Knockdown of 14-3-3ζ enhances radiosensitivity and radio-induced apoptosis in CD133+ liver cancer stem cells

14-3-3ζ is related to many cancer survival cellular processes. In a previous study, we showed that silencing 14-3-3ζ decreases the resistance of hepatocellular carcinoma (HCC) to chemotherapy. In this study, we investigated whether silencing 14-3-3ζ affects the radioresistance of cancer stem-like cells (CSCs) in HCC. Knockdown of 14-3-3ζ decreased cell viability and the number of spheres by reducing radioresistance in CSCs after γ-irradiation (IR). Furthermore, the levels of pro-apoptotic proteins were upregulated in CSCs via silencing 14-3-3ζ after IR. These results suggest that 14-3-3ζ knockdown enhances radio-induced apoptosis by reducing radioresistance in liver CSCs.     

The role of adiponectin in the production of IL-6, IL-8, VEGF and MMPs in human endothelial cells and osteoblasts: implications for arthritic joints

This study was performed to evaluate the contribution of adiponectin to the production of interleukin (IL)-6, IL-8, vascular endothelial growth factor (VEGF), matrix metalloproteinase (MMP)-1 and MMP-13 in human endothelial cells and osteoblasts in arthritic joints. Cultured human umbilical vascular endothelial cells (HUVECs) and osteoblasts were stimulated with adiponectin (1 or 10 μg ml⁻¹) or IL-1β (0.1 ng ml⁻¹) in the presence or absence of hypoxia for 24 h. The protein expression patterns were examined by analyzing culture supernatants using the enzyme-linked immunosorbent assay (ELISA). Adiponectin significantly stimulated the production of VEGF, MMP-1 and MMP-13 in osteoblasts but not in endothelial cells, whereas it significantly stimulated the production of IL-6 and IL-8 in both endothelial cells and osteoblasts. The increase in VEGF production induced by adiponectin was significantly greater than that induced by IL-1β. The production of IL-6 and IL-8 in adiponectin-stimulated endothelial cells was approximately 10-fold higher than that in IL-1β-stimulated endothelial cells; in osteoblasts, adiponectin-induced IL-6 and IL-8 secretion was approximately twofold higher than that induced by IL-1β. In addition, IL-8 production in endothelial cells was approximately sevenfold higher than in osteoblasts. However, IL-6 levels were similar between the two cell types, suggesting that adiponectin may be involved in the production of IL-8 in endothelial cells, which may have an important role in neutrophil recruitment to arthritic joints. Furthermore, the increases in protein expression induced by adiponectin were differentially regulated by hypoxia. In conclusion, adiponectin has a more important role than does IL-1β in the production of mediators that drive synovitis and joint destruction in endothelial cells and osteoblasts at physiological concentrations.     

Thermal characterization and compatibility studies of perovskite-type Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) oxide with Cr2O3 at high temperature

The chemical compatibility of perovskite-type Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (BSCF) oxides with Cr₂O₃ has been examined between room temperature and 1,100 °C. Differential thermal analysis and thermogravimetric analysis were used to analyze the thermal behavior of BSCF–Cr₂O₃ binary mixtures in all composition ranges (0–100 mass% BSCF). The reaction products were identified by X-ray analysis after heating at 700–1,100 °C. As we expected, it was found that perovskite-type BSCF oxide had a poor chemical compatibility with the Cr₂O₃ oxide. In particular, the decomposition process of the BSCF–Cr₂O₃ binary mixture is quite complex and it starts at about 700–750 °C. The mixtures of BSCF and Cr₂O₃ oxides reacted forming mixed complex oxides based on (Ba/Sr)FeO₃, (Co/Fe)CrO₄, and (Ba/Sr)CrO₄ mixtures.     

Preparation of thermal-enhanced epoxy resin adhesive with organic PCM for applying wood flooring

Epoxy resins are well-known materials that show beneficial properties, such as high tensile strength and modulus, good adhesive properties, low cost, and ease of processing and environmental advantages. However, epoxy resin adhesive has no characteristic of thermal storage. Latent heat storage is one of the favorable kinds of thermal energy storage methods considered for energy saving and thermal efficiency in various fields, such as solar air conditioning systems and buildings. So we prepared thermal-enhanced epoxy resin adhesive by using PCM. This paper addresses the effects of n-hexadecane and sodium lauryl sulfate on the thermal properties and chemical properties of epoxy resin adhesive and HEAC, using differential scanning calorimetry, thermal gravimetric analysis, and Fourier transform-infrared spectroscopy. Also, we evaluated the applicability of composite epoxy resin adhesive to wood-based flooring using n-hexadecane, through measurement of bonding strength from universal testing machine analysis.     

Analytical quality solid-state composite reference electrode manufactured by injection moulding

An injection moulding method was used for fabricating solid-state reference electrodes (Ag/AgCl type) based on a polymer/inorganic salt composite. In this method, a silver/silver chloride wire was placed inside a mould into which the mixture of polymer and inorganic salt was injected. The obtained solid-state composite reference electrodes were extensively tested to study the influence of different parameters such as solution composition, the concentrations and mobility of ions and pH on the potential stability of the electrodes. These experiments revealed that the composite reference electrodes are insensitive to the matrix effect, have excellent potential readings stability and considerably reduced leakage of inorganic salt. The composite reference electrodes were compared favourably to high-quality commercial reference electrodes. It was concluded that the composite reference electrodes obtained by injection moulding are of analytical quality allowing for continuous, prolonged and intensive usage.     

A rapid polyol combustion strategy towards scalable synthesis of nanostructured LiFePO4/C cathodes for Li-ion batteries

In the present study, carbon-coated lithium iron phosphate (LiFePO₄/C) is prepared directly by a polyol-assisted pyro-synthesis performed under reaction times of a few seconds in open-air conditions. The polyol solvent, tetraethylene glycol (TTEG), acts as a low-cost fuel to facilitate combustion and the released exothermic energy promotes the nucleation and growth processes of the olivine nanoparticles. In addition, phosphoric acid (used as the phosphorous source) acts as a catalyst to accelerate polyol carbonization. The structure analysis of the as-prepared LiFePO₄/C using X-ray, neutron diffraction and ⁷Li NMR studies suggested the efficacy of the rapid technique to produce highly crystalline phase-pure olivine nanocrystals. The electron microscopy and particle-size distribution studies revealed that the average particle diameters lie below 100 nm and confirmed the presence of a surface carbon layer of 2–3 nm thickness. The thermal and elemental studies indicated that the carbon content in the sample was approximately 5 %. The prepared LiFePO₄/C cathode delivered capacities of 162 mA h g^-1 at 0.1 °C rates with impressive capacity retention for extended cycling. The polyol-assisted pyro-synthesis, which evades the use of external energy sources, is not only a straightforward, simple and timely approach but also offers opportunities for large-scale LiFePO₄/C production.     

Cucurbit[7]uril: A High‐Affinity Host for Encapsulation of Amino Saccharides and Supramolecular Stabilization of Their α‐Anomers in Water

Cucurbit[7]uril (CB[7]), an uncharged and water‐soluble macrocyclic host, binds protonated amino saccharides (D ‐glucosamine, D ‐galactosamine, D ‐mannosamine and 6‐amino‐6‐deoxy‐D ‐glucose) with excellent affinity (K_a=10³ to 10⁴ M ^?1). The host–guest complexation was confirmed by NMR spectroscopy, isothermal titration calorimetry (ITC), and MALDI‐TOF mass spectral analyses. NMR analyses revealed that the amino saccharides, except D ‐mannosamine, are bound as α‐anomers within the CB[7] cavity. ITC analyses reveal that CB[7] has excellent affinity for binding amino saccharides in water. The maximum affinity was observed for D ‐galactosamine hydrochloride (K_a=1.6×10⁴ M ^?1). Such a strong affinity for any saccharide in water using a synthetic receptor is unprecedented, as is the supramolecular stabilization of an α‐anomer by the host.     

Aqueous‐Solution Route to Zinc Telluride Films for Application to CO2 Reduction

As a photocathode for CO₂ reduction, zinc‐blende zinc telluride (ZnTe) was directly formed on a Zn/ZnO nanowire substrate by a simple dissolution–recrystallization mechanism without any surfactant. With the most negative conduction‐band edge among p‐type semiconductors, this new photocatalyst showed efficient and stable CO formation in photoelectrochemical CO₂ reduction at ?0.2–?0.7 V versus RHE without a sacrificial reagent.     

Effects of alumina phases on CO2 sorption and regeneration properties of potassium-based alumina sorbents

A range of potassium-based alumina sorbents were fabricated by impregnation of alumina with K₂CO₃ to examine the effects of the structural and textural properties of alumina on the CO₂ sorption and regeneration properties. Alumina materials, which were used as supports, were prepared by calcining alumina at various temperatures (300, 600, 950, and 1,200 °C). The CO₂ sorption and regeneration properties of these sorbents were examined during multiple tests in a fixed-bed reactor in the presence of 1 vol% CO₂ and 9 vol% H₂O. The regeneration capacities of the potassium-based alumina sorbents increased with increasing calcination temperature of alumina. The formation of KHCO₃ increased with increasing calcination temperature during CO₂ sorption, whereas the formation of KAl(CO₃)(OH)₂, which is an inactive material, decreased. These results is due to the fact that the structure of alumina by the calcination temperature is related directly to the formation of the by-product [KAl(CO₃)(OH)₂]. The structure of alumina plays an important role in enhancing the regeneration capacity of the potassium-based alumina sorbent. Based on these results, a new potassium-based sorbent using δ-Al₂O₃ as a support was developed for post-combustion CO₂ capture. This sorbent maintained a high CO₂ capture capacity of 88 mg CO₂/g sorbent after two cycles. In particular, it showed a faster sorption rate than the other potassium-based alumina sorbents examined.     

Naphthocrown‐Strapped Calix[4]pyrroles: Formation of Self‐Assembled Structures by Ion‐Pair Recognition

A new approach to the construction of self‐assembled structures is reported that is based on ion‐pair recognition. Towards this end, the calix[4]pyrrole naphthocrown‐4 hybrid structures 2 and 3 were prepared. These multitopic receptors contain recognition sites for both anions and cations. On the basis of solution‐phase ¹H NMR spectroscopic analysis and solid‐state single‐crystal X‐ray diffraction structural studies, it was established that receptors 2 and 3 are able to bind specific ion pairs with high selectivity via different binding modes. In the case of CsF and CsCl, the ion‐pair complexes formed from receptors 2 and 3 were found to self‐assemble to produce either linear supramolecular polymeric crystalline solids or nanotube‐like cyclic hexamers depending on the specific choice of ion pairs and crystallization solvents. Proton NMR studies provided evidence for solution‐phase self‐association in organic media.