Synthesis of thiophene/phenylene co‐oligomers. II [1]. Block and alternating co‐oligomers

We report the synthesis of block and alternating thiophene/phenylene co‐oligomers that is based either on the Suzuki coupling reaction or on the Grignard reaction. These reaction schemes enable us to obtain the target compounds at reasonably high yields. The resulting materials have been fully characterized through the solid‐state ¹³C nmr and Fourier‐transform ir as well as the ¹H nmr. Of these, the solid‐state ¹³C nmr and ir are particularly useful in characterizing the materials of higher molecular weight, since those materials are difficult to dissolve in organic solvents.     

Vector model analysis in nondestructive imaging by using the photothermal deflection methods

The noncontact imaging of the buried structures is carried out in the open-air atmosphere by using the photothermal deflection (PTD) method. We applied these techniques to the layered samples. Besides the PTD images for the optically opaque buried structures, the parameters of the materials such as thermal diffusivity can also be calculated from the PTD amplitude and phase signal in the PTD scanning images. When the PTD signals at two different modulation frequencies are used, the thermal diffusivity of the buried structure can be obtained from the PTD signal outside of the sample nondestructively. Received: 27 November 1998 / Accepted: 18 March 1999 / Published online: 7 July 1999     

Thermodynamic properties of ethanol solution of chiral camphors and its derivatives

Enthalpies of mixing and the densities of ethanol solution of R- and S-enantiomers of camphor, 10-camphorsulfonamide, 10-camphorsulfonic acid, camphorquinone, and 10-camphorsulfonyl chloride have been measured for a wide range of mole fractions of heterochiral components at 298.15 K. Enthalpies of mixing were exothermic for all concentrations and heterochiral solutions were more stable than each of the homochiral solutions. Enthalpic stabilization of mixing of heterochiral solutions was increased with a decreasing concentration of all the camphor derivatives measured. The sequence of enthalpic stabilization on mixing was 10-camphorsulfonyl chloride, 10-camphorsulfonic acid, 10-camphorsulfonamide, camphor, and camphorquinone. Apparent molar volumes were determined and excess volumes of mixing of heterochiral solutions were small and negative. Enthalpic stabilizations were found to be dependent on dipole–dipole interaction between solutes and solvents.     

Nickel-catalyzed multi-component coupling reaction of aldimine, alkyne, and dimethylzinc via dimerization of butadiene

In the presence of a Ni/phosphine ligand catalyst, dimethylzinc, alkyne, butadiene, aldehyde, and primary amine were successively combined via dimerization of butadiene to provide (3E,7E,10Z)-dodecatrienylamine in good yields with excellent regio and stereoselectivities.     

An efficient solid‐state polycondensation method for synthesizing stereocomplexed poly(lactic acid)s with high molecular weight

Simultaneous solid‐state polycondensation (SSP) of the powdery prepolymers of poly(L ‐lactic acid) (PLLA) and poly(D ‐lactic acid) (PDLA) can produce entire stereocomplexed poly(lactic acid)s (sc‐PLA) with high molecular weight and can be an alternative synthetic route to sc‐PLA. Ordinary melt polycondensations of L ‐ and D ‐lactic acids gave the PLLA and PDLA prepolymers having medium molecular weight which were pulverized for blending in 1:1 ratio. The resultant powder blends were then subjected to SSP at 130–160 °C for 30 h under a reduced pressure of 0.5 Torr. Some of the products thus obtained attained a molecular weight (M_w) as high as 200 kDa, consisting of stereoblock copolymer of PLLA and PDLA. A small amount of the stereocomplex should be formed in the boundaries of the partially melted PLLA and PDLA where the hetero‐chain connection is induced to generate the blocky components. The resultant SSP products showed predominant stereocomplexation after their melt‐processing in the presence of the stereoblock components in spite of containing a small amount of racemic sequences in the homo‐chiral PLLA and PDLA chains. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3714–3722, 2008     

Direct electron transfer with glucose oxidase immobilized in an electropolymerized poly( N-methylpyrrole) film on a gold microelectrode

Direct electron transfer between active glucose oxidase (GOD) and a gold electrode was obtained when GOD was immobilized in poly(N-methylpyrrole) electrochemically prepared on the gold electrode. When electropolymerization was accomplished at 50 °C, after glucose addition, the cyclic voltammograms showed an increased oxidation peak at ca. ?0.45 V vs. Ag/AgCl. This potential corresponds to the oxidation potential for FADH₂. Although the GOD becomes much less selective, a glucose-dependent current response is obtained.     

Molecular-Dynamics Approach to the Magnetic Structure of Competing Magnetic Alloys: Fe-Cr Alloys

A molecular dynamics (MD) approach which determines automatically the complex magnetic structures in itinerant electron systems is applied to Fe-Cr alloys with use of 250 atoms in a MD unit cell (5×5×5 bcc lattice). It is demonstrated that the Fe-Cr alloys show various complex magnetic structures due to competing interactions: the collinear ferromagnetism (F) of matrix Fe with antiparallel Cr moments beyond 80 at.% Fe, the coexistence of non-collinear structure of Cr and collinear F of Fe between 50 and 75 at.% Fe, the coexistence of broken antiferromagnetism (AF) of Cr and the F of Fe between 25 and 45 at.% Fe, the coexistence of F of Fe and antiferromagnetic long-range order of Cr around 20 at.% Fe, the AF of Cr matrix with non-collinear Fe moments (spin-glass like structure) between 5 and 15 at.% Fe, and the AF below 5 at.% Fe. In the concentration region between 5 and 20 at.% Fe, ferromagnetic Fe pairs which are stabilized with different amplitudes of local moments are found. The magnetic phase diagram and calculated magnetic moments are shown to be consistent with the neutron, Mössbauer, and photoemission experiments.     

Analysis of red phosphorus in resins using pyrolysis-gas chromatography/mass spectrometry.

Although red phosphorus is used as a flame retardant for polymer materials, no analysis methods for it in resins has been established. Analysis methods for red phosphorus in resins were investigated using pyrolysis-gas chromatograpy/mass spectrometry (Py-GC/MS) by paying attention to the fact that it has a sublimation property. We found that the mass spectrum of red phosphorus shows a series of ions at m/z=62, 93 and 124, and a fragment pattern indicating that red phosphorus (P4=124, P=31) was pyrolytically decomposed. The coefficient of the correlation between the content of red phosphorus in the resin and the peak intensity in Py-GC/MS was 0.9781. The relative standard deviations of this analysis method was 6.29% (n=5). Py-GC/MS was applicable not only to qualitative analysis but also to the quantitative analysis of red phosphorus.