Effect of Phase Arrangement on Solid State Mechanical and Thermal Properties of Polyamide 6/Polylactide Based Co-polyester Blends

The main goal of this work is to correlate morphological parameters of the binary blend of polyamide 6 (PA6) and a polylactide (PLA) based biodegradable co-polyester blend (BioFlex) (scanning electron microscopy, solvent extraction method) with the solid-state mechanical properties (stress strain analysis) as well as thermal (differential scanning calorimetry) and selected physico-chemical characteristics (Fourier transform infrared spectroscopy and water uptake analysis). The blends of PA6/BioFlex were prepared in ratios of 100/0, 90/10, 75/25, 60/40, 50/50, 40/60, 25/75, 10/90 and 0/100 in wt.%. The occurrence of co-continuous morphology was observed within the range of 40 to 60 wt.% of BioFlex. Furthermore, the results show that the co-continuous morphology of PA6/BioFlex blends significantly affected both tensile (E modulus) and thermal properties (melting enthalpy) of the blends. In the case of the tensile properties, the effect of the morphological arrangement was strongly dependent on the deformation range. The presence of BioFlex in the blends reduced the crystallizability of PA6 noticeably. Co-continuous structure formation was observed to have a significant effect on the melting enthalpy of the blend. Composition morphology dependent responses were observed in the case of the FTIR and water uptake studies.     

Photocatalytic activity of visible light-responsive TiO<Subscript>2</Subscript> thin films deposited on various anodized Ti-metal substrates by a RF magnetron sputtering method

Visible light-responsive TiO₂ (Vis-TiO₂) thin film has been deposited on two different kinds of anodized Ti-metal substrates, i.e., plate-type Titanystar (P-Titanystar) or non-woven fabric Titanystar (N-Titanystar) by a radio-frequency magnetron sputtering (RF-MS) method. These Vis-TiO₂ thin film photocatalysts (Vis-TiO₂/P-Titanystar and Vis-TiO₂/N-Titanystar) showed high activity for the oxidation of 2-propanol in water under UV light irradiation while Vis-TiO₂/N-Titanystar showed higher activity than Vis-TiO₂/P-Titanystar. Furthermore, photocatalytic activity of Vis-TiO₂/N-Titanystar was enhanced by the Pt deposition by an RF-MS deposition method. Pt loaded Vis-TiO₂/N-Titanystar (Pt-Vis-TiO₂/N-Titanystar) acted as an efficient photocatalyst for the oxidation of methanol vapor under UV light irradiation even in a flow system. Moreover, it was found that Pt-Vis-TiO₂/N-Titanystar is an effective photocatalyst for the oxidation of various organic compounds in gas phase or ammonia gas even under visible light irradiation (λ > 420 nm) at 293 K.     

C sp 3-H bond activation triggered by formation of metallacycles: rhodium(I)-catalyzed cyclopropanation/cyclization of allenynes

Giving direction: An C?sp?3-H bond activation directed by a rhodacycle intermediate has been found to occur in a Rh(I)-catalyzed reaction between an allene moiety having a tert-butyl substituent, and tethered alkynes. Cyclic compounds containing a cyclopropane ring were obtained in good to high yields (up to 92%).     

Design and synthesis of anti-barnacle active fluorescence-labeled probe compounds and direct observation of the target region in barnacle cypris larvae for dimethyl-isocyanoalkyl compounds

Anti-barnacle active fluorescence-labeled probe compounds were synthesized, and the interaction between the synthesized probe compounds and the cypris larvae of barnacles was observed under a fluorescence microscope. The observation suggests that anti-fouling active isocyano substances would express activity by acting on the oil cell area in barnacle cypris larvae.     

Nucleophilic Aromatic Substitution Reactions of meso‐Bromosubporphyrin: Synthesis of a Thiopyrane‐Fused Subporphyrin

meso‐Bromosubporphyrin undergoes nucleophilic aromatic substitution (S_NAr) reactions with arylamines, diarylamines, phenols, ethanol, thiophenols, and n‐butanethiol in the presence of suitable bases to provide the corresponding substitution products. The S_NAr reactions also proceed well with pyrrole, indole, and carbazole to provide substitution products in moderate to good yields. Finally, the S_NAr reaction with 2‐bromothiophenol and subsequent intramolecular peripheral arylation reaction affords a thiopyrane‐fused subporphyrin.     

Magnetic sponge prepared with an alkanedithiol-bridged network of nanomagnets

The magnetic dipole-dipole interaction between nanomagnets having huge magnetic moments can have a strength comparable to that of the van der Waals interaction between them, and it can be manipulated by applying an external magnetic field of conventional strength. Therefore, the cooperation between the dipole-dipole interaction and the applied magnetic field allows the magnetic moments of nanomagnets to be aligned and organized in an ordered manner. In this work, a network of magnetic nanoparticles connected with flexible long-alkyl-chain linkers was designed to develop a "magnetic sponge" capable of absorbing and desorbing guest molecules with changes in the applied magnetic field. The magnetization of the sponge with long-alkyl-chain bridges (30 C atoms) exhibited a 500% increase after cooling in the presence of an applied field of 7 T relative to that in the absence of a magnetic field. Cooling in a magnetic field leads to anisotropic stretching in the sponge due to reorganization of the nanomagnets along the applied field, in contrast to the isotropic organization under zero-field conditions. Such magnetic-responsive organization and reorganization of the magnetic particle network significantly influences the gas absorption capacity of the nanopores inside the material. The absorption and desorption of guests in an applied magnetic field at low temperature can be regarded as a fascinating "breathing feature" of our magnetic sponge.     

Determination of Cr(III) and Cr(VI) in water by wavelength‐dispersive X‐ray fluorescence spectrometry after preconcentration with an ion‐exchange resin disk

A rapid and simple method using an ion‐exchange resin disk combined with wavelength‐dispersive X‐ray fluorescence (WDXRF) spectrometry was developed for the determination of Cr(III) and Cr(VI) in water. A 100‐ml water sample was first adjusted to pH 3 with nitric acid and then passed through an anion‐exchange resin disk placed on top of a cation‐exchange resin disk at a flow rate of 1 ml min^?1 to separate Cr(III) and Cr(VI). Anionic Cr(VI) was preconcentrated on the upper anion‐exchange resin disk, whereas cationic Cr(III) was preconcentrated on the lower cation‐exchange resin disk. Each ion‐exchange resin disk was dried at 100 °C for 30 min in an electric oven and coated with a commercially available laminate film. The specimens were measured using a WDXRF spectrometer. The calibration curves of Cr(III) and Cr(VI) showed good linearity in the range 1–10 µg. The detection limits corresponding to three times the standard deviation (n = 5) of blank values were 0.17 µg for Cr(III) and 0.16 µg for Cr(VI). If a 1‐l water sample is used, these limits would be 0.17 and 0.16 µg l^?1, respectively. A spike test for 50 µg l^?1 Cr(III) and Cr(VI) in tap water and river water showed quantitative recoveries (94–114%), although this was not observed for mineral drinking water owing to the overlap of V Kβ with Cr Kα. The recovery after overlap correction was satisfactory (115%). Copyright © 2011 John Wiley & Sons, Ltd.