Water-Soluble imide-amide copolymers. II. Preparation and characterization of poly (acrylamide-co-p-maleimidobenzoic acid)

The comonomer required, p-maleimidobenzoic acid (MBA) was first prepared in good yield by refinements of published methods. p-Carboxysuccinanilic acid (CSA), and p-succinimidobenzoic acid (SBA), were also prepared to provide models useful for IR and NMR for spectroscopic assignments of the new copolymers. Polymerization of MBA with acrylamide in glacial acetic acid at 60°C gave copolymers with estimated viscosity average molecular weights of 60,000 to 90,000. Yields and viscosity average molecular weights decreased as the MBA to acrylamide monomer feed ratio was increased. The rate of incorporation of MBA into the copolymer rose from 7 to 23% when the mole ratio in the feed was raised from 5 to 20%. Decreasing the initiator concentration increased molecular weights by less than predicted and reduced the yield of copolymer for any given feed ratio of MBA to acrylamide. In all cases about 30–40% of the MBA units in the purified copolymers were hydrolyzed. A change to dimethyl sulfoxide solvent gave good, and poor yields of copolymer at 5 and 10 mol % MBA, respectively, and no copolymer at 20 mol % MBA. Viscosity average molecular weights of the copolymer products prepared in DMSO were somewhat lower than obtained for the copolymers prepared in acetic acid. Polymerization in a DMSO-water mixture gave a negligible yield of polymeric product. Instead, only hydrolysates of MBA precipitated when the coloured polymerization solutions were added to methanol.     

In situ observations of water production and distribution in an operating H2/O2 PEM fuel cell assembly using 1H NMR microscopy

Proton NMR imaging was used to investigate in situ the distribution of water in a polymer electrolyte membrane fuel cell operating on H2 and O2. In a single experiment, water was monitored in the gas flow channels, the membrane electrode assembly, and in the membrane surrounding the catalysts. Radial gradient diffusion removes water from the catalysts into the surrounding membrane. This research demonstrates the strength of 1H NMR microscopy as an aid for designing fuel cells to optimize water management.     

A practical synthesis of kifunensine analogues as inhibitors of endoplasmic reticulum alpha-mannosidase I

[reaction: see text] A practical synthesis of the potent class I alpha-mannosidase inhibitor kifunensine (1) beginning from the inexpensive and readily available starting material L-ascorbic acid (15) is described. The protected amino-alcohol ((2R,3R,4R,5R)-5-amino-2,3:4,6-diisopropylidenedioxyhexanol, 11) served as a key intermediate from which several N-1 substituted kifunensine analogues (including N-methyl, N-cyclohexyl, and N-bis(hydroxymethyl)methyl) and 2-desoxakifunensine analogues (including N-H and N-methyl) were prepared and screened for inhibition of human endoplasmic reticulum alpha-mannosidase I (ER Man I) and mouse Golgi alpha-mannosidase IA (Golgi Man IA). In addition, several pseudodisaccharide kifunensine analogues in which a mannose residue was tethered to N-1 of kifunensine via a two-, three-, or four-carbon linker and an affinity-bound kifunensine analogue were also prepared and evaluated for biological activity. While the synthesized N-1 kifunesine analogues were found to be less potent inhibitors of Class I alpha-mannosidases than kifuensine itself, the bis(hydroxymethyl)methylkifunensine analogue 6 was shown to selectively inhibit ER Man I over Golgi Man IA.     

The use of 1H NMR microscopy to study proton-exchange membrane fuel cells.

To understand proton-exchange membrane fuel cells (PEMFCs) better, researchers have used several techniques to visualize their internal operation. This Concept outlines the advantages of using 1H NMR microscopy, that is, magnetic resonance imaging, to monitor the distribution of water in a working PEMFC. We describe what a PEMFC is, how it operates, and why monitoring water distribution in a fuel cell is important. We will focus on our experience in constructing PEMFCs, and demonstrate how 1H NMR microscopy is used to observe the water distribution throughout an operating hydrogen PEMFC. Research in this area is briefly reviewed, followed by some comments regarding challenges and anticipated future developments.     

Application of high-field NMR and cryogenic probe technologies in the structural elucidation of poecillastrin a,a new antitumor macrolide lactam from the sponge poecillastra species

Poecillastrin A (1), a new polyketide-derived macrolide lactam, was isolated from a deep-water collection of the marine sponge Poecillastra species. The structure of poecillastrin A (1) was assigned using NMR data acquired at 500 MHz with an inverse-detection cryogenic probe and at 800 MHz with a room-temperature probe.     

Morphology and oxygen sensor response of luminescent Ir-labeled poly(dimethylsiloxane)/polystyrene polymer blend films

Polymer films consisting of a linear poly(dimethylsiloxane) end-functionalized with a luminescent Ir(III) complex (Ir-PDMS), blended with polystyrene (PS), function as optical oxygen sensors. The sensor response arises by quenching of the luminescence from the Ir(III) chromophore by oxygen that permeates into the polymer film. The morphology and luminescence oxygen sensor properties of blend films consisting of Ir-PDMS and PS have been characterized by fluorescence microscopy, atomic force microscopy, and scanning electron microscopy. The investigations demonstrate that microscale phase segregation occurs in the films. In blends that contain a relatively small amount of Ir-PDMS in PS (ca. 10 wt %), the Ir-PDMS exists as circular domains, with diameters ranging from 2 to 5 mum, surrounded by the majority PS phase. For larger weight fractions of Ir-PDMS in the blends, the film morphology becomes bicontinuous. A novel epifluorescence microscopy method is applied that allows the construction of Stern-Volmer quenching images that quantify the oxygen sensor response of the blend films with micrometer spatial resolution. These images provide a map of the oxygen permeability of the polymer blend films with a spatial resolution of ca. 1 mum. The results of this investigation show that the micrometer-sized Ir-PMDS domains display a 2-3-fold higher oxygen sensor response compared to the surrounding PS matrix. This result is consistent with the fact that PDMS is considerably more gas permeable compared to PS. The relationship of the microscale morphology of the blends to their performance as macroscale optical oxygen sensors is discussed.     

Anti-HIV cyclotides

The cyclotides are a recently discovered, structurally unique family of bioactive plant peptides. Their discovery spawned a series of structural analyses, synthetic efforts, and studies to define the biosynthesis and biological properties of these novel peptide metabolites. Cyclotides have a head-to-tail cyclized amino acid backbone and a conserved cystine knot motif that provides an extremely stable structural framework. They all share a common global fold and are highly resistant to denaturation and to cleavage by proteolytic enzymes. However, these macrocyclic peptides are quite permissive to amino acid substitutions or additions in several peripheral loop regions, since changes in these loops do not alter the core cyclotide structure. These features make cyclotides attractive templates for incorporating desired amino acid sequences and then delivering these peptide sequences in a well defined, highly stable framework. Cyclotides likely function in a defensive role in the source plants since they exhibit a broad spectrum of antimicrobial activity and are detrimental to the growth and survival of herbivorous insects. Cyclotides are gene-encoded polypeptides that are cleaved from larger precursor proteins and then cyclized. This review summarizes research done on a subset of cyclotides that were discovered due to their HIV inhibitory properties. It details the isolation and characterization of these compounds and describes this work in the context of our current state of knowledge of the entire cyclotide family.     

Photochemistry and photophysics of Cr(III) macrocyclic complexes

The phosphorescence and photochemical behavior of the macrocyclic complexes (1,4,7,10,13,16-hexaazacyclooctadecane)chromium(III) (Cr([18]-aneN(6))(3+); 1) and (4,4',4'-ethylidynetris(3-azabutan-1-amine)) chromium(III) (Cr(sen)(3+); 2) have been compared to each other and to the complex Cr(en)(3)(3+). For both macrocyclic complexes, phosphorescence from room temperature aqueous solutions is too weak to be observed, contrasting with Cr(en)(3)(3+), though both had somewhat longer 77 K lifetimes than Cr(en)(3)(3+). Phosphorescence lifetimes for these macrocyclics decreased with increasing temperature much faster than for Cr(en)(3)(3+) and a conventional extrapolation based on a fit of reciprocal lifetimes (corrected for the low-temperature contribution) to the Arrhenius equation gave estimated room temperature phosphorescence lifetimes of a few nanoseconds, consistent with the failure to observe room temperature emission. Fitting of the nonlinearity of the data seen in these plots suggested that two high-temperature processes were occurring with estimated activation parameters (E in kJ mol(-1) and A in s(-1)) for Cr([18]-aneN(6))(3+): E(1) = 40, A(1) = 1 x 10(16); E(2) = 24, A(2) = 1 x 10(14): Cr(sen)(3+); E(1) = 45, A(1) = 2 x 10(15); E(2) = 29, A(2) = 7 x 10(11). Cr([18]-aneN(6))(3+) was photochemically inert on irradiation. On irradiation into the lowest quartet ligand field absorption band, Cr(sen)(3+) photolyzes with a quantum yield of 0.098 +/- 0.001 at room temperature. Laser flash photolysis with conductivity detection showed that this photoreaction occurred faster than protonation of the liberated amine ligand at all practical proton concentrations. The quantum yield for irradiation directly into the doublet absorption band of Cr(sen)(3+) was 0.077 +/- 0.003. Photoaquation of Delta-Cr(sen)(3+) led to loss of optical activity and product analysis by capillary electrophoresis showed that both racemic and Delta-Cr(sen)(3+) photoaquate to a single main product, trans-Cr(sen-NH)(H(2)O)(4+). The product stereochemistry is shown to be consistent with predictions based on the angular overlap model for Cr(III) photochemistry, recognizing the additional constraints imposed by the ligand. The abnormally short room temperature solution lifetime of the doublet state is a result of a radiation-less process that competes with other processes depleting the doublet state. However, this doublet-state deactivation process does not lead to photoaquation but competes with BISC and photoaquation via the quartet state, resulting in an unprecedented reduction in photoaquation quantum yield on direct irradiation into the doublet state.