Thermal and photochemical rearrangements of 1,4-dithiin sulfoxides

Thermolysis of 2,5-diphenyl-1,4-dithiin-1-oxide afforded 2-formyl-2,4-diphenyl-1,3-dithiole, which was obtained also in photolysis along with another rearranged product, 2-benzoyl-4-phenyl-1,3-dithiole.     

Preparation of Polycrystalline Antimonic Acid Films by Electrophoretic Deposition

Cubic antimonic acid (Sb₂O₅·nH₂O) films were successfully prepared on stainless steel and Si(100) substrates by electrophoretic deposition (EPD) using two types of sols. The sols were prepared by reacting an H₂O₂ aqueous solution with Sb(O-i-C₃H₇)₃ or metallic Sb powder. The resulting films were found to consist of fine particles of cubic Sb₂O₅·nH₂O single crystals with uniform particle sizes of 30 nm and 150 nm. The weight of the Sb₂O₅·nH₂O deposit on the anode Si(100) substrate by EPD increased linearly with the current density in the range of 0–0.67 mA cm^–2, when the sol pH was over 7. The proton conductivity of the polycrystalline Sb₂O₅·nH₂O discs, formed from the two types of sols, was evaluated by an ac impedance method at room temperature under controlled levels of relative humidity.     

Ion-Pair Solvent Extraction of EDTA Anions with Tetraalkylammonium Ions in Various Organic Solvents

Summary.  The ion-pair solvent extraction behavior of ethylenediaminetetraacetate (EDTA) anion by various tetraalkylammonium ions was investigated at 25.0 ± 0.1°C. The extraction of EDTA exceeded 90% from the basic aqueous solution into the organic solvents such as n-hexane and benzene derivatives containing tri-n-octylmethylammonium chloride, but EDTA was hardly extracted from acidic solution. Among the chemical species of EDTA in aqueous solution, edta ⁴⁻ is the most extractable one. On the other hand, the extraction of EDTA was less than 1% into chloroform and 1,2-dichloroethane even from the basic aqueous solution. The effect of the structure of alkylammonium ion was also examined. Tetra-n-hexylammonium and tetra-n-octylammonium ions could not extract EDTA even from the basic aqueous solution, while the use of tri-n-octylmethylammonium and di-n-lauryldimethylammonium ions enhances the extraction of EDTA. These results suggest that the steric hindrance in the ion-pair of alkylammonium and EDTA anion in the organic phase affects the extractability of EDTA containing ion-pair. The solution structure of ion-pair in the organic phase was calculated by MMFF force field and the steric effect in the ion-pair was also suggested. From the extraction constants obtained, the possibility of the extraction separation of EDTA has been shown. Present address: Chemistry Department, Heilongjiang University, Harbin, China     

Ion-exclusion chromatography with conductimetric detection of aliphatic carboxylic acids on a weakly acidic cation-exchange resin by elution with benzoic acid-beta-cyclodextrin

In this study, an aqueous solution consisting of benzoic acid with low background conductivity and beta-cyclodextrin (beta-CD) of hydrophilic nature and the inclusion effect to benzoic acid were used as eluent for the ion-exclusion chromatographic separation of aliphatic carboxylic acids with different pKa values and hydrophobicity on a polymethacrylate-based weakly acidic cation-exchange resin in the H+ form. With increasing concentration of beta-cyclodextrin in the eluent, the retention times of the carboxylic acids decreased due to the increased hydrophilicity of the polymethacrylate-based cation-exchange resin surface from the adsorption of OH groups of beta-cyclodextrin. Moreover, the eluent background conductivity decreased with increasing concentration of beta-cyclodextrin in 1 mM benzoic acid, which could result in higher sensitivity for conductimetric detection. The ion-exclusion chromatographic separation of carboxylic acids with high resolution and sensitivity was accomplished successfully by elution with a 1 mM benzoic acid-10 mM cyclodextrin solution without chemical suppression.     

Unexpected formation of benzaldehydes by the reactions of dithioacetals derived from cinnamaldehydes with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents

1,3-Dithianes 1 , 1,3-dithiolanes 2 , and diphenyl dithioacetals 3 derived from cinnamaldehydes reacted with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents to give benzaldehydes 4 . Hydride transfer from 1–3 to 2,3-dichloro-5,6-dicyano-p-benzoquinone followed by hydrolysis and oxidative carbon-carbon bond cleavage would produce benzaldehydes 4 .     

Dependence of molecular recognition of fullerene derivative on the adlayer structure of zinc octaethylporphyrin formed on Au(100) surface

Adlayers of ZnOEP were prepared on reconstructed Au(100)-(hex) and unreconstructed Au(100)-(1 x 1) surfaces by immersing into a benzene solution containing ZnOEP molecules, and the adlayer structures were characterized by scanning tunneling microscopy (STM). A hexagonally arranged ZnOEP array was formed on an Au(100)-(hex) surface, whereas a rectangularly arranged ZnOEP array was found on an Au(100)-(1 x 1) surface. The adlayer structure of ZnOEP was dependent upon the underlying Au atomic arrangements. Furthermore, an investigation of the spuramolecular assembly for these modified surfaces was carried out by using an open-cage C(60) derivative (opened C(60)). A supramolecular assembled adlayer with a 1:1 composition of opened C(60)/ZnOEP was formed on Au(100)-(hex), whereas aggregates of opened C(60) were found on the ZnOEP-modified Au(100)-(1 x 1) surface. Electrochemical responses of opened C(60) were significantly influenced by underlying ZnOEP arrays. This finding suggests that precise control of underlying ZnOEP adlayers with the Au atomic structure is important to recognize the opened C(60) on them.     

Chiral ligand-controlled asymmetric conjugate addition of alpha-trimethylsilanylacetate to acyclic and cyclic enones

The reaction of lithium ester enolate with enones provides a challenge for chemoselectivity, that is, discrimination between a conjugate addition and a 1,2-addition. Asymmetric conjugate addition of a lithium enolate of alpha-trimethylsilanylacetate to acyclic and cyclic alpha,beta-unsaturated ketones was mediated by an external chiral ligand to give the corresponding 1,4-adducts in good enantioselectivity of 74% and good chemoselectivity.     

Potentiometric stripping determination of heavy metals using a graphite-reinforcement carbon vibrating electrode

Potentiometric stripping determination of Cd, Cu and Zn using a vibrating electrode (VE) is presented. A simple VE was constructed by using a piezoelectric bimorph oscillator and an inexpensive graphite-reinforcement carbon (GRC) rod (a mechanical pencil). Experimental results obtained with the simple VE follow the equation valid for quantitative application of potentiometric stripping analysis (PSA) in large solutions. It was found that the GRC vibrating electrode is suitable for multielement trace analysis of small samples of 0.05 mL. The relative standard deviations for divalent metals are better than 2%. Received: 3 February 1997 / Revised: 2 June 1997 / Accepted: 7 June 1997     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.