Morphology of solution crystallized trans-1,4-polyisoprene

The film formation method has been successfully used to grow single crystals and other complex morphological features of low melting form (LMF) and high melting form (HMF) of trans-1,4-polyisoprene (TPIP). Below 40 °C dilute amyl acetate solution gave hexagonal shaped LMF crystals. Thick and elongated hexagonal shaped morphology was shown by HMF crystals at temperatures above 40 °C. Straight faces and sharp corners of the single crystals, and also of complex crystals, acquired round shapes when highly polydispersed TPIP was used for crystallization.     

Host-guest interactions template: the synthesis of a [3]catenane

Formation of a [3]catenane containing dibenzo-24-crown ether wheels and a large dipyridiniumethane ring is templated by formation of a host-guest adduct between the [3]catenane and the external crown ether.     

Mixed micelles of tetradecyltrimethylammonium bromide and chlorhexidine digluconate in aqueous solutions of isopropyl alcohol

The influence of isopropyl alcohol (IPA) on the size and composition of the mixed micelles in mixtures of tetradecyltrimethylammonium bromide (TTAB) and chlorhexidine digluconate (CG) has been determined as a function of the composition of the systems. The addition of 0.5 M and 1.0 M IPA had little significant effect on the composition of the mixed micelles as determined both by analysis of critical micelle concentration (CMC) data using a theoretical treatment based on excess thermodynamic quantities and by an empirical treatment of conductivity data. Static and quasielastic light scattering measurements showed a progressive decrease of the aggregation number and hydrodynamic radius of TTAB micelles on addition of IPA, but minimal changes in the properties of the small CG aggregates. The results show that the micellar weight in the TTAB/CG/IPA solutions is determined by the ratio of the surfactants in the system and for each TTAB/CG ratio decreases on addition of IPA.     

o-hydroxylmethylphenylchalcogens: synthesis, intramolecular nonbonded chalcogen...OH interactions, and glutathione peroxidase-like activity

[Structure: see text]. The synthesis and characterization of a series of organochalcogen (Se, Te) compounds derived from benzyl alcohol 13 are described. The synthesis of the key precursor dichalcogenides 15, 22, and 29 was achieved by the ortho-lithiation route. Selenide 18 was obtained by the reaction of the dilithiated derivative 14 with Se(dtc)2. Oxidation of 15 and 22 with H2O2 afforded the corresponding cyclic ester derivatives 17 and 24, respectively. Oxidation of selenide 18 with H2O2 affords the spirocyclic compound 19. The presence of intramolecular interactions in dichalcogenides 15 and 22 has been proven by single-crystal X-ray studies. The cyclic compounds 17 and 19 have also been characterized by single-crystal X-ray studies. GP(X)-like antioxidant activity of selenium compounds has been evaluated by the coupled bioassay method. Density functional theory calculations at the mPW1PW91 level on ditelluride 22 have identified a fairly strong nonbonding interaction between the hydroxy oxygen and tellurium atom. The second-order perturbation energy obtained through NBO analysis conveys the involvement of n(O) --> sigma(Te-Te) orbital overlap in nonbonding interaction. Post wave function analysis with the Atoms in Molecules (AIM) method identified distinct bond critical point in 15 and 22 and also indicated that the nonbonding interaction is predominantly covalent. Comparison between diselenide 15 and ditelluride 22 using the extent of orbital interaction as well as the value of electron density at the bond critical points unequivocally established that a ditelluride could be a better acceptor in nonbonding interaction, when the hydroxy group acts as the donor.     

Directed evolution experiments reveal mutations at cycloartenol synthase residue His477 that dramatically alter catalysis

[reaction: see text] Cycloartenol synthase cyclizes and rearranges oxidosqualene to the protosteryl cation and then specifically deprotonates from C-19. To identify mutants that deprotonate differently, randomly generated mutant cycloartenol synthases were selected in a yeast lanosterol synthase mutant. A novel His477Asn mutant was uncovered that produces 88% lanosterol and 12% parkeol. The His477Gln mutant produces 73% parkeol, 22% lanosterol, and 5% Delta(7)-lanosterol. These are the most accurate lanosterol synthase and parkeol synthase that have been generated by mutagenesis.     

Tegoprens in anaerobic digestion of a mixture of cheese whey,poultry waste,and cattle dung for improved biomethanation

To obtain enriched methane content and improve the anaerobic digestion of a mixture of cattle dung, poultry waste, and cheese whey, the effect of various doses of Tegoprens: T-3012, T-3022, T-5842, T-5843, T-5851, T-5852 has been studied, in bench-scale digesters. Among them, Tegoprens 3022 showed more than a 45% increase in gas production with higher methane content.     

Volumetric Properties of Aqueous 2-Chloroethanol Solutions and Volumes of Transfer of Some Amino Acids and Peptides from Water to Aqueous 2-Chloroethanol Solutions

Densities and apparent molar volumes of aqueous 2-chloroethanol were determined at temperatures from 15.0 to 34.4°C using digital densimetry. The results of the volumetric measurements have been used to calculate the following thermodynamic quantites at 25°C: V ₂ ^o = 55.05 ± 0.02 cm³-mol^–1, (V ₂ ^o/T)_p = 0.01486 ± 0.00318 cm³-K^–1-mol^–1, and (² V ₂ ^o/T ²)_p = 0.02972 ± 0.00318 cm³-K^–2-mol^–1. Partial molar volumes of transfer from water to 1 mol-dm^–3 2-chloroethanol have also been determined for L-glycine, L-alanine, L-serine, L-glutamic acid, and L-aspartic acid at 35.0°C. The transfer results have been explained in terms of the nature of the interactions of the groups in the solute and solvent. Hydration numbers of L-glycine and L-alanine have also been calculated in aqueous 2-chloroethanol.     

Redox reactions of transient species formed during pulse radiolysis of 2-pyridine carboxaldehyde and 2-pyridine methanol in aqueous solutions

Rate constants for the reactions of e _aq ^? , H and OH radicals with 2-pyridine carboxaldehyde and 2-pyridine methanol have been determined by pulse radiolysis technique. Reactions of reducing radicals such as acetone ketyl radicals and CO₂ ^? with these compounds were also evaluated at various pHs. The species produced by the reaction of reducing radicals with these solutes was a strong reductant itself. While pyridinyl were produced in the case of 2-pyridine methanol, one-electron reduction of 2-pyridine carboxaldehyde led to the formation of PyCHOH radical. The one-electron reduction potential of PyCHOH radicals was estimated by establishing an equilibrium with MV⁺ radical cations to be ?0.6V vs NHE. OH radical reaction with 2-pyridine carboxaldehyde gave an OH adduct, while in the case of 2-pyridine methanol, OH radicals reacted partly by H-abstraction from the ?CH₂OH group. SO₄ ^? radical reaction with 2-pyridine carboxaldehyde produced a species which was reducing in nature. The rate constants for the reaction of e _aq ^? and OH radicals are compared with similar values obtained in the case of other 2-pyridine derivatives to see if there is any electron-inductive effect.     

The stability of poly(m-carborane-siloxane) elastomers exposed to heat and gamma radiation

Poly(m-carboranyl-siloxane) elastomers containing a mixture of di-methyl- and methylphenyl-silyl units were synthesised using the ferric chloride catalysed condensation reaction between di-chloro-diorganosilane and bis(di-methylmethoxysilyl)-m-carborane. These elastomeric materials were originally developed to have greater stability to extreme thermal environments and retain tailorable physical and chemical properties relative to comparable non-carborane containing elastomers. Prepared samples were aged either by heating in air at elevated temperatures or by gamma irradiation from a ⁶⁰Co source. Multinuclear (¹H, ¹³C and ¹¹B) solid and solution state nuclear magnetic resonance (NMR) was used to assess degradation. This included measurements of segmental chain dynamics using a solid-echo pulse sequence reflecting changes in crosslink density and assessing changes to the carborane fragment by ¹¹B and ¹H Magic Angle Spinning (MAS) methods. Thermogravimetric measurements were also performed to assess thermal stability. Gamma radiation (to a dose of 1 MGy) was found to induce only a small degree of elastomer hardening as evidenced by a reduction in segmental chain dynamics. The carborane cage however, remained intact at these dose levels. Thermal degradation was observed to lead to oxidative crosslinking, the degree of which is dependent on temperature. At temperatures below 350 °C, only small changes in segmental dynamics were observed commensurate with only minor weight loss at this temperature. At temperatures above 350 °C, the degradation of the elastomer increased dramatically with decreased segmental dynamics and presumed partial oxidation of the carborane cage. The integrity of the m-carborane cage and the segmental dynamics were found to be significantly reduced at temperatures above 580 °C, in line with the known cage rearrangement temperature for icosahedral carboranes.     

A chemically consistent graph architecture for massive reaction networks applied to solid-electrolyte interphase formation

Modeling reactivity with chemical reaction networks could yield fundamental mechanistic understanding that would expedite the development of processes and technologies for energy storage, medicine, catalysis, and more. Thus far, reaction networks have been limited in size by chemically inconsistent graph representations of multi-reactant reactions (e.g. A + B → C) that cannot enforce stoichiometric constraints, precluding the use of optimized shortest-path algorithms. Here, we report a chemically consistent graph architecture that overcomes these limitations using a novel multi-reactant representation and iterative cost-solving procedure. Our approach enables the identification of all low-cost pathways to desired products in massive reaction networks containing reactions of any stoichiometry, allowing for the investigation of vastly more complex systems than previously possible. Leveraging our architecture, we construct the first ever electrochemical reaction network from first-principles thermodynamic calculations to describe the formation of the Li-ion solid electrolyte interphase (SEI), which is critical for passivation of the negative electrode. Using this network comprised of nearly 6000 species and 4.5 million reactions, we interrogate the formation of a key SEI component, lithium ethylene dicarbonate. We automatically identify previously proposed mechanisms as well as multiple novel pathways containing counter-intuitive reactions that have not, to our knowledge, been reported in the literature. We envision that our framework and data-driven methodology will facilitate efforts to engineer the composition-related properties of the SEI – or of any complex chemical process – through selective control of reactivity.

A chemically consistent graph architecture enables autonomous identification of novel solid-electrolyte interphase formation pathways from a massive reaction network.