Key Factors for Simultaneous Improvements of Performance and Durability of Core‐Shell Pt3Ni/Carbon Electrocatalysts Toward Superior Polymer Electrolyte Fuel Cell

It remains a big challenge to remarkably improve both oxygen reduction reaction (ORR) activity and long‐term durability of Pt?M bimetal electrocatalysts simultaneously in the harsh cathode environment toward widespread commercialization of polymer electrolyte fuel cells (PEFC). In this account we found double‐promotional effects of carbon micro coil (CMC) support on ORR performance and durability of octahedral Pt₃Ni nanoparticles (Oh Pt₃Ni/CMC). The Oh Pt₃Ni/CMC displayed remarkable improvements of mass activity (MA; 13.6 and 34.1 times) and surface specific activity (SA; 31.3 and 37.0 times) compared to those of benchmark Pt/C (TEC10E20E) and Pt/C (TEC10E50E‐HT), respectively. Notably, the Oh Pt₃Ni/CMC revealed a negligible MA loss after 50,000 triangular‐wave 1.0–1.5 V_RHE (startup/shutdown) load cycles, contrasted to MA losses of 40 % (TEC10E20E) and 21.5 % (TEC10E50E‐HT) by only 10,000 load cycles. It was also found that the SA increased exponentially with the decrease in the CO stripping peak potential in a series of Pt?M/carbon (M: Ni and Co), which predicts a maximum SA at the curve asymptote. Key factors for simultaneous improvements of performance and durability of core‐shell Pt₃Ni/carbon electrocatalysts toward superior PEFC is also discussed.     

Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

Insoluble monolayers of irisresorcinol at the air/water interface

Monolayer properties of irisresorcinol [5-(cis-10-heptadecenyl) resorcinol] were measured at the air/water interface. TheA-T isobars of the monolayers at 10 and 15 mN/m gave two-dimensional thermal expansivities of 1.4 × 10^–4/K and 1.3 × 10^–4/K at a temperature span from 7–40 C, respectively. The- A isotherms of the material showed only a little dependence on temperature from 5–35 C and onpH except at highpH, where monolayers expanded by ionization of resorcinol headgroups. Some types of saccharose in the subphase exhibited a characteristic interaction with irisresorcinol in monolayers, and there is a possibility that this material will be used for molecular recognition of some saccharoses.     

TYROSINE-SENSITIZED PHOTODIMERIZATION OF THYMINE IN AQUEOUS SOLUTION

Abstract. Photodimerization of thymine in aqueous solution in the presence of tyrosine was studied with monochromatic UV irradiation. The total dimer formation was sensitized in the presence of tyrosine. The action spectrum of sensitized total dimer formation has a peak near 280 nm corresponding to the absorption maximum of tyrosine. Triplet quenchers reduced the sensitization substantially. It seems probable that tyrosine-sensitized photodimerization of thymine occurred via triplet-triplet energy transfer from tyrosine to thymine.     

Ammonia chemical ionization tandem mass spectrometry in structural determination of alkaloids. II. Tetraponerines from pseudomyrmecine ants

Chemical ionization tandem mass spectrometry (CI-MS/MS) of alkaloids with ammonia reagent gas and collision-activated dissociation as well as EI-MS/MS were applied to the tetraponerine alkaloids in extracts from six pseudomyrmecine ants of the genus Tetraponera. The MS/MS techniques along with gas chromatography Fourier transform infrared (GC/FTIR) spectra allowed identification in two extracts of seven of the eight known tetraponerines. The EI-MS/MS fragmentations proved diagnostic for the ring system and the CI-MS/MS patterns for the C-8 or C-9 substitution, while the Bohlmann bands in FTIR spectra were diagnostic for the C-8 or C-9 configurations. An Indian ant (T. allaborans) had T-2, T-4 and T-8, while a Chinese ant (T. binghami) had T-5, T-6, T-7 and T-8. Four other ants, T. rufonigra (India), T. penzigi (Africa), T. clypeata (Africa) and T. sp. cf. emeryi (Africa), had no tetraponerines.     

Polycyclic N‐Heterocyclic Compounds,Part 72: Reaction of N‐([1]Benzofuro (or Benzothieno)[3,2‐d]pyrimidin‐4‐yl)formamidine and N‐(Pyrido[2,3‐d]pyrimidin‐4‐yl)formamidine Derivatives with Hydroxylamine Hydrochloride

The reactions of N‐([1]benzofuro[3,2‐d]pyrimidin‐4‐yl)formamidines with hydroxylamine hydrochloride gave rearranged cyclization products via ring cleavage of the pyrimidine component accompanied by a ring closure of the 1,2,4‐oxadiazole to give N‐[2‐([1,2,4]oxadiazol‐5‐yl)[1]benzofuran‐3‐yl)formamide oximes. N‐([1]Benzothieno[3,2‐d]pyrimidin‐4‐yl)formamidines and N‐(pyrido[2,3‐d]pyrimidin‐4‐yl)formamidines with hydroxylamine hydrochloride gave similar results.     

Multiple plasmonic effect on photocurrent generation of metal‐loaded titanium dioxide composite/dye films on gold grating surface

We demonstrate the multiple plasmonic effect on the photocurrent properties of photoanodes containing Ag or Au nanoparticles (NPs) loaded onto titanium dioxide film (Ag–TiO₂ or Au–TiO₂) on Au grating surfaces. Ag–TiO₂ or Au–TiO₂ nanocomposite particles are prepared by a flame spray pyrolysis route. The structures and morphologies of the prepared products are characterized by high‐resolution transmission electron microscopy. The Ag–TiO₂ or Au–TiO₂ composite NPs are deposited by spin coating onto the Au grating surfaces. The photoanode electrode is a layered structure of blu‐ray disc‐recordable grating substrate/Au/Ag (or Au)–TiO₂/dye/electrolyte/indium‐tin oxide. The plasmonic effect is induced when Ag or Au NPs are located within the propagating surface plasmon (SP) field on the Au grating surface. The short‐circuit photocurrent is increased by exciting the grating‐coupled propagating SP on the Au gratings and is further enhanced by positioning the Ag or Au NPs within the grating‐coupled SP field. Copyright © 2014 John Wiley & Sons, Ltd.     

Contribution of conformational change of polymer structure to electrochemomechanical deformation based on polyaniline

The pH dependencies of electrochemomechanical deformation (ECMD) including the cyclic voltammetry and the expansion ratio in conducting polymers, polyaniline (PANI), and poly(o-methoxyaniline) film were studied to elucidate the mechanisms. It was found that the ECMD is governed by the conformational change of polymer structure as well as the insertion of bulky ions in the manner of comparable magnitude. Expansion ratios >20% in the ECMD were demonstrated for the thickness direction of PANI film. The results suggest that the magnitude of ECMD can be improved by choosing the preparation method of films.