Release characteristics of a free polyunsaturated fatty acid from an oily lymphographic agent

The release profiles of a free polyunsaturated fatty acid, alpha-linolenic acid, from solutions in an oily lymphographic agent Lipiodol-Ultra-Fluid (Lipiodol), to rabbit and human plasma, phosphate buffer solution (PBS), and PBS containing bovine serum albumin (BSA) were examined in vitro. The times required for 50% release of alpha-linolenic acid from Lipiodol were about 1 and 1.5 h in the rabbit and human plasma, respectively. Although only a slight amount of alpha-linolenic acid was released from Lipiodol to PBS after 24 h incubation at 37 degrees C, release was markedly enhanced by the addition of BSA to PBS. The amount of alpha-linolenic acid released from Lipiodol into PBS containing 5% BSA increased as the alpha-linolenic acid content in Lipiodol was increased. In all experiments, the release had stopped before all alpha-linolenic acid had been released. The prolongation of alpha-linolenic acid release from Lipiodol is considered a requisite for a selective anticancer effect of Lipiodol containing a free fatty acid on liver cancer.     

Synthesis of bis(alk-3-en-1-ynyl)benzene with either E- or Z-configuration via a one-pot three-component coupling reaction and its optical properties

A convenient, efficient and stereoselective synthesis of a range of bis(alk-3-en-1-ynyl)benzenes with E- and Z-configuration is described. The protocol involves Cu-mediated cross-coupling reaction of (E)- and (Z)-alk-1-enyldisiamylboranes with (trimethylsilyl)ethynyl bromide and Pd/Cu-catalyzed cross-coupling reaction with diiodobenzene. The sequential cross-coupling reaction proceeds readily under extremely mild conditions in a one-pot manner to afford bis(alk-3-en-1-ynyl)benzenes in good to excellent yields. The optical properties of the products are also described.     

Deoxyfluorination of alcohols using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine

Deoxyfluorination of alcohols was carried out using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine (DFMBA). Primary alcohols were effectively converted to fluorides under microwave irradiation or conventional heating. Deoxyfluorination of an anomeric hydroxy group in sugars by DFMBA proceeded at below room temperature and glycosyl fluorides could be obtained in good yields. The deoxyfluorination reaction chemoselectively proceeded and various protecting groups on the sugar can survive under the reaction conditions.     

The first example of regiospecific magnesium carbenoid 1,3-CH insertion: its mechanism and stereochemistry

Addition reaction of two geometrical isomers of 1-chlorovinyl p-tolyl sulfoxides, derived from unsymmetrical ketones and chloromethyl p-tolyl sulfoxide, with lithium enolate of tert-butyl acetate gave single isomers of the adduct, respectively. Treatment of each diastereomer with i-PrMgCl resulted in the formation of magnesium carbenoids. Highly regiospecific 1,3-CH insertion reaction was found to take place from the magnesium carbenoids to afford cyclopropanes in high yields. Stereochemistry of the adducts, reaction mechanism, and origin of the regiospecificity are discussed.     

Development of a cooled He*(23S) beam source for measurements of state-resolved collision energy dependence of Penning ionization cross sections: Evidence for a stereospecific attractive well around methyl group in CH3CN

A low-temperature discharge nozzle source with a liquid-N(2) circulator for He*(2(3)S) metastable atoms has been developed in order to obtain the state-resolved collision energy dependence of Penning ionization cross sections in a low collision energy range from 20 to 80 meV. By controlling the discharge condition, we have made it possible to measure the collision energy dependence of partial ionization cross sections (CEDPICS) for a well-studied system of CH(3)CN+He*(2(3)S) in a wide energy range from 20 to 350 meV. The anisotropic interaction potential energy surface for the present system was obtained starting from an ab initio model potential via an optimization procedure based on classical trajectory calculations for the observed CEDPICS. A dominant attractive well depth was found to be 423 meV (ca. 10 kcal/mol) at a distance of 3.20 A from the center of mass of CH(3)CN in the N-atom side along the CCN axis. In addition, a weak attractive well (ca. 0.9 kcal/mol) surrounding the methyl group (-CH(3)) has been found and ascribed to the interaction between an unoccupied molecular orbital of CH(3)CN and 2s atomic orbital of He*(2(3)S).     

Photocrosslinking of poly(2,3-epithiopropyl methacrylate) by the oxidation of pendant episulfide groups

In the photocrosslinking of poly(2,3-epithiopropyl methacrylate) (PETMA) films the effect of the pendant episulfide group's oxidation on the crosslinking of PETMA was investigated. Thermal crosslinking of PETMA is promoted by peroxides such as benzoyl peroxide and hydrogen peroxide. IR spectrum of the crosslinked PETMA showed that the reaction proceeded through the oxidation of episulfide groups by the peroxides. The anthracene (An) sensitized photocrosslinking of PETMA films also proceeded via the oxidation of episulfide groups by singlet oxygen. It was found that residual tetrahydrofuran (THF) in the films remarkably increased the rate of the photocrosslinking and/or reduced the induction period. From the further investigation concerning casting solvents it was found that residual CS₂, CCl₄, and CHCl₃ in films increased the rate of the photocrosslinking and/or reduced the induction period of the photocrosslinking. The disappearance rate of An in the films was also increased by the presence of residual CS₂, CCl₄, and CHCl₃, differring from the result of THF. These results were explained by a difference in lifetime of singlet oxygen in the films. From the results were explained by a difference in lifetime of singlet oxygen in the films. From the results concerning the effects of hydroperoxides such as THF hydroperoxide and t-butyl hydroperoxide on the photocrosslinking of PETMA films the acceleration effect of the residual THF was deduced to be due to the promotion of singlet oxygen-oxidation of sulfide groups by protic compounds such as THF hydroperoxide and H₂O in the THF.     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Intermediate state during the crystal transition in aspartame, studied with thermal analysis, solid-state NMR, and molecular dynamics simulation

Aspartame (L-alpha-aspartyl-L-phenylalanine methyl ester) is a dipeptide sweetener about 200 times as sweet as sugar. It exists in crystal forms such as IA, IB, IIA, and IIB, which differ in crystal structure and in the degree of hydration. Among these, IIA is the most stable crystal form, and its crystal structure has been well determined (Hatada et al., J. Am. Chem. Soc., 107, 4279-4282 (1985)). To elucidate the structural factors of thermal stability in the IIA form of aspartame and to examine the physical process in the crystal transformation between the IIA and IIB forms, we performed a thermal analysis and solid-state NMR measurements. We found that a quasi-stable intermediate state exists in the transformation, and it has the same crystal lattice as the usual IIA form, despite the dehydration from 1/2 mol to 1/3 mol per 1 mol of aspartame. The results of the energy component analysis and the molecular dynamics simulation suggest that the entropic effect promotes the generation of the intermediate state, which is presumably caused by the evaporation of the water of crystallization and the increase of molecular motion in aspartame. Thus, the thermal stability of the IIA form is attributable to a structural property, i.e., the crystal lattice itself is retained during the above dehydration. Moreover, the molecular dynamics simulations suggest that the aspartame molecules have two kinds of conformational flexibility in the intermediate state.     

A distance-controlled oligopeptide linker as a novel photo-induced energy transfer switch by secondary structural transition

By using an oligopeptide chain as a functional linker and introducing coumarin 2 and coumarin 343 at the chain ends, an effective photo-induced energy transfer system was constructed and energy transfer from coumarin 2 to coumarin 343 was switched on and off by a solvent-induced helix-coil secondary transition of the oligopeptide chain.