Flip rearrangement in the water pentamer: Analysis of electronic structure

Tunneling pathways of the flip rearrangement between permutation-inversion isomers corresponding to the energetically degenerate global energy minima of (H₂O)₅ are analyzed in terms of the electronic structure. We demonstrate that charge density-based scalar measures quantify the responses of the bonding to the flip rearrangement and we discovered a high degree of continuity of the values that depend on the presence of the sliding motion of the bond critical point relative to the oxygen atom. The scalar measures can distinguish the pairs of permutation-inversion isomers everywhere except at the transition state due to the asymmetrical energy barrier; however, they cannot determine the most and least facile directions of the flip rearrangement. The vector or directional character of the two sides of the pathway is captured by the stress tensor trajectories constructed in a non-Cartesian space, defined by the variation of the position of the bond critical point. The stress tensor trajectories are presented in terms that enable bond-flexing, bond-twist, and bond-anharmonicity of the flip rearrangement between permutation-inversion isomers to be quantified. The stress tensor trajectories can distinguish the isomers at the transition state and demonstrate that the clockwise and counter-clockwise directions of the flip rearrangement are the most and least facile respectively.     

Monitoring tissue inflammation and responses to drug treatments in early stages of mice bone fracture using 50 MHz ultrasound

Bone fracture induces moderate inflammatory responses that are regulated by cyclooxygenase-2 (COX-2) or 5-lipoxygenase (5-LO) for initiating tissue repair and bone formation. Only a handful of non-invasive techniques focus on monitoring acute inflammation of injured bone currently exists. In the current study, we monitored in vivo inflammation levels during the initial 2 weeks of the inflammatory stage after mouse bone fracture utilizing 50 MHz ultrasound. The acquired ultrasonic images were correlated well with histological examinations. After the bone fracture in the tibia, dynamic changes in the soft tissue at the medial-posterior compartment near the fracture site were monitored by ultrasound on the days of 0, 2, 4, 7, and 14. The corresponding echogenicity increased on the 2nd, 4th, and 7th day, and subsequently declined to basal levels after the 14th day. An increase of cell death was identified by the positive staining of deoxynucleotidyl transferase dUTP nick end-labeling (TUNEL) assay and was consistent with ultrasound measurements. The increases of both COX-2 and Leukotriene B4 receptor 1 (BLT₁, 5-LO-relative receptor), which are regulators for tissue inflammation, in the immunohistochemistry staining revealed their involvement in bone fracture injury. Monitoring the inflammatory response to various non-steroidal anti-inflammatory drugs (NSAIDs) treatments was investigated by treating injured mice with a daily oral intake of aspirin (Asp), indomethacin (IND), and a selective COX-2 inhibitor (SC-236). The Asp treatment significantly reduced fracture-increased echogenicity (hyperechogenicity, p < 0.05) in ultrasound images as well as inhibited cell death, and expression of COX-2 and BLT₁. In contrast, treatment with IND or SC-236 did not reduce the hyperechogenicity, as confirmed by cell death (TUNEL) and expression levels of COX-2 or BLT₁. Taken together, the current study reports the feasibility of a non-invasive ultrasound method capable of monitoring post-fracture tissue inflammation that positively correlates with histological findings. Results of this study also suggest that this approach may be further applied to elucidate the underlying mechanisms of inflammatory processes and to develop therapeutic strategies for facilitating fracture healing.     

Ultrathin side-viewing needle probe for optical coherence tomography

We present the smallest reported side-viewing needle probe for optical coherence tomography (OCT). Design, fabrication, optical characterization, and initial application of a 30-gauge (outer diameter 0.31 mm) needle probe are demonstrated. Extreme miniaturization is achieved by using a simple all-fiber probe design incorporating an angle-polished and reflection-coated fiber-tip beam deflector. When inserted into biological tissue, aqueous interstitial fluids reduce the probe's inherent astigmatism ratio to 1.8, resulting in a working distance of 300 μm and a depth-of-field of 550 μm with beam diameters below 30 μm. The needle probe was interfaced with an 840 nm spectral-domain OCT system and the measured sensitivity was shown to be only 7 dB lower than that of a comparable galvo-scanning sample arm configuration. 3D OCT images of lamb lungs were acquired over a depth range of ~600 μm, showing individual alveoli and bronchioles.     

Interfacial morphology and photoelectrochemistry of conjugated polyelectrolytes adsorbed on single crystal TiO2

The nanoscale morphology and photoactivity of conjugated polyelectrolytes (CPEs) deposited from different solvents onto single crystal TiO(2) were investigated with atomic force microscopy (AFM) and photocurrent spectroscopy. CPE surface coverages on TiO(2) could be incremenentally increased by adsorbing the CPEs from static solutions. The solvents used for polymer adsorption influenced the surface morpohology of the CPEs on the TiO(2) surface. Photocurrent spectroscopy measurements in aqueous electrolytes, using iodide as a hole scavenger, revealed that the magnitude of the sensitized photocurrents was related to the surface coverages and the degree of aggregation of the CPEs as determined by AFM imaging. Absorbed photon-to-current efficiencies approaching 50% were measured for CPE layers as thick as 4 nm on TiO(2). These results suggest that precise control of CPE morphology at the TiO(2) interface can be achieved through optimization of the deposition conditions to improve the power conversion efficiencies of polymer-sensitized solar cells.     

Improving the analytical performance of ion mobility spectrometer using a non-radioactive electron source

For the ionization of gas mixtures, several ionization sources can be coupled to an ion mobility spectrometer. Radioactive sources, e.g. beta radiators like ⁶³Ni and ³H, are the most commonly used ionization sources. However, due to legal restrictions radioactive ionization sources are not applicable in certain applications. Non-radioactive alternatives are corona discharge ionization sources or photoionization sources. However, using an electron gun allows regulation of ion production rate, ionization time and recombination time by simply changing the operating parameters, which can be utilized to enhance the analytical performance of ion mobility spectrometers. In this work, the impact of an ionization source parameter variation on the ion mobility spectrum is demonstrated. Increasing the ion production rate, the amount of the generated ions increases leading to higher signal intensity while the noise remains constant. Thus, the signal to noise ratio can be increased, leading to better limits of detection. In a next step, the ion production rate is kept constant while the influence of ionization time on the ion mobility spectrum is investigated. It is shown, that varying the ionization time allows the determination of the reaction rate constants as additional information to the ion mobility. Furthermore, we show the prevention of discrimination processes by using short ionization times combined with an increased ion production rate. Thus, the limit of detection for benzene in presence of toluene is improved. Additionally, it is shown that using ion-ion recombination leads to the detection of the ion species with the highest proton affinity at higher recombination times while the low proton affine ions already recombined. Thus, the measurement of the ion mobility spectra at a defined recombination time allows a suppression of disturbing low proton affine substances.     

Determination of phosphorus in coke by the oxygen-flask method

Recent developments in the oxygen-flask technique for determination of phosphorus in coke are described. The existing method was modified by use of the recently proposed potassium antimonyl tartrate catalyst for the ascorbic acid reduction of phosphomolybdate.     

1-3 connectivity lithium niobate composites for high temperature operation

Lithium niobate, LiNbO₃, is a piezoelectric material well known for its high Curie temperature. However, it has often been neglected for use in ultrasonic transducers because of its low electro-mechanical coupling coefficients. Recent advances in signal processing have made this disadvantage less significant and we now report an investigation of the potential of LiNbO₃ composites for use in high temperature transducers for non-destructive testing (NDT). LiNbO₃ composites of 1–3 connectivity in room temperature vulcanising (RTV) sealant and cement matrices were fabricated by the dice and fill method. The RTV and the cement are specified to withstand temperatures up to 350 °C and 1600 °C, respectively. The composites have been characterized by electrical impedance measurement at ambient and elevated temperatures. In array configuration, transmit–receive signals from the back wall of a steel specimen were obtained at room temperature with good signal to noise ratio. High temperature measurements were made at temperatures up to 180 °C for the RTV composite and 360 °C for the cement composite configured as single element transducers. Temperature cycling has also been investigated and the new composite materials have been demonstrated to withstand several cycles without deterioration. It is concluded that they may contribute toward a solution to presently unsolved problems in NDT at elevated temperatures.     

Azobenzene‐Bridged Porphyrin Nanorings: Syntheses,Structures, and Photophysical Properties

Azobenzene‐bridged β‐to‐β and meso‐to‐meso porphyrin nanorings were successfully synthesized by a palladium‐catalyzed Suzuki–Miyaura coupling reaction in a logical synthesis. The dimeric structure was confirmed by XRD analysis. The azo linkages in di‐ and tetramers are in the all‐trans conformation, whereas in the trimers one azo linkage can be interconverted between cis and trans under external stimulation. When trimeric isomers are heated to 333 K or higher, the azo linkages will be in the all‐trans configurations: the pure all‐trans trimer can be kept in the dark for several months. Fluorescence anisotropy and pump‐power‐dependent decay results revealed excitation energy transfer for azobenzene‐bridged zinc–porphyrin nanorings. The distances between porphyrin units of these azobenzene‐bridged porphyrin arrays are almost the same, but the exciton energy hopping (EEH) times for each wheel are markedly different. The dimer and meso‐to‐meso tetramer possess relatively short excitation energy transfer (EET) times (1.28 and 2.48 ps, respectively) due to their good planarity and rigidity. In contrast, the EET time for the trimeric zinc(II)–porphyrin array (6.9 ps) is relatively long due to its nonradiative decay pathway (i.e., cis/trans isomerization of azobenzene). Both di‐ and tetramers exhibit relatively high fluorescence quantum yields, whereas the trimers show weak emission because of structural differences.     

DFT prediction and experimental observation of substrate-induced catalyst decomposition in ruthenium-catalyzed olefin metathesis

Ruthenacyclobutane decomposition, involving competitive beta-hydride transfer to Ru and reductive olefin elimination during ruthenium-catalyzed olefin metathesis, is predicted by density functional theory calculations and experimentally confirmed by propene and butene formation during degenerate Ru-methylidene-catalyzed metathesis of ethylene. The results provide new focus on the nature of ruthenium metathesis catalyst decomposition under catalytic conditions.