Evaluation ofwaste perlite fines in the production of construction materials

The use of supplementary cementitious materials (SCM) is a well established practice worldwide in the manufacture of Portland cement (PC)-based construction materials. While utilisation of industrial by-products has been successful, the potential of mining wastes is yet to receive adequate attention in the context of construction materials. In an expanded form perlite, which is a naturally occurring, hydrated volcanic siliceous glass, is an ideal material as a lightweight aggregate for use in a wide range of construction materials including concrete. The mining and processing of the grades of perlite required for the production of lightweight aggregate results in the creation of a fine grained waste which currently has no economic value. This paper reports preliminary data on the utilisation of waste perlite fines as a SCM in calcium silicate-based construction material and discusses the potential of this mining waste to reduce the environmental impact of the production of conventional cement-based construction materials.     

Quantum NOT operation and integrability in two-level systems

We demonstrate the surprising integrability of the classical Hamiltonian associated to a spin 1/2 system under periodic external fields. The one-qubit rotations generated by the dynamical evolution is, on the one hand, close to that of the rotating wave approximation (RWA), on the other hand to two different “average” systems, according to whether a certain parameter is small or large. Of particular independent interest is the fact that both the RWA and the averaging theorem are seen to hold well beyond their expected region of validity. Finally, we determine conditions for the realization of the quantum NOT operation by means of classical stroboscopic maps.     

On the capacitated vehicle routing problem

 We consider the Vehicle Routing Problem, in which a fixed fleet of delivery vehicles of uniform capacity must service known customer demands for a single commodity from a common depot at minimum transit cost. This difficult combinatorial problem contains both the Bin Packing Problem and the Traveling Salesman Problem (TSP) as special cases and conceptually lies at the intersection of these two well-studied problems. The capacity constraints of the integer programming formulation of this routing model provide the link between the underlying routing and packing structures. We describe a decomposition-based separation methodology for the capacity constraints that takes advantage of our ability to solve small instances of the TSP efficiently. Specifically, when standard procedures fail to separate a candidate point, we attempt to decompose it into a convex combination of TSP tours; if successful, the tours present in this decomposition are examined for violated capacity constraints; if not, the Farkas Theorem provides a hyperplane separating the point from the TSP polytope. We present some extensions of this basic concept and a general framework within which it can be applied to other combinatorial models. Computational results are given for an implementation within the parallel branch, cut, and price framework SYMPHONY. Received: October 30, 2000 / Accepted: December 19, 2001 Published online: September 5, 2002 Key words. vehicle routing problem – integer programming – decomposition algorithm – separation algorithm – branch and cut Mathematics Subject Classification (2000): 20E28, 20G40, 20C20     

Electron paramagnetic resonance and optical absorption spectra of Cr ions in cadmium phosphate glass

EPR and optical absorption investigations of chromium doped cadmium phosphate glass are carried out. Crystal field, spin-Hamiltonian and bonding parameters are evaluated. From the results and analyses of the EPR and optical studies, the site symmetry of Cr³⁺ ion in the glass is ascribed to a distorted octahedron. The bonding parameters suggest the ionic nature of Cr³⁺ ion with the ligands.     

Nanometric Antimony Powder Synthesis by Activated Alkaline Hydride Reduction of Antimony Pentachloride

A novel chemical reduction method using an activated alkaline hydride (LiH or NaH-t-BuONa) in tetrahydrofuran solvent has been applied to antimony salt reduction. X-ray diffraction and transmission electron microscopy studies have been carried out to characterize the morphology and structure of the materials. Alkali hydride nature influence has been proved. In both cases the process allows to prepare antimony particles in nanometer range from few nanometers to about 20nm which could be used as anodic materials for lithium–ion batteries. With lithium hydride well-crystallized particles inclined to agglomeration were observed whereas finely dispersed amorphous particles were pointing out after activated sodium hydride reduction.     

Isotopic production cross sections of residues in reactions induced by relativistic heavy ions with protons and deuterons

The isotopic production cross sections of heavy residues in relativistic heavy-ion collisions have been investigated in inverse kinematics. The primary reaction products were fully identified in mass and atomic number prior to beta decay using the fragment separator FRS. The huge collection of data obtained helps in the understanding of the two main reaction mechanisms involved: fragmentation and fission. These data provide basic information for future radioactive ion beam facilities and for technical applications like intense neutron sources by means of spallation targets.     

Studies on the curing kinetics of epoxy resins using mixture of nadic/or maleic anhydride and 4,4′-diaminodiphenyl sulfone

Curing kinetics of diglycidyl ether of bisphenol-A (DGEBA) in the presence of maleic anhydride (MA)/or nadic anhydride (NA) or mixture of MA/NA: 4,4′-diaminodiphenyl sulfone (DDS) in varying molar ratios were investigated using differential scanning calorimetry. Curing behaviour of DGEBA in the presence of varying amounts of DDS:MA/NA was evaluated by recording DSC scans at heating rates of 5, 10, 15 and 20°C min⁻¹. The peak exotherm temperature depends on the heating rate, structure of the anhydride as well as on the ratio of anhydride: DDS. Thermal stability of the isothermally cured resins was evaluated by thermogravimetry. The char yield was highest in case of resins cured using mixture of DDS:MA (0.75:0.25; sample EM-1) and DDS:NA (0.75:0.25, sample EN-1).     

Two-dimensional phased arrays for surgical applications: Multiple focus generation and scanning

A numerical simulation and a comparative analysis of the acoustic fields produced by two-dimensional phased arrays intended for ultrasonic surgery are performed for the case of a multiple focus (in particular, 25 foci) generation. The calculations were conducted for arrays (with an operating frequency of 1.5 MHz) consisting of 256 elements 5 mm in diameter, which were positioned on the array surface both regularly and randomly. The array foci can be formed simultaneously, but, in this case, the intensity levels of the secondary peaks in the ultrasonic field can exceed the values that guarantee the safe application of this method in surgery. A much safer way is to synthesize many foci with the use of several configurations, each of which contains a smaller number of foci. The number of foci in individual configurations must be approximately the same. It is demonstrated that randomization of the element distribution over the array surface provides an opportunity to improve the array performance, to reduce the intensity levels of secondary peaks in the acoustic field, and to increase the array capability for multiple focus scanning off the array axis.     

Duality theorems for convex problems with time delay

In this paper, we examine a class of convex problems of Bolza type, involving a time delay in the state. It encompasses a variety of time-delay problems arising in the calculus of variations and optimal control. A duality analysis is carried out which, among other things, leads to a characterization of minimizers in terms of the Euler-Lagrange inclusion. The results obtained improve in significant respects on what is achievable by techniques previously employed, based on elimination of the time delay by introduction of an infinite-dimensional state space or on the method of steps.