Cellulose sulphuric acid as a biodegradable and reusable catalyst for the Knoevenagel condensation

A green, mild and efficient method for Knoevenagel condensation of 3-formylchromone/2-chlroquinoline-3-carbaldehyde with active methylene compounds such as Meldrum’s acid/ethyl cyanoacetate using biosupported cellulose sulphuric acid (CSA) in the solid-state by grinding under solvent-free condition has been developed. This method provides several advantages including environmental friendliness, shor t reaction times, high yields and a simple work-up procedure. Moreover, the CSA was successfully reused for four cycles without significant loss of activity.     

Generalized Split-Octonion Electrodynamics

Starting with the usual definitions of octonions and split octonions in terms of Zorn vector matrix realization, we have made an attempt to write the consistent form of generalized Maxwell’s equations in presence of electric and magnetic charges (dyons). We have thus written the generalized potential, generalized field, and generalized current of dyons in terms of split octonions and accordingly the split octonion forms of generalized Dirac Maxwell’s equations are obtained in compact and consistent manner. This theory reproduces the dynamic of electric (magnetic) in the absence of magnetic (electric) charges.     

Substrate-dependent structure, microstructure, composition and properties of nanostructured TiN films

Titanium nitride films of a thickness of ∼1.5 μm were deposited on amorphous and crystalline substrates by DC reactive magnetron sputtering at ambient temperature with 100% nitrogen in the sputter gas. The growth of nanostructured, i.e. crystalline nano-grain sized, films at ambient temperature is demonstrated. The microstructure of the films grown on crystalline substrates reveals a larger grain size/crystallite size than that of the films deposited on amorphous substrates. Specular reflectance measurements on films deposited on different substrates indicate that the position of the Ti-N 2s band at 2.33 eV is substrate-dependent, indicating substrate-mediated stoichiometry. This clearly demonstrates that not only structure and microstructure, but also chemical composition of the films is substrate-influenced. The films deposited on amorphous substrates display lower hardness and modulus values than the films deposited on crystalline substrates, with the highest value of hardness being 19 GPa on a lanthanum aluminate substrate.     

Structural and electrical studies of Ba5RTi3V7O30 (R=Ho,Gd, La) compounds

The ferroelectric ceramics Ba₅RTi₃V₇O₃₀ (R=Ho, Gd, La) have been synthesized by solid-state reaction technique. Preliminary X-ray structural analysis confirmed a single-phase formation of the compound in orthorhombic structure. Surface morphology of the compounds was studied by scanning electron microscopy (SEM). Detailed studies of electrical properties (i.e., dielectric constant, loss tangent, ac conductivity) as a function of temperature (RT-773 K) and at four different frequencies (1 kHz, 10 kHz, 100 kHz and 1 MHz) show ferroelectric–paraelectric phase transition of the compounds of diffuse-type. The activation energy has been evaluated from ac conductivity following Arrhenius equation. The conductivity pattern shows that it is strongly frequency dependent and obeys Jonscher's power relation.     

Rapid TLC Method for Estimation of Mevalonic Acid in the Leaves of Medicinal Plants

A simple, rapid, specific and sensitive thin layer chromatographic (TLC) method has been developed for the quantitative estimation of mevalonic acid (MVA) in leaves of medicinal plants; Artemisia annua, Psorelia corylifolia, Vinca rosea, Withania somnifera and Barleria proinites. The assay procedure involved conversion of MVA to its lactone, mevalonolactone (MVAL). Mevalonic acid was extracted from the leaf tissues of plants. Separation of MVAL was carried out on silica gel 60 F₂₅₄ TLC plates using benzene:acetone (3:2) as the mobile phase. The densitometric determination of MVAL was performed at 600 nm after derivatization with anisaldehyde reagent in absorption–reflectance mode. The method was validated over the linearity range of 100–500 ng spot^?1 and correlation coefficient for the calibration curve was >0.99. The average recovery of MVAL, used as internal standard, was higher than 98%. The lower limit of detection was found to be 50 ng spot^?1.     

Development of novel backwash cleaning technique for reverse osmosis in reclamation of secondary effluent

The objective of the study was to further develop a novel cleaning technique for reverse osmosis in reclamation of municipal secondary effluent. This technique is a new backwash method via direct osmosis (DO) by intermittent injection of the high salinity (HS) solution without stopping of high pressure pump and it is environment and membrane friendly technique. In the study, DO-HS trials were carried out with a UF-RO pilot system which was operated on site with the secondary treated effluent as the raw feed. Different operating conditions for DO-HS treatment in the actual process were investigated. It was found that the operation for implementation of the DO-HS cleaning technique developed was easy. For the first time, the actual profiles of HS concentration, DO backwash flow rate, brine flow rate and permeate pressure during DO-HS treatment have been demonstrated. It was observed that turbidity of the brine stream during DO-HS treatment at 3 NTU was 5 times higher than that before DO-HS treatment. The results from this study have confirmed the previous hypothesis with DO-HS treatment that there would be a strong driving force for DO backwash to lift and sweep the foulants from the membrane surface which would be carried over to the brine. The optimal plant operating conditions in terms of RO feed flow rate, HS concentration and HS injection time are ready for the DO-HS method to be adopted and validated in a long-term continuous plant operation.     

Expedient route to CDE ring system of schintrilactones through tandem ROM-RCM of a norbornene derivative

A concise synthesis of a highly functionalized tricyclic ring system representing the CDE core of nortriterpenoid schintrilactones A and B is described using a tandem ROM-RCM of a norbornene derivative.     

An expedient synthesis of ellipticine via Suzuki-Miyaura coupling

A simple and efficient total synthesis of ellipticine was developed via the Suzuki-Miyaura coupling of sterically sensitive 2-hydroxybenzeneboronic acid with a multifunctional aryl halide using Pd(OAc)₂ as a catalyst and Cu(OAc)₂·H₂O as an additive in DMSO/H₂O as a key step followed by double N-arylation and cyclization.     

A simple and rapid spectrophotometric determination of thallium(III) with trifluoperazine hydrochloride.

A simple, sensitive and rapid spectrophotometric method was developed for the determination of thallium(III) using trifluoperazine hydrochloride (TFPH). The method is based on the oxidation of TFPH by thallium(III) in a phosphoric acid medium to form a red-colored radical cation with an absorption maximum at 505 nm. Beer's law is valid over the concentration range of 0.5 - 6.5 microg ml(-1) of thallium(III). The molar absorptivity and Sandell's sensitivity of the color system are 2.14 x 10(4) l mol(-1) cm(-1) and 0.0095 microg cm(-2), respectively. The optimum reaction conditions and other analytical parameters were evaluated. The tolerance limit of the method towards various ions usually associated with thallium has been studied. The proposed method has been successfully applied to the analysis of thallium in alloys, minerals, standard reference material, water, and urine samples.     

Deuteron size effects on its elastic scattering from1H and4He

The effect of change in deuteron size on its elastic scattering from protons and alphas is investigated by varying the Hulthen parameters of the deuteron wave function in the scattering process. The cross sections forp-d scattering, calculated in the Born approximation, are found to increase substantially at backward angles even when the deuteron size is reduced by a small amount, whereas the shape of the angular distribution does not change significantly. For theα-d elastic scattering, interaction potential is obtained by folding the deuteron wave function and the optical potential for nucleon-scattering. The cross sections calculated atE _d = 13·7 MeV, shows that the first minimum around Θ_cm = 60° is deepend as the deuteron size is reduced, while at 52 MeV bombarding energy, the size effects are not very distinct. These observations are useful in the interpretation of deuteron cluster knockout reactions.