Synthesis and structural studies of complexes of Sb(III) and Bi(III) with thiosemicarbazones

Summary Several new complexes of Sb(III) and Bi(III) with thiosemicarbazones of furfuraldehyde, thiophene-2-carbaldehyde, indol-3-carbaldehyde and pyridine-2-carbaldehyde have been prepared and characterized by elemental analysis, conductivity, molecular weight determination and IR,¹H-and¹³C-NMR spectral studies. The ligands form complexes of the typeMX ₃ L[M=Sb(III) or Bi(III);X=chloride;L=ligand] which are found to be non-electrolytes inDMF. Spectral data indicate that the thiosemicarbazones act as bidentate ligands through the azomethine nitrogen and sulphur.

---

Synthese und Strukturuntersuchungen an Komplexen von Sb(III) and Bi(III) mit Thiosemicarbazonen

Zusammenfassung Es wurden einige neue Komplexe von Sb(III) und Bi(III) mit Tiosemicarbazonen von Furfural, Thiophen-2-carbaldehyd, Indol-3-carbaldehyd und Pyridin-2-carbaldehyd hergestellt und mittels Elementaranalyse, Leitfähigkeitsmessungen, Molekulargewichtsbestimmungen und IR-,¹H- bzw.¹³C-NMR-Spektroskopie charakterisiert. Die Komplexe sind vom TypMX ₃ L[M=Sb(III) oder Bi(III);X=Chlorid;L=Ligand] und sind inDMF Nichtelektrolyten. Die spektroskopischen Daten zeigen, daß die Thiosemicarbazone als zweizähnige Liganden über den Azomethin-Stickstoff und Schwefel wirken.

     

Spectrophotometric determination of vanadium using variamine blue and its application to synthetic, environmental and biological samples

A simple, rapid and accurate spectrophotometric method is described for the determination of trace amounts of vanadium using variamine blue (VB) as a chromogenic reagent. The method is based on the oxidation of variamine blue to form a violetcolored species on reaction with vanadium(V), having an absorption maximum at 570 nm. Beer’s law is obeyed in the range of 0.1–2.0 μg ml^?1. The molar absorptivity and Sandell’s sensitivity were found to be 1.65 × 10⁴ l mol^?1 cm^?1 and 0.003 μg cm^?2, respectively. Optimum reaction conditions were evaluated in order to delimit the linear range. The effect of interfering ions on the determination is described. The proposed method has been successfully applied to the determination of vanadium in steel, pharmaceutical, environmental, and biological samples.     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.     

Nucleation of β-hairpin structure in a pyrrole amino acid containing peptide

Synthesis and conformational studies of two short peptides containing pyrrole amino acids (1, Paa), Boc-Paa-Paa-d-Pro-Gly-Xaa-Paa-Paa-OMe (2: Xaa=Ala; 3: Xaa=Val), were carried out in which it was established that replacement of Ala in 2 with a Val residue helps peptide 3 to adopt a well-defined β-hairpin conformation in a nonpolar solvent, like CDCl₃.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Synthesis,spectral characterization and biological studies of transition metal(II) complexes with triazole Schiff bases

New metal based triazoles (1–12) have been synthesized by the interaction of novel Schiff base ligands (L¹–L³) with the Co(II), Ni(II), Cu(II) and Zn(II) metal ions. The Schiff base ligands and their all metal(II) complexes have been thoroughly characterized using various physical, analytical and spectroscopic techniques. In vitro bacterial and fungal inhibition studies were carried out to examine the antibacterial and antifungal profile of the Schiff bases in comparison to their metal(II) complexes against two Gram‐positive, four Gram‐negative and six fungal strains. The bioactivity data showed the metal(II) complexes to have more potent antibacterial and antifungal activity than their uncomplexed parent Schiff bases against one or more bacterial and fungal species. Copyright © 2012 John Wiley & Sons, Ltd.     

Nanoindentation as a Probe for Mechanically‐Induced Molecular Migration in Layered Organic Donor–Acceptor Complexes

Nanoindentation and scratch experiments on 1:1 donor–acceptor complexes, 1 and 2 , of 1,2,4,5‐tetracyanobenzene with pyrene and phenanthrene, respectively, reveal long‐range molecular layer gliding and large interaction anisotropy. Due to the layered arrangements in these crystals, these experiments that apply stress in particular directions result in the breaking of interlayer interactions, thus allowing molecular sheets to glide over one another with ease. Complex 1 has a layered crystal packing wherein the layers are 68° skew under the (002) face and the interlayer space is stabilized by van der Waals interactions. Upon indenting this surface with a Berkovich tip, pile‐up of material was observed on just one side of the indenter due to the close angular alignment of the layers with the half angle of the indenter tip (65.35°). The interfacial differences in the elastic modulus (21 %) and hardness (16 %) demonstrate the anisotropic nature of crystal packing. In 2 , the molecular stacks are arranged in a staggered manner; there is no layer arrangement, and the interlayer stabilization involves C? H???N hydrogen bonds and π???π interactions. This results in a higher modulus (20 %) for (020) as compared to (001), although the anisotropy in hardness is minimal (4 %). The anisotropy within a face was analyzed using AFM image scans and the coefficient of friction of four orthogonal nanoscratches on the cleavage planes of 1 and 2 . A higher friction coefficient was obtained for 2 as compared to 1 even in the cleavage direction due to the presence of hydrogen bonds in the interlayer region making the tip movement more hindered.     

Investigation on Impurity Profiling and Degradation Behavior of WCK 771

Chromatographia - WCK 771 is a novel antibacterial drug recently launched in India for the treatment of acute bacterial skin and skin structure infections (ABSSSI). This report describes...     

Validated liquid chromatography–tandem mass spectrometry method for simultaneous quantitation of bendamustine and copanlisib in mouse plasma: Application to a pharmacokinetic study in mice

In this study, we report the development and validation of an LC–tandem mass spectrometry method for the simultaneous quantitation of bendamustine and copanlisib in mouse plasma as per the US FDA regulatory guidelines. The sample processing involves extraction of bendamustine and copanlisib along with internal standard (IS; warfarin) from 50 μL mouse plasma using a liquid–liquid extraction method. The chromatographic separation of bendamustine, copanlisib and the IS was achieved on an Atlantis dC₁₈ column using an isocratic mobile phase (5 mM ammonium acetate:methanol, 20:80 v/v). Bendamustine, copanlisib and the IS eluted at 0.88, 1.39 and 0.74 min, respectively, with a total run time of 2.5 min. The calibration curve ranged from 3.99–2996 and 4.33–3248 ng/mL for bendamustine and copanlisib, respectively. Inter- and intra-day precision and accuracy, stability in processed samples and upon storage, dilution integrity and incurred sample reanalysis were investigated for both the analytes. The intra- and inter-day precisions were in the ranges of 2.01%–5.05% and 2.74%–6.13% and 1.98%–7.64 and 8.62%–9.04% for bendamustine and copanlisib, respectively. Stability studies showed that both analytes were stable on bench top for 6 h, in auto-sampler for 24 and at −80°C for 30 days. The validated method was successfully applied to a pharmacokinetic study in mice.     

Synthesis and Structural Characterization of Bioactive Ferrocenyl Substituted Hydrazones

Russian Journal of Coordination Chemistry - A series of ferrocenyl substituted hydrazones (I–VII) derived from ferrocene carboxaldehyde and substituted hydrazides have been prepared and...