New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Random multiblock poly(ester amide)s containing poly(L‐lactide) and cycloaliphatic amide segments: Synthesis and biodegradation studies

Novel multiblock poly(ester amide)s containing poly(L ‐lactide) and cycloaliphatic amide segments were synthesized from telechelic oligomer of α,ω‐hydroxyl terminated poly(L ‐lactide), 1,3‐cyclohexylbis(methylamine), and sebacoylchloride by the “two‐step” interfacial polycondensation method. The blocky nature of PEAs was established by FTIR and ¹H NMR spectroscopies. The effect of relative content of ester and amide segments on the crystallization nature of PEAs was investigated by WAXD and DSC analyses. PEAs having lower content of PLLA, PEA 1 and PEA 2, showed a crystallization pattern analogous to polyamides, whereas PEA 3, having higher content of PLLA, showed two crystalline phases characterized by polyester and polyamide segments. Random nature of PEAs was observed from single T_g values. Biodegradation studies using the enzyme lipase from Candida Cylindracea showed higher degradation rate for PEA 3 than that for PEA 1 and PEA 2. FTIR, ¹H NMR, and DSC analyses of the degraded products indicated the involvement of ester linkages in the degradation process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3250–3260, 2006     

Resolution of the non-steady-state kinetics of the two-step mechanism for the Diels-Alder reaction between anthracene and tetracyanoethylene in acetonitrile

The Diels-Alder reaction between anthracene and tetracyanoethylene in acetonitrile does not reach a steady-state during the first half-life. The reaction follows the reversible consecutive second-order mechanism accompanied by the formation of a kinetically significant intermediate. The experimental observations consistent with this mechanism include extent of reaction-time profiles which deviate markedly from those expected for the irreversible second-order mechanism and initial pseudo first-order rate constants which differ significantly from those measured at longer times. It is concluded that the reaction intermediate giving rise to these deviations cannot be the charge-transfer (CT) complex, which is formed during the time of mixing, but rather a more intimate complex with a geometry favorable to the formation of the Diels-Alder adduct. The kinetics of the reaction were resolved into the microscopic rate constants for the individual steps. The rate constants, as shown in equation 1, at 293 K were observed to be 5.46 M(-)(1) s(-)(1) (k(f)), 14.8 s(-)(1) (k(b)), and 12.4 s(-)(1) (k(p)). Concentration profiles calculated under all conditions show that intermediate concentrations increase to maximum values early in the reaction and then continually decay during the first half-life. It is concluded that the charge-transfer complex may be an intermediate preceding the formation of the reactant complex, but due to its rapid formation and dissociation it is not detected by the kinetic measurements.     

A Sensitive HPTLC Method for Estimation of Amentoflavone,a Bioactive Principle from Biophytum sensitivum (Linn.) DC. and Putranjiva roxburghii Wall.

JPC – Journal of Planar Chromatography – Modern TLC - A sensitive high-performance thin-layer chromatographic (HPTLC) method has been developed for estimation of amentoflavone, an...     

Preparation and Pharmacokinetic Evaluation of Iodine-125 Labeled Alphamethyl-L-Tyrosine

A prompt gamma-ray neutron activation analysis (PGNAA) system was used to calibrate and validate a Monte Carlo model as a proof of principle for the quantification of chlorine in soil. First, the response of an n-type HPGe detector to point sources of ⁶⁰Co and ¹⁵²Eu was determined experimentally and used to calibrate an MCNP4a model of the detector. The refined MCNP4a detector model can predict the absolute peak detection efficiency within 12% in the energy range of 120–1400 keV. Second, a PGNAA system consisting of a light-water moderated ²⁵²Cf (1.06 g) neutron source, and the shielded and collimated HPGe detector was used to collect prompt gamma-ray spectra from Savannah River Site (SRS) soil spiked with chlorine. The spectra were used to calculate the minimum detectable concentration (MDC) of chlorine and the prompt gamma-ray detection probability. Using the ²⁵²Cf based PGNAA system, the MDC for Cl in the SRS soil is 4400 g/g for an 1800-second irradiation based on the analysis of the 6110 keV prompt gamma-ray. MCNP4a was used to predict the PGNAA detection probability, which was accomplished by modeling the neutron and gamma-ray transport components separately. In the energy range of 788 to 6110 keV, the MCNP4a predictions of the prompt gamma-ray detection probability were generally within 60% of the experimental value, thus validating the Monte Carlo model.     

A Sensitive Spectrophotometric Determination of Nitrite in Water and Soil

A highly sensitive spectrophotometric method for the determination of nitrite in water and soil has been developed. The reaction of nitrite with acidified potassium iodide to liberate iodine which oxidizes leuco‐crystal violet (LCV) to form crystal violet having absorption maxima at 590 nm forms the bases of this method. In aqueous medium the system obeys Beer's law in the range of 0.1 to 1.0 μg per 25 mL (0.004–0.04 ppm), while in an extractive system the range is 0.025–0.25 μg in 100 mL (0.00025–0.0025 ppm). The molar absorptivity and Sandell's sensitivity were found to be 1.54 × 10⁶ 1 mol^?1 cm^?1 and 44 pg cm^?2, respectively.     

Scanning electron microscopic studies on different habits of gel grown doped manganese carbonate crystals

The effect of impurities on the growth of manganese carbonate crystals has been studied. Stereophotogrammetric analysis showed that all crystal faces have the same Miller indices and the peanut-shaped forms are twins with twin axis 0001.     

Indentation studies on 〈1 0 0〉, 〈0 0 1〉 and 〈1 0 1〉 face of ammonium dihydrogen phosphate (ADP) single crystals: A novel nonlinear optical material

In the present work, Vickers microhardness measurements were carried out on different faces i.e. (1 0 0), (0 0 1) and (1 0 1) of ammonium dihydrogen phosphate (ADP) single crystals grown by slow evaporation solution technique at room temperature in the load ranging from 0.2 to 2 N. The obtained results show that the load independent hardness values are 0.8, 0.7 and 0.66 GPa, respectively at different faces of ADP crystal. From the crack length measurements, the fracture toughness values (K_c) was estimated using Evans and Anstis model and the present studies suggest that Evans model is more relevant when compared to Anstis model. The load variation of some mechanical properties viz. brittle index number (B_i) and yield strength (σ_y) for ADP have also been calculated for the first time.     

Effect of ZnO doping on the structural and optical properties of BaWO<Subscript>4</Subscript> thin films prepared using pulsed laser ablation technique

BaWO₄ doped with ZnO (2, 3, 5, 7 and 10 wt%) nanostructured films are prepared on quartz substrates by pulsed laser ablation. The films are post annealed at 900°C. GIXRD analysis of the post-annealed films reveal the change of orientation of scheelite tetragonal crystal growth from 1 1 2 reflection plane to 0 0 4 planes when doping concentration is more than 3 wt%. The AFM images show that film with 7 wt% ZnO doping concentration has good ceramic pattern with surface features giving a minimum value of rms surface roughness suitable for optoelectronic device applications. The optical transmittance and band-gap energy of the films are found to decrease considerably on postannealing which can be due to the increase in grain size of the crystallites on annealing. Thus doping with ZnO improves the surface features of the films and increases the optical band-gap energy.