Kinetic Study of 1-β-Cyanoethyl Aziridine for Ring-Opening Polymerization Initiated with Alkyl Sulfate

The kinetics of the cationic polymerization of 1-β-cyanoethyl aziridine initiated 3-hydroxy- 1-propane sulfonic acid sultone and methyl tosylate have been studied. The course of polymerization involved the propagation stage and termination reaction due to the reaction between the growing chain and imino groups in the polymer chain. The propagation constants and termination constants were obtained. The enthalpies of activation for the propagation and termination reactions are ΔH_p? = 12.9 kcal/mol and ΔH_t? = 12.4 kcal/mol, and the entropies of activation are ΔS_p? = -31 cal/deg·mol and ΔS_t? = -39 cal/deg·mol. Otherwise, the polymerization initiated with methyl tosylate involved an early stage which was initiated very quickly.     

Synthesis and Properties of Phosphorus-Containing Aromatic Polyethers

The phosphorus-containing aromatic polyethers were prepared from bis(p-chlorophenyl)phenylphosphine oxide (BCPO) with the sodium salt of several bisphenols by high temperature solution polycondensation. The best result (yield 84%, n _sp /c = 0.15) was obtained from BCPO with bisphenol A (BPA) in dimethyl sulfoxide. However, the polymerization in the solvents such as N, N′-dimethyl-2-pyrrolidone, hexamethylphosphoramide, and N,N′-dimethylformamide, and the polymerization with the other bisphenols HO-C₆H₄-X-C₆H₄?OH, where X = CO, S0₂, CH₃P(O), C₆H₅P(O) in place of BPA gave gumlike polymers. The polymer prepared from BCPO and BPA did not decompose up to ca. 300°C under air or nitrogen atmosphere, but it decomposed slowly at 300–520°C, and decomposed rapidly at 520–540°C. The activation energy (δE) for the maximum rate of weight loss was 47.8 kcal/mole.     

DNA sensor: A novel electrochemical gene detection method using carbon electrode immobilized DNA probes

Abstract

The authors have developed a novel, rapid, convenient, and specific gene detection method, named the ‘DNA sensor,’ using a graphite electrode loaded with DNA probes. Synthesized oligonucleotide (5-TGCAGTTCCGGTGGCTGATC-3′) complementary to oncogene v-myc was employed for a model probe. The oligonucleotide was chemically adsorbed on a basal plane pyrolytic graphite (BPPG) electrode. The sensor was able to be applied to a hybridization reaction (40°C) in a linearized pVM623 solution carrying the Pst I fragment of v-myc (1.5 kbp).

After the hybridization reaction, the sensor was immersed into an acridine orange solution (1 μM) and washed with a phosphate buffer (pH 7.0). Acridine orange intercalated between base pairs of the formed double stranded DNAs on the electrode. The anodic peak potential of acridine orange that interacted with the DNAs on the electrode was measured. The positive shift of the peak potential increased in proportional to the pVM623 concentration in the hybridization reaction. 10^?1 g/ml of pVM623 was able to be detected in the buffer solution using the sensor. This gene detection was completed within an hour.     

Discovery of Oxysterol-Derived Pharmacological Chaperones for NPC1: Implication for the Existence of Second Sterol-Binding Site

1. Download : Download high-res image (181KB)
2. Download : Download full-size image

Highlights? Niemann-Pick disease type C is caused by folding defect in NPC1 protein ? Oxysterols and chemically optimized derivatives act as pharmacological chaperones ? Defects in localization, stability, maturation, and function were corrected in cell ? These derivatives bind to second sterol-binding site on NPC1 protein     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Highly meso-Diastereoselective Pinacol Coupling of Aromatic Aldehydes Mediated by Al Powder/Copper Sulfate in Water

Pinacol-type coupling reaction products presenting a high meso-diastereoselectivity (the ratio dl/meso was 4/96 up to 1/99) were obtained in fair to good yields (24–69%) using several aromatic aldehydes as starting materials and aluminium powder/copper sulfate as catalysts, in water, under reflux conditions.     

Invited Lecture. Ferroelectric liquid crystalline polymers and related model compounds with a low–moderate degree of polymerization

Abstract

Ferroelectric liquid crystalline polymers (FLCPs) with a low-moderate degree of polymerization were synthesized. These had a comb structure; the main chain was polyacrylate and the side chain consisted of a flexible spacer, a core and an optically active chiral end group. They exhibited electro-optic switching times ranging from a few milliseconds to a few seconds in the S*_c phase. As the molecular weight M _n increased, the range of the S*_c shifted to higher temperatures. At a given temperature, the switching time increased with M _n .

Spontaneous polarizations P _s , apparent cone angles 2θ, electro-optic switching times τ and rotational viscosities η of some polyoxyethylene FLCPs and corresponding low molecular weight ferroelectric liquid crystal materials (FLCs) were also measured. This is the first report of polyoxyethylene FLCPs. There was no significant difference in P _s and 2θ, which shows that the arrangement of the side chains in the FLCP is similar to that of the molecules in ordinary FLC. On the contrary, τ and η for the FLCPs were 10²–10³ times as large as those for FLCs. The rotational viscosity of the FLCP was mainly dependent on the side chain structure rather than on the spacer. Therefore collisions between adjacent side chains cause large η values in FLCPs rather than hindrance to side chain gyration due to the spacer group. By combining FLCPs with ITO-coated plastic substrates, a large area matrix driven display has been made. Although an improvement in switching time is still needed, a flexible and lightweight display like a sheet of paper will be available in the near future.     

Elution behaviour and environmental impact of heavy metals and rare-earth elements from volcanic ashes of Mt. Oyama,Miyake Island

To obtain information on the environmental impact of materials eluted from volcanic ashes of Mt. Oyama, Miyake Island, which erupted in July 2000, the dissolution behaviours of heavy metals and rare-earth elements from the volcanic ashes were examined. The most important characteristic of the Mt. Oyama eruption is that sulphur dioxide (SO₂) gas has been continuously released, and all persons living on Miyake Island have been required to evacuate. To estimate in terms of the volcanic eruption using SO₂ gas, the ash nature in Mt. Usu, Hokkaido, was also examined and compared with that in Mt. Oyama. When rain water mixed the ashes, the water from the ashes of Mt. Oyama became acidic because of the sulphuric acid. Therefore, SO₂ gas in Mt. Oyama can accelerate the dissolution of protons and heavy metals in the ashes, whereas the rain water in Mt. Usu was not acidic and the dissolution of the heavy metals was not so evident compared with that in the case of Mt. Oyama. With this sulphuric acid, heavy metals such as As, Cd, Pb and Hg in the ashes in Mt. Oyama easily dissolved owing to the low pH. The ashes in Mt. Oyama had been released for eight years and the amount of fallen ashes was estimated to be 33 billion tons. The weights of the harmful heavy metals in the volcanic ashes, such as As, Cd, Pb and Hg, were estimated to be 3.8?×?10², 1.3?×?10³, 1.1?×?10³ and 29?kg, respectively, and these heavy metals were dissolved and diluted in seawater. Therefore, the concentration and species (chemical form) of these metals should be carefully monitored in the future. Moreover, SO₂ gas, which has a direct effect on human health and has been monitored continuously, causes other effects, such as facilitation of metal ion elution and rock aeration.     

A New Synthesis of 3-Deoxy-D-Manno-Octulosonic Acid (KDO) From D-Mannose Via Condensation of Dioxene

Abstract

The title compound has long been known as an essential component of lipopolysaccharides (LPS) and capsular polysaccharides which exist in the outer membrane of Gram-negative bacteria. KDO has attracted additional attention as a consequence of some remarkable discoveries; i) mutants unable to produce KDO are non-viable.¹ ii) KDO is not present in mammalian cells,² iii) the 2-deoxy analog of β-KDO represents a new class of synthetic antimicrobial agent.^3,4 Although syntheses of KDO have been reported by many groups,^5–8 a more efficient synthetic method endowed with the potential for synthesis of not only complex glycoconjugates but also biologically significant analogs is required.     

Direct Synthesis of 1,4‐Diols from Alkenes by Iron‐Catalyzed Aerobic Hydration and C?H Hydroxylation

Various 1,4‐diols are easily accessible from alkenes through iron‐catalyzed aerobic hydration. The reaction system consists of a user‐friendly iron phthalocyanine complex, sodium borohydride, and molecular oxygen. Furthermore, the effect of additional ligands on the iron complex was examined for a model reaction. The second hydroxy group is installed by direct C(sp³) H oxygenation, which is based on a [1,5] hydrogen shift process of a transient alkoxy radical that is formed by formal hydration of the olefin.