Operating Limits for Stable Growth of Silicon Fibers with Diameter Less Than 150 μm by Modified μ-PD Method

The μ-PD method originally developed for oxide crystals has been modified and applied for filamentary silicon crystal growth. Our main modification of μ-PD method is concerned with an arrangement of melt permeable feeder which is inserted into the nozzle. The feeder finishes by a sharp tip the diameter of which (is almost the same as that of the desired semiconductor fiber, i.e., less than 150 μm. Silicon fibers were grown from the small liquid pool at the end of the feeder. Three types of crucible-die arrangement were designed and tested. The best results were obtained with the help of inclined insert made of graphite fibers because of its ability to quench oscillations and longer operation life. Fiber crystals, 100 μm in diameter and 70 mm in length, have been grown successfully. Small meniscus stability, operating limits of μ-PD method and silicon carbide formation during the growth process are discussed.     

Command surfaces, 20. Fixation of surface-assisted homogeneous alignment of nematic liquid crystals by cationic photopolymerization

The surface-assisted alignment of a nematic liquid crystal yields a persistent ordered structure upon cationic photopolymerization of liquid-crystalline epoxides. Linearly polarized light irradiation of a photocrosslinkable polymer containing azobenzene moieties played a crucial role in this procedure since the photoinduced alignment is not deteriorated by heating for polymerization.     

Aniline-terephthalaldehyde resin p-toluenesulfonate (ATRT) as a highly efficient and reusable catalyst for alcoholysis,hydrolysis, and acetolysis of epoxides

Alcoholysis, hydrolysis, and acetolysis of epoxides were carried out in the presence of a catalytic amount of aniline-terephthalaldehyde resin p-toluenesulfonate (ATRT) to give the corresponding β-substituted alcohols in good yields. Alcoholysis and hydrolysis of epoxides catalyzed by ATRT proceeded faster than those by pyridinium p-toluenesulfonate (PPTS).     

Massive rigid string model and its supersymmetric extension

We discuss a rigid string model proposed by Casalbuoni and Longhi. Constraints for the massive states are solved to find the physical states and the mass spectrum. We also find its supersymmetric extension with the kappa symmetry. The supersymmetry transformations are found starting from on-shell transformations using the Dirac bracket.     

Depth-adaptive regularized reconstruction for reflection diffuse optical tomography

We study reflection diffuse optical tomography using two-dimensional (2D) continuous-wave source-detector arrays on the surface of semi-infinite medium, aiming at imaging the perfusion and the hemoglobin oxygen saturation variation of human cerebral cortex with brain activation. We had previously formulated the inverse problem with Moore-Penrose inversion. When we use simple regularization in this inverse problem, the reconstruction sensitivity decreases markedly with the depth so that the signal in the deep range may be masked by an unwanted signal in the shallow range. In this paper, we propose a depth-adaptive regularized reconstruction, in which we assign a smaller regularization parameter with the depth. We demonstrate improvement of the three-dimensional (3D) reconstruction uniformity using the proposed scheme.     

Numerical analysis of dipole sound source around high speed trains

As the maximum speed of high speed trains increases, the effect of aeroacoustic noise on the sound level on the ground becomes increasingly important. In this paper, the distribution of dipole sound sources at the bogie section of high speed trains is predicted numerically. The three-dimensional unsteady flow around a train is solved by the large eddy simulation technique. The time history of vortices shows that unstable shear layer separation at the leading edge of the bogie section sheds vortices periodically. These vortices travel downstream while growing to finally impinge upon the trailing edge of the section. The wavelength of sound produced by these vortices is large compared to the representative length of the bogie section, so that the source region can be regarded as acoustically compact. Thus a compact Green's function adapted to the shape can be used to determine the sound. By coupling the instantaneous flow properties with the compact Green's function, the distribution of dipole sources is obtained. The results reveal a strong dipole source at the trailing edge of the bogie section where the shape changes greatly and the variation of flow with time is also great. On the other hand, the bottom of the bogie section where the shape does not change, or the leading edge and boundary layer where the variation of flow with time is small, cannot generate a strong dipole source.     

Effect of crystallite size on the thermal phase change and porous properties of boehmite

The effect of crystallite size on the thermal phase change and porous properties of boehmite was investigated using boehmites with crystallite sizes of 2.9 to 24.4 nm and boehmite gels prepared by precipitation and hydrothermal methods. The dehydroxylation temperature of boehmite increases, its phase transition temperature from gamma- to theta-Al(2)O(3) decreases and the theta- to alpha-Al(2)O(3) transition temperature increases as the crystallite size of the boehmite increases. Boehmite with a crystallite size of approximately 5 nm shows the highest specific surface area and greatest thermal stability. This boehmite contains pores of about 2-3 nm radius, suggested to be responsible for the superior porous properties and thermal stability.