Simultaneous assay of four stereoisomers of diltiazem hydrochloride. Application to in vitro chiral inversion studies

Summary The simultaneous stereospecific assay of four stereoisomers of diltiazem hydrochloride in bulk drug and aqueous solution was developed using HPLC on a Chiralcel OF column. The four isomers were quantitated with good precision by the internal standard method. The chiral inversion of (+)-cis-diltiazem hydrochloride in vitro, stability of its (2S, 3S) configuration in the solid and aqueous states was examined by HPLC. Chiral inversion of (+)-cis-diltiazem hydrochloride was not observed in the solid state, and its (2S, 3S) configuration was stable to heat, humidity and light. Chiral inversion of (+)-cis-diltiazem hydrochloride (2S, 3S) was observed in aqueous solution under UV, but not in aqueous solution stored at 80°C for 5h nor under visible light for 10 h. The (+)-cis-diltiazem hydrochloride (2S, 3S) epimerized to (+)-trans-diltiazem hydrochloride (2R, 3S) with a half-life of 5h in aqueous solution under UV but the reverse chiral inversion of (+)-trans-diltiazem hydrochloride (2R, 3S) to (+)-cis-diltiazem hydrochloride (2S, 3S) was not observed.     

Acidity distribution of carboxyl groups in Loy Yang brown coal: its analysis and the change by heat treatment

Brown coals have a considerable number of acidic functional groups of which the main component is carboxyl groups, and the acidity has a wide distribution. In this paper, changes of the acidity distribution were examined by aqueous titration when brown coal was heat-treated to control its acidity distribution. For Loy Yang brown coal from Australia dried at 50 degrees C under vacuum (LY50), the acid dissociation constant, Ka, was distributed over a wide pKa range between 2 and 9. Then, using Gaussian functions, the acidity distribution was divided into four groups, which were characterized by average pKa values: average pKa value of 3.8 (hereafter referred to as Group A), 5.2 (Group B), 6.8 (Group C), and 8.3 (Group D). Among them, Groups A, B, and C were assigned to carboxyl groups. From the changes of the number of carboxyl groups when brown coal was heat-treated up to 400 degrees C, it was found that the way of decrease was different among these acidic groups. The decrease of the amount of carboxyl groups in Group C was significant, and at 325 degrees C most of them disappeared. On the other hand, the carboxyl groups in Group A remained even at a high temperature of 400 degrees C. We estimated approximately the structures around carboxyl groups for LY50 and their structural changes by heat treatment using the known pKa values for simple carboxylic acids and the pKa values calculated by the MOPAC program for complicated carboxylic acids.     

Furan derivatives. Part 8 On substituent effects in the synthesis of 4,5-dihydro-3H-naphtho[1,8-bc]furans

4,5-Dihydro-3H-naphtho[1,8-bc]furans 4 and 6 which have various substituents (R¹ and R²) have been synthesized from 8-oxo-5,6,7,8-tetrahydro-1-naphthyloxyacetic acids 1 and 3 or their ethyl esters 2 . The reaction of acids 1 and 3 with sodium acetate in acetic anhydride gave a mixture of furans 4 and 6 and lactones 5 and 7 . The ratios of the products were varied according to the types of substituents (R¹ and R²) in acids 1 and 3 . As the substituent R¹ (R² = hydrogen) in acids 1 was changed from hydrogen to a methyl, ethyl or isopropyl group, production of furans 4 became more difficult. However, when a phenyl group was used as the substituent, furan 4 was obtained in good yield. Similarly, as the substituent R² (R¹ = hydrogen) in acids 1 was changed from hydrogen to a methyl, ethyl or isopropyl group, furan formation was more difficult. In contrast, acids 3 which had electron-withdrawing substituents such as chlorine, bromine or a nitro group at the 4-position afforded furans 6 in good yield. 4,5-Dihydro-3H-naphtho[1,8-bc]furans 4 and 4,5-dihydro-3H-naphtho[1,8-bc]furan-2-carbocylic acids 8 were synthesized from the reaction of esters 2 and potassium hydroxide in dioxane. When the substituents R¹ or R² in esters 2 were varied from hydrogen to a methyl, ethyl or isopropyl group the total yields of furans 4 and furancarboxylic acids 8 were reduced.     

Significance of anti-HBc IgM in acute hepatitis and hepatitis B associated chronic liver disease

To determine the diagnostic value of anti-HBc IgM in acute viral hepatitis or chronic liver disease B, Anti-HBc IgM was measured by a RIA and an ELISA in 32 patients with acute hepatitis (4 with type A, 15 with type B and 13 with type non A non B), 18 patients with chronic hepatitis and 19 patients with liver cirrhosis. In acute hepatitis B, anti-HBc IgM (both RIA and ELISA) was positive in 14(93%) of 15 patients and its cut-off index value was very high. However, anti-HBc IgM was always negative in one patient with typical course of type B. In 1 of 4 patients with acute hepatitis A and 2 of 13 with non A non B, anti-HBc IgM (RIA and/or ELISA) was positive. These 3 patients were positive for anti-HBs at the onset of disease, so we could not made the diagnosis of acute hepatitis B. Anti-HBc IgM was positive in 21(51%) of 37 patients with HBsAg-positive chronic liver disease by RIA and in 11 (30%) by ELISA, and its cut-off index value was relatively low. These results suggest that when adequate cut-off index value is established, anti-HBc analysis is useful for differentiating recent and current infections from remote infections.     

Mössbauer spectrometica analysis of thermal decomposition products of phosphate and oxalate coatings on steel

The deterioration of zinc, zinc—calcium and manganese phosphate coatings and oxalate coatings on steel on heating was investigated by conversion electron Mössbauer spectrometry. and the chemical change of the coatings was analysed on the basis of the thermal characteristics of Zn₃(PO₄)₂·4H₂O, Zn₂Fe(PO₄)₄·4H₂O, CaZn₂(PO₄)₂·2H₂O, Fe₃(PO₄)₂·8H₂O. (Mn, Fe)₅H₂(PO₄)₄·4H₂O and FeC₂O₄·2H₂O. The steel substrate beneath the coatings influenced the thermal decomposition and evaporation of coating materials under the various heating atmospheres. The heat resistance of these coatings and the state of the substrate were also investigated.     

Alternating copolymerization of polar vinyl monomers in the presence of zinc chloride. I. Propagation and initiation of the copolymerization of acrylonitrile with styrene copolymer

Copolymerization of acrylonitrile with styrene spontaneously occurred on addition of zinc chloride without addition of any other radical initiator. The composition of the copolymer approached that of strictly alternating copolymer as zinc chloride added to the copolymerization system increased. The significance of the apparent monomer reactivity ratios of this copolymerization system was studied from a kinetic point of view, and it was shown that the monomer sequence distribution is indicated by the apparent monomer reactivity ratios. Further, equations which represent the relation between the apparent monomer reactivity ratios and Q,e values at a given salt concentration were derived. These equations reasonably accounted for the decrease of the apparent monomer reactivity ratios of the copolymerization of acrylonitrile with styrene in the presence of zinc chloride and the behavior of the other acrylonitrile copolymerization systems in the presence of zinc chloride. The initiation step of the spontaneous radical copolymerization of acrylonitrile with styrene in the presence of zinc chloride was explained by a cross-initiation mechanism.     

Gas chromatography of hydrocarbons using packed liquid chromatographic capillary columns

Capillary columns of 0.3-0.5 mm i.d. packed with 3- to 30-μm silica-based stationary phases for liquid chromatography were used for gas chromatographic separation of hydrocarbons. Column efficiencies were evaluated for various commercially available packing material. The best column efficiency was achieved with 5-μm octadecyl group bonded silica gel, the surface of which was coated with a poly (dimethylsiloxane) film. The 30-cm column produced 11,000 theoretical plates.     

Studies directed towards the asymmetric total synthesis of antileukemic lignan lactones. Synthesis of optically pure key intermediate and its utility

By the self-immolative asymmetric synthesis, optically pure key intermediate β-piperonyl-γ-lactone (R)-(+)-$\text{6}$ was found to be prepared in reasonable yield from the easily available chiral γ-lactone synthon ($\text{1}$) which had been also reported to give an antipode (S)-(-)-$\text{6}$. The optically pure (R)-(+)-$\text{6}$ was shown to be converted successfully into several optically pure natural lignan lactones.     

Synthesis of new azonia-helicenes with a quaternary nitrogen at the inner helix skeleton

The 16c-azonia[6]helicene salts, in which a carbon atom at the inner helix skeleton of [6]helicene is replaced by a quaternary nitrogen atom, have been synthesized by photo-induced intramolecular quater-nization of 2-[2-(1-chloronaphthyl)vinyl]benzo[h]quinolines in acetonitrile.