units.     

Levels of artificial radionuclides and uranium in rain water collected from Ibaraki (Japan) following the Tomsk-7 accident in Russia

Measurements of some selected radionuclides were carried out in rain waters collected from Ibaraki Prefecture, Japan, following the nuclear accident at Tomsk-7, Russian Federation, in April 1993. The concentrations obtained for artificial radionuclides were⁹⁰Sr1.8 mBq l^–1,¹³⁷Cs0.1 Bq l^–1,¹³¹I0.1 Bq l^–1 and¹²⁹I4 Bq l^–1. Uranium (²³⁸U) concentrations in rainfalls in April 1993 were 6.3–39 ng l^–1. These data were compared to control values obtained previously and there was no appreciable influence on the radioactivity levels in Japan after the Tomsk-7 accident. Since only limited data on the concentrations of¹²⁹I and uranium in rain water are available, these new analytical results contribute to understanding the background levels for these nuclides.     

An ab initio calculation of symmetric bending and stretching vibrational states of the H3O+ and D3O+ ions

Calculations are reported for the symmetric bending and stretching vibrational states of H₃O⁺ and D₃O⁺ including coupling between these two modes. The calculations were carried out by using a potential surface calculated by the SCF CI method and expressed in terms of symmetric internal coordinates. The transition energy of the ν₂ (1^? ← 0⁺) inversion mode is found to be 985 cm^?1, which is comparable to the experimental value of 954.417 cm^?1 observed by Haese and Oka. The calculated inversion doubling of the lowest state is 51 cm^?1.     

Application of proton induced X-ray emission to the qualitative and quantitative analysis of iodine in biological samples

Particle-induced X-ray emission (PIXE) was applied to evaluate the loss of volatile elements such as iodine in biological samples. The analytical quality of the method is comparable or better than spectrophotometry, which is currently believed to be the most reliable for iodine determination. The temperature dependence of volatility loss of trace iodine was characteristic, and the feature was divided into three temperature regions. The first one, ranging from room temperature to 200 °C, showed only a slight loss below 20% on drying; the second stage, between 200 °C and 350 °C, where carbonizing processes became prominent, showed a remarkable loss up to 50%; the last one, beyond 350 °C, was accompanied by a considerable loss of iodine (more than 80%) with ashing. Even in the analysis using low temperature ashing with oxygen plasma, the loss of iodine observed was considerable (nearly 80%). The significance of these findings by PIXE in trace analysis is noted to improve analytical quality of volatile elements, such as iodine in biological, medical and also environmental fields.     

Monolithic octadecylsilyl-silica gel column for the high-speed ion chromatographic determination of acidity

A monolithic ODS-silica gel column modified by saturating it with lithium dodecylsulfate (Li-DS) was used to demonstrate the high-speed separation of H+ from other mono- and divalent cations, such as Na+, NH4+, K+, Mg2+ and Ca2+ using ion chromatography (IC). Using a 5 mM EDTA-2K solution containing 0.10 mM Li-DS (pH 4.80) as eluent, H+ was eluted with a sharp and symmetrical peak within 1.0 min before other cations at a flow-rate of 1.5 ml min(-1). The rapid elution of H+ and its conductimetric detection could be attributed to the presence of EDTA (HY2-), which can convert H+ ions as anions. i.e. H(+) + H2Y(2-) --> H3Y(-). The acidity of rainwater and deionized water samples was determined using this IC system with satisfactory results.     

Monomer-isomerization polymerization. XXIII.. Monomer-isomerization polymerization of 5-phenyl-2-pentene with ziegler–natta catalysts

5-Phenyl-2-pentene (5Ph2P) was found to undergo monomer-isomerization polymerization with TiCl₃–R₃Al (R = C₂H₅ or i-C₄H₉, Al/Ti > 2) catalysts to give a polymer consisting of exclusively 5-phenyl-1-pentene (5Ph1P) unit. The geometric and positional isomerizations of 5Ph2P to its terminal and other internal isomers were observed to occur during polymerization. The catalyst activity of alkylaluminum examined to TiCl₃ was in the following order: (C₂H₅)₃Al > (i-C₄H₉)₃Al > (C₂H₅)₂AlCl. The rate of monomer-isomerization polymerization of 5Ph2P with TiCl₃–(C₂H₅)₃Al catalyst was influenced by both the Al/Ti molar ratio and the addition of nickel acetylacetonate [Ni(acac)₂], and the maximum rate was observed at Al/Ti = 2.0 and Ni/Ti = 0.4 in molar ratios.