Plane wave source with minimal harmonic distortion for investigating nonlinear acoustic properties

The objective of this investigation is to introduce and validate a practical ultrasound source to be used in the investigation of the nonlinear material properties of liquids and soft tissues studied in vitro. Methods based on the progressive distortion of finite amplitude ultrasonic waves in the low megahertz frequency range are most easily implemented under the assumption of plane wave propagation. However, achieving an approximately planar ultrasonic field over substantial propagation distances can be challenging. Furthermore, undesired harmonic distortion of the ultrasonic field prior to insonification of the specified region of interest represents another serious limitation. This paper introduces an approach based on the use of the ultrasonic field emanating from a stainless-steel delay line. Both simulation and direct experimental measurement demonstrate that such a field exhibits relatively planar wave fronts to a good approximation (such that a 3-mm-diam receiver would be exposed to no more than 3 dB of loss across its face) and is free from the significant harmonic distortion that would occur in a conventional water path.     

Passive combination of multiple beams in an optical fiber via stimulated Brillouin scattering

We demonstrate passive combination of multiple beams in an optical fiber via stimulated Brillouin scattering (SBS). Four off-axis beams are combined in a long multimode optical fiber using a novel all-optical mount. The combined beam has the high spatial coherence properties of the LP(01) mode owing to the beam cleanup properties of SBS. The threshold for SBS when off-axis pumps are used is shown to be a factor of 13 times higher than for on-axis pump beams. We propose this method would improve the brightness of an array of fiber amplifiers.     

Effective transformation of cellulose to 5-hydroxymethylfurfural catalyzed by fluorine anion-containing ionic liquid modified biochar sulfonic acids in water

This article first discloses that the fluorine anion-containing ionic liquids-functionalized biochar sulfonic acids (BCSA-IL-F_1–3s), which were simply synthesized by an ionic exchange of 1-trimethoxysilylpropyl-3-methylimidazolium chloride (IL-Cl) grafted on the BCSA with CF₃SO₃H (HF₁), HBF₄ (HF₂), HPF₆ (HF₃), respectively, can efficiently catalyze cellulose hydrolysis into reducing sugars (RSs) and 5-hydroxymethyl furfural (HMF) in water under microwave irradiation. This process provides a very high catalysis efficiency (turnover numbers, 4.03–4.89) at mild temperature (80 °C) for 3 h, but also possesses an excellent repeatability. More outstandingly, they can achieve much higher HMF yields (12.70–27.94%) compared to the IL-Cl-functionalized BCSA catalyst (HMF yields are lower than 0.1%) under the same reaction conditions. This is likely because the introduction of IL-F_1–3s groups can significantly improve the accessibility, acidity and thermal stability of BCSA’s SO₃H sites, as supported by evidence from a solid ³¹P NMR spectrum and thermogravimetric analysis. It is proposed that the good selectivity for HMF perhaps originates from a co-catalysis action of the IL-F_1–3s and SO₃H groups on BCSA-IL-F_1–3s in the further conversion of RSs to HMF.     

Synthesis, self-assembly, and photophysical properties of cationic oligo(p-phenyleneethynylene)s

Three series of cationic oligo p-phenyleneethynylenes (OPEs) have been synthesized to study their structure-property relationships and gain insights into the transition from molecular to macromolecular properties. The absorbance maxima and molar extinction coefficients in all three sets increase with increasing number of repeat units; however, the increase in λ(max) between the oligomers having 2 and 3 repeat units is very small, and the oligomer having 3 repeat units shows virtually the same spectra as a p-phenyleneethynylene polymer having 49 repeat units. A computational study of the oligomers using density functional theory calculations indicates that while the simplest oligomers (OPE-1) are fully conjugated, the larger oligomers are nonplanar and the limiting "segment chromophore" may be confined to a near-planar segment extending over three or four phenyl rings. Several of the OPEs self-assemble on anionic "scaffolds", with pronounced changes in absorption and fluorescence. Both experimental and computational results suggest that the planarization of discrete conjugated segments along the phenylene-ethynylene backbone is predominantly responsible for the photophysical characteristics of the assemblies formed from the larger oligomers. The striking differences in fluorescence between methanol and water are attributed to reversible nucleophilic attack of structured interfacial water on the excited singlet state.     

Energy transfer between conjugated polyelectrolytes in layer-by-layer assembled films

We present a study of Fo?rster resonance energy transfer (FRET) between two emissive conjugated polyelectrolytes (CPEs) in layer-by-layer (LbL) self-assembled films as a means of examining their organization and architecture. The two CPEs are a carboxylic acid functionalized polyfluorene (PFl-CO(2)) and thienylene linked poly(phenylene ethynylene) (PPE-Th-CO(2)). The PFl-CO(2) presents a maximum emission at 418 nm, while the PPE-Th-CO(2) has an absorption λ(max) centered at 431 nm, in sufficient proximity for effective FRET. Several LbL films have been constructed using varied concentrations of the deposition solutions and identity of the buffer layers separating the two emissive layers, using a system of either weak polyelectrolytes, poly(allylamine hydrochloride) (PAH)/poly(sodium methacrylate) (PMA), or strong polyelectrolytes, poly(diallylammonium chloride) (PDDA)/poly(styrene sulfonate) sodium (PSS). The efficiency of FRET has been monitored using fluorescence spectroscopy. Initially, the fluorescence of the PFl-CO(2) (E(g) ～ 3.0 eV), which emits at 420 nm, is quenched by the lower band gap PPE-Th-CO(2) (E(g) ～ 2.5 eV). For films using the PAH/PMA system as buffer bilayers and deposited from 1 mM solutions, the PFl-CO(2) fluorescence is progressively recovered as the number of intervening buffer bilayers is increased. Ellipsometry measurements indicate that energy transfer between the two emissive layers is efficient to a distance of ca. 7 nm.     

Antibacterial activity of conjugated polyelectrolytes with variable chain lengths

Cationic poly(phenylene ethynylene)- (PPE-) based conjugated polyelectrolytes (CPEs) with six different chain lengths ranging in degree of polymerization from ～7 to ～49 were synthesized from organic-soluble precursor polymers. The molecular weight of the precursor polymers was controlled by the amount of a monofunctional "end-capping" agent added to the polymerization reaction. Cationic CPEs were prepared by quaternization of amine groups to tetraalkylammonium groups. Their structure-property relationships were investigated by observing their photophysical properties and antibacterial activity. The polymers were found to exhibit a chain-length dependence in their photophysical properties. It has also been observed that the polymers exhibit effective antibacterial activity against both Gram-positive and Gram-negative bacteria under UV irradiation, whereas they show little antibacterial activity in the dark. An effect of chain length on the light-activated antibacterial activity was also found: The shortest polymer (n=7) exhibited the most effective antibacterial activity against both Gram-positive and Gram-negative bacteria.     

Spectroscopic and electronic structure studies of a dimethyl sulfoxide reductase catalytic intermediate: implications for electron- and atom-transfer reactivity

The electronic structure of a genuine paramagnetic des-oxo Mo(V) catalytic intermediate in the reaction of dimethyl sulfoxide reductase (DMSOR) with (CH(3))(3)NO has been probed by electron paramagnetic resonance (EPR), electronic absorption, and magnetic circular dichroism (MCD) spectroscopies. EPR spectroscopy reveals rhombic g- and A-tensors that indicate a low-symmetry geometry for this intermediate and a singly occupied molecular orbital that is dominantly metal centered. The excited-state spectroscopic data were interpreted in the context of electronic structure calculations, and this has resulted in a full assignment of the observed MCD and electronic absorption bands, a detailed understanding of the metal-ligand bonding scheme, and an evaluation of the Mo(V) coordination geometry and Mo(V)-S(dithiolene) covalency as it pertains to the stability of the intermediate and electron-transfer regeneration. Finally, the relationship between des-oxo Mo(V) and des-oxo Mo(IV) geometric and electronic structures is discussed relative to the reaction coordinate in members of the DMSOR enzyme family.     

Low-bandgap donor-acceptor conjugated polymer sensitizers for dye-sensitized solar cells

A set of two donor-acceptor type conjugated polymers with carboxylic acid side groups have been synthesized and utilized as active materials for dye-sensitized solar cells (DSSCs). The polymers feature a π-conjugated backbone consisting of an electron-poor 2,1,3-benzothiadiazole (BTD, acceptor) unit, alternating with either a thiophene-fluorene-thiophene triad (2a) or a terthiophene (3a) segment as the donor. The donor-acceptor polymers absorb broadly throughout the visible region, with terthiophene-BTD polymer 3a exhibiting an absorption onset at approximately 625 nm corresponding to a ～1.9 eV bandgap. The polymers adsorb onto the surface of nanostructured TiO(2) due to interaction of the polar carboxylic acid units with the metal oxide surface. The resulting films absorb visible light strongly, and their spectra approximately mirror the polymers' solution absorption. Interestingly, a series of samples of 3a with different molecular weight (M(n)) adsorb to TiO(2) to an extent that varies inversely with M(n). DSSCs that utilize the donor-acceptor polymers as sensitizers were tested using an I(-)/I(3)(-) electrolyte. Importantly, for the set of polymer sensitizers 3a with varying M(n), the DSSC efficiency varies inversely with M(n), a result that reflects the difference in adsorption efficiency observed in the film absorption experiments. The best DSSC cell tested is based on a sample of 3a with M(n) ～ 4000, and it exhibits a ～65% peak IPCE with J(sc) ～12.6 mA cm(-2) under AM1.5 illumination and an overall power conversion efficiency of ～3%.     

Accurate ab initio ro-vibronic spectroscopy of the X̃2Π CCN radical using explicitly correlated methods

Explicitly correlated CCSD(T)-F12b calculations have been carried out with systematic sequences of correlation consistent basis sets to determine accurate near-equilibrium potential energy surfaces for the X(2)Π and a(4)Σ(-) electronic states of the CCN radical. After including contributions due to core correlation, scalar relativity, and higher order electron correlation effects, the latter utilizing large-scale multireference configuration interaction calculations, the resulting surfaces were employed in variational calculations of the ro-vibronic spectra. These calculations also included the use of accurate spin-orbit and dipole moment matrix elements. The resulting ro-vibronic transition energies, including the Renner-Teller sub-bands involving the bending mode, agree with the available experimental data to within 3 cm(-1) in all cases. Full sets of spectroscopic constants are reported using the usual second-order perturbation theory expressions. Integrated absorption intensities are given for a number of selected vibronic band origins. A computational procedure similar to that used in the determination of the potential energy functions was also utilized to predict the formation enthalpy of CCN, ΔH(f)(0K) = 161.7 ± 0.5 kcal/mol.