Relative fermentability of lignocellulosic diluteacid prehydrolysates

The relative toxicity of the combined nonxylose components in prehydrolysates derived from three different lignocellulosic biomass feedstocks was determined. One woody (poplar) and two herbaceous (corn stover and switchgrass) feedstocks were dilute-acid pretreated under temperature and acid conditions chosen to optimize xylose recovery in the liquid prehydrolysate; xylose yields averaged 96,89,and 87% of theoretical for switchgrass,corn stover,and poplar,respectively. Prehydrolysates from each feedstock were neutralized,adjusted to equivalent xylose concentrations,and bioassayed for toxicity,using a standardized fermentation protocol withPichia stipitis NRRL 11545. Full time-courses for ethanol production (30-60 h) clearly illustrate the distinct inhibitory effects of prehydrolysates from different feedstocks. The relative toxicity of the prehydrolysates,ranked in order of decreasing toxicity,is poplar-derived prehydrolysates > switchgrass-derived prehydrolysates > corn stover-derived prehydrolysates. The inhibition of ethanol production appeared to be the result of a general slowdown of yeast metabolism,rather than the result of the production of alternative, nonethanol end products. Ethanol yields averaged 74,83,and 88% of control values for poplar,switchgrass,and corn stover prehydrolysates, respectively. Volumetric ethanol productivities (g ethanol L/h) averaged 32,70,and 102% of control values for poplar,switchgrass,and corn stover prehydrolysates,respectively. Ethanol productivities correlated closely with acetate concentrations in the prehydrolysates; however, regression lines correlating acetate concentrations and ethanol productivities were found to be feedstock-dependent. Oregon State University Agricultural Experiment Station Technical Publication Number 11114     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. II. p-vinylphenyl glycidyl ether: An epoxy-functionalized styrene

p-Vinylphenyl glycidyl ether (VPGE), a styrene derivative with an epoxy pendant, was polymerized by various cationic initiators, and its selective vinyl polymerization was investigated at low temperatures below ?15°C. BF₃OEt₂ (a metal halide) and CF₃SO₃H (a strong protonic acid) polymerized both vinyl and epoxy groups of VPGE, and produced cross-linked insoluble polymers. The HI/I₂ initiating system and iodine, in contrast, polymerized its vinyl group in polar solvents (CH₂Cl₂ and nitroethane) highly selectively in the temperature range of ?15 to ?40°C to give soluble polymers with a polystyrene backbone and epoxy pendants; however, under these conditions, 10–15% of the epoxy groups of the polymers were consumed during the polymerization by the reaction with the growing species. The polymerization by HI/I₂ in CH₂CI₂ involved a long-lived propagating species, as indicated by a progressive increase in the molecular weight (M?_n) of the polymers with monomer conversion and their fairly narrow molecular weight distributions (M?_w/M?_n ～ 1.6). The differences between the polymerizations of VPGE and p-isopropenylphenyl glycidyl ether, an α-methylstyrene-type counterpart of VPGE, were also discussed with an emphasis on the effects of the α-methyl group in the latter monomer.     

Regioselectivity of Friedel-Crafts acylation of aromatic compounds with several cyclic anhydrides

The Friedel-Crafts acylations of various aromatic compounds with cyclic anhydrides such as 2-(p-substituted phenyl)butanedioic, 3-phenylpentanedioic and homophathlic anhydrides were carried out under various conditions in order to obtain informations about the regioselectivity of the ring opening of the cyclic anhydrides and about the possible reaction pathways in the acylations.     

Synthesis of new hydrolyzable polyurethanes from L‐gulonic acid‐derived diols and diisocyanates

New polyurethanes with lactone groups in the pendants and main chains were synthesized by the polyaddition of two kinds of L ‐gulonolactone‐derived diols (2,3‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone and 5,6‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and by the subsequent deprotection of isopropylidene groups. They were hydrolyzed more quickly than the polyurethane derived from methyl β‐D ‐glucofuranosidurono‐6,3‐lactone in a phosphate buffer solution, the pH value of which was 8.0, at 27 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4158–4166, 2002     

Thalidomide as a nitric oxide synthase inhibitor and its structural development

Thalidomide has been found to exhibit weak nitric oxide synthase (NOS)-inhibitory activity. Structural development studies of thalidomide showed that some N-2,6-dimethylphenylhomophthalimide analogs possess NOS-inhibiting activity.     

Length dependence of the optical transition energies of the exactly solvable Hubbard model for linear polyenes

Some accurate results on the length dependence of the excitation energies from the ground state to ionic excited states in the Hubbard model of linear polyenes are obtained based on the method of Lieb and Wu. To this end, it is first shown that singly ionic excited states with “plus” alternancy symmetry in the Hubbard model are described by the wave functions in which the two electron operator [∑(?)ⁿCC] is acted on (N ? 2)-electron covalent eigenstates. Then by solving the Lieb-Wu equations the exact excitation energies of the lowest ionic state, which corresponds to the E state in this model, are calculated for systems with up to 50 electrons. The result, together with a correction for the end effect, indicates that the excitation energies do not decrease as 1/N but converge to the limiting value more rapidly when the number of electrons N becomes large.     

Control of charge-transfer-induced spin transition temperature on cobalt-iron Prussian blue analogues

The electronic and spin states of a series of Co-Fe Prussian blue analogues containing Na(+) ion in the lattice, Na(x)()Co(y)()Fe(CN)(6) x zH(2)O, strongly depended on the atomic composition ratio of Co to Fe (Co/Fe) and temperature. Compounds of Co/Fe = 1.5 and 1.15 consisted mostly of the Fe(III)(t(2g)(5)e(g)(0), LS, S = 1/2)-CN-Co(II)(t(2g)(5)e(g)(2), HS, S = 3/2) site and the Fe(II)(t(2g)(6)e(g)(0), LS, S = 0)-CN-Co(III)(t(2g)(6)e(g)(0), LS, S = 0) site, respectively, over the entire temperature region from 5 to 350 K. Conversely, compounds of Co/Fe = 1.37, 1.32, and 1.26 showed a change in their electronic and spin states depending on the temperature. These compounds consisted mainly of the Fe(III)-CN-Co(II) site (HT phase) around room temperature but turned to the state consisting mainly of the Fe(II)-CN-Co(III) site (LT phase) at low temperatures. This charge-transfer-induced spin transition (CTIST) phenomenon occurred reversibly with a large thermal hysteresis of about 40 K. The CTIST temperature (T(1/2) = (T(1/2) descending + T(1/2) ascending)/2) increased from 200 to 280 K with decreasing Co/Fe from 1.37 to 1.26. Furthermore, by light illumination at 5 K, the LT phase of compounds of Co/Fe = 1.37, 1.32, and 1.26 was converted to the HT phase, and the relaxation temperature from this photoproduced HT phase also strongly depended on the Co/Fe ratio; 145 K for Co/Fe = 1.37, 125 K for Co/Fe = 1.32, and 110 K for Co/Fe = 1.26. All these phenomena are explained by a simple model using potential energy curves of the LT and HT phases. The energy difference of two phases is determined by the ligand field strength around Co(II) ions, which can be controlled by Co/Fe.     

Characterization of phase transition of Ba2-xSrxIn2O5 by thermal analysis and high temperature X-ray diffraction

The phase transitions of Ba_2-xSr_xIn₂O₅ were investigated with various thermal analyses and high-temperature X-ray diffraction. It was clarified that crystal structure of Ba_2-xSr_xIn₂O₅ with x=0.0~0.4 varies from brownmillerite through distorted perovskite to another distorted perovskite with increase of temperature. The phase transition from brownmillerite to distorted perovskite was revealed to be first order, whereas transition from distorted perovskite to another one was second order. The specimen with x≥0.5 showed only one first order phase transition from brownmillerite to distorted perovskite. The phase diagram of Ba_2-xSr_xIn₂O₅ was established and existence of tricritical point at ~1100°C with x=0.4~0.5 was suggested. This revised version was published online in August 2006 with corrections to the Cover Date.     

Concentrations of 239,240Pu and 241Am of marine products in coastal waters of Ibaraki

More than 200 samples of marine products have been collected and analyzed for plutonium and almost 100 samples for americium around Hitachi, Tokai and Oarai in the pacific coast of Ibaraki prefecture. The data have shown that the concentration factor (CF) values for plutonium were 330 for bivalve, 770 for abalone (muscle) and 610 for brown algae. For americium, the CF was calculated as 2400 for bivalve, 1000 for abalone (muscle) and 420 for brown algae.     

Synthesis of marine guanidine alkaloids and their application as chemical/biological tools

Ptilomycalin A and crambescidins, novel marine guanidine alkaloids, have a unique pentacyclic guanidine structure, and exhibit a considerable array of biological activities. The first method developed for the synthesis of the pentacyclic guanidine core structure involved successive 1,3-dipolar cycloaddition reactions and resulted in the first total synthesis of crambescidin 359. The synthesis of other pentacyclic guanidine derivatives has been based on this methodology and applied as tools for studying biological activities, and as chemical reaction catalysts.