Remediation of soil/concrete contaminated with uranium and radium by biological method

Biological method was studied for remediation of soil/concrete contaminated with uranium and radium. Optimum experiment conditions for mixing ratios of penatron and soil, and the pH of soil was obtained through several bioremediations with soil contaminated with uranium and radium. It was found that an optimum mixing ratio of penatron for bioremediation of uranium soil was 1 %. Also, the optimum pH condition for bioremediation of soil contaminated with uranium and radium was 7.5. The removal efficiencies of uranium and radium from higher concentration of soil were rather reduced in comparison with those from lower concentration of soil. Meanwhile, the removal of uranium and radium in concrete by bioremediation is possible but the removal rate from concrete was slower than that from soil. The removal efficiencies of uranium and radium from soil under injection of 1 % penatron at pH 7.5 for 120 days were 81.2 and 81.6 %, respectively, and the removal efficiencies of uranium and radium from concrete under the same condition were 63.0 and 45.2 %, respectively. Beyond 30 days, removal rates of uranium and radium from soil and concrete by bioremediation was very slow.     

Comparative Study of Methane Activation Process by Different Plasma Sources

In this paper, we compare the characteristics of methane activation by diverse plasma sources. The test conditions of reactant flow rate and composition are fixed for each plasma source to eliminate any possible misleading effects from varying test conditions. Among the diverse characteristics of each plasma source, we focus on the electron energy and degree of thermal activation in evaluating the cost-effectiveness of methane decomposition. The reaction is evaluated based on the selectivity of specific products, including H₂, C₂H₆, and C₂H₂. Among the tested plasma sources, those that provide a somewhat thermal environment have a rather high degree of warmness, resulting in higher methane conversion and lower operational costs. As the non-thermal characteristics of the plasma sources become stronger, the selectivity of C₂H₆ increases. This reflects C₂H₆ formation from the direct collision of CH₄ with high-energy electrons. On the other hand, as the degree of warmness increases, the selectivity of H₂ and C₂H₂ increase. The results give an insight into possible tools for process control or selectivity control by varying the degree of warmness in the plasma source. The process optimization and cost reduction of methane activation should be based on this concept of selectivity control.     

Silaffin Peptides as a Novel Signal Enhancer for Gravimetric Biosensors

Application of biomimetic silica formation to gravimetric biosensors has been conducted for the first time. As a model system, silaffin peptides fused with green fluorescent protein (GFP) were immobilized on a gold quartz crystal resonator for quartz crystal microbalances using a self-assembled monolayer. When a solution of silicic acid was supplied, silica particles were successfully deposited on the Au surface, resulting in a significant change in resonance frequency (i.e., signal enhancement) with the silaffin–GFP. However, frequency was not altered when bare GFP was used as a control. The novel peptide enhancer is advantageous because it can be readily and quantitatively conjugated with sensing proteins using recombinant DNA technology. As a proof of concept, this study shows that the silaffin domains can be employed as a novel and efficient biomolecular signal enhancer for gravimetric biosensors.     

Improved performance of dye sensitized ZnO nanorod solar cells prepared using TiO2 seed layer

Zinc oxide (ZnO) nanorods of different structures have been grown on indium-doped tin oxide substrates by using TiO₂ as seed layer. The ZnO nanorods have been prepared using TiO₂ seed layers annealed at different temperatures via a simple sol–gel method. The X-ray diffraction result indicates that the prepared samples are of wurtzite structure. Dye sensitized solar cells have been fabricated using the prepared ZnO nanorods. The open circuit voltage, short circuit current density, fill factor, and power conversion efficiency of the ZnO nanorod based dye sensitized solar cells prepared using TiO₂ seed layers annealed at different temperatures have been determined. The improvement in power conversion efficiency may be due to the flower like structured ZnO nanorods with smaller diameter and large specific surface area which paves way for the efficient electron transfer in hybrid solar cells.     

The potential use of mesenchymal stem cells in hematopoietic stem cell transplantation

In the last 10 years, mesenchymal stem cells (MSCs) have emerged as a therapeutic approach to regenerative medicine, cancer, autoimmune diseases, and many more due to their potential to differentiate into various tissues, to repair damaged tissues and organs, and also for their immunomodulatory properties. Findings in vitro and in vivo have demonstrated immune regulatory function of MSCs and have facilitated their application in clinical trials, such as those of autoimmune diseases and chronic inflammatory diseases. There has been an increasing interest in the role of MSCs in allogeneic hematopoietic stem cell transplantation (HSCT), including hematopoietic stem cell engraftment and the prevention and treatment of graft-versus-host disease (GVHD), and their therapeutic potential has been reported in numerous clinical trials. Although the safety of clinical application of MSCs is established, further modifications to improve their efficacy are required. In this review, we summarize advances in the potential use of MSCs in HSCT. In addition, we discuss their use in clinical trials of the treatment of GVHD following HSCT, the immunomodulatory capacity of MSCs, and their regenerative and therapeutic potential in the field of HSCT.     

Aurones and Flavonols from Coreopsis lanceolata L. Flowers and Their Anti-Oxidant,Pro-Inflammatory Inhibition Effects,and Recovery Effects on Alloxan-Induced Pancreatic Islets in Zebrafish

(1) Background: Many flavonoids have been reported to exhibit pharmacological activity; a preparatory study confirmed that Coreopsis lanceolata flowers (CLFs) contained high flavonoid structure content; (2) Methods: CLFs were extracted in aqueous methanol (MeOH:H₂O = 4:1) and fractionated into acetic ester (EtOAc), normal butanol (n-BuOH), and H₂O fractions. Repeated column chromatographies for two fractions led to the isolation of two aurones and two flavonols; (3) Results: Four flavonoids were identified based on a variety of spectroscopic data analyses to be leptosidin (1), leptosin (2), isoquercetin (3), and astragalin (4), respectively. This is the first report for isolation of 2–4 from CLFs. High-performance liquid chromatography (HPLC) analysis determined the content levels of compounds 1–4 in the MeOH extract to be 2.8 ± 0.3 mg/g (1), 17.9 ± 0.9 mg/g (2), 3.0 ± 0.2 mg/g (3), and 10.9 ± 0.9 mg/g (4), respectively. All isolated compounds showed radical scavenging activities and recovery activities in Caco-2, RAW264.7, PC-12, and HepG2 cells against reactive oxygen species. MeOH extract, EtOAc fraction, and 1–3 suppressed NO formation in LPS-stimulated RAW 264.7 cells and decreased iNOS and COX-2 expression. Furthermore, all compounds recovered the pancreatic islets damaged by alloxan treatment in zebrafish; (4) Conclusions: The outcome proposes 1–4 to serve as components of CLFs in standardizing anti-oxidant, pro-inflammatory inhibition, and potential anti-diabetic agents.     

TRANSIENT INTERMEDIATES IN INTRAMOLECULARLY PHOTOSENSITIZED PYRIMIDINE DIMER SPLITTING BY INDOLE DERIVATIVES

Abstract— Intramolecularly photosensitized pyrimidine dimer splitting can serve as a model for some aspects of the monomerization of dimers in the enzyme-substrate complex composed of a photolyase and UV-damaged DNA. We studied compounds in which a pyrimidine dimer was covalently linked either to indole or to 5-methoxyindole. Laser flash photolysis studies revealed that the normally observed photoejection of electrons from the indole or the 5-methoxyindole to solvent was diminished by an order of magnitude for indoles with dimer attached (dimer-indole and dimer-methoxyindole). The fluorescence lifetime of dimer-indole in aqueous methanol was 0.85 ns, whereas that of the corresponding indole without attached dimer (tryptophol) was 9.7 ns. Similar results were obtained for the dimer-methoxyindole (0.53 ns) and 5-methoxytryptophol (4.6 ns). The quantum yield of dimer splitting for the dimer-methoxyindole (φ₂₈₇K7 = 0.08) was only slightly greater than the value found earlier for the dimer bearing the unsubstituted indole (4>_2K7= 0.04). Transient absorption spectroscopy also revealed lower yields of indole radical cations following laser flash photolysis of dimer-indole compared to the indole without attached dimer. Dimer-methoxyindole behaved similarly. These results are interpreted in terms of an enhanced rate of radiationless relaxation of the indole and methoxyindole excited singlet states in dimer-indoles. The possible quenching of the indole and methoxyindole excited states via electron abstraction by the covalently linked dimer is discussed.     

Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of Poly(arylene ether amine)s from a Monomer Containing an Electron‐Donating Amine Group in a Nucleophilic Aromatic Substitution Reaction

Summary: Poly(arylene ether amine)s were synthesized by a nucleophilic aromatic substitution polycondensation of bis[4‐fluoro‐3‐(trifluoromethyl)phenyl]amine with several bisphenols. Even though the monomer has an electron‐donating diphenylamine moiety, which normally deactivates a nucleophilic aromatic substitution (S_NAr) reaction, the polymerization proceeded by a S_NAr reaction to give high‐molecular‐weight polymers. The polymers show good solubility in common organic solvents and have T_gs in the range of 123 °C to 177 °C.

High‐molecular‐weight poly(arylene ether amine)s synthesized by a S_NAr reaction with the monomer containing an electron‐donating diphenylamine moiety.