Novel regulation of aflatoxin B1 biosynthesis in Aspergillus flavus by piperonal

The present study investigated its inhibitory role in aflatoxin (AF) biosynthesis. Treating only AFB1- and B2-producing Aspergillus flavus with piperonal completely inhibited AFB1 production with high sclerotial formation, resulting in 20-fold higher AFG2 production. On the other hand, benzodioxole and eugenol suppressed AFB1 production without AFG formation, while methyleugenol showed potent inhibition of AFB1 production with slight production of AFG1. These results indicate that natural products may change aflatoxin biosynthesis, and highlight a novel regulation of AFG2 production by piperonal. It is the first report for chemical regulation on AFG2 production in non-AFG producing-aspergilli.     

Solution-Processable Low Voltage Organic Transistors of Thieno[3,2-b]thiophene-Based Conducting Polymer

A low-operating voltage and high performance polymeric field effect transistors using octadecylphosphonic acid-treated high-k AlOx and HfO₂ hybrid dielectrics were demonstrated. High-k metal oxide hybrid dielectrics were prepared by oxygen plasma treatment of deposited Al film for AlOx and by spin coating of solution-processable HfO₂ sol-gel solution for HfO₂ in combination with phosphoric acid-based self-assembled monolayer (SAM), resulting in high capacitance (10 nF/cm² for SiO₂, 600 nF/cm² for AlOx and 580 nF/cm² for HfO₂). With phosphoric acid-based SAM on high-k metal oxide and thermal annealing of thieno[3,2-b]thiophene-based conducting polymer, the device performance was significantly enhanced. The highest mobility of the transistors using ODPA-treated AlOx as a gate dielectric is 2.3 × 10^?2 cm² V^?1 s^?1 in the saturation region with the source-drain of ?2 V. In ODPA-treated HfO₂ hybrid dielectric, the saturated mobility is 1.1 × 10^?2 cm² V^?1 s^?1 and the threshold voltage was measured to be ?0.31 V, which is at least one order lower than SiO₂ hybrid dielectric (?3 V).     

Kahweol inhibits adipogenesis of 3T3-L1 adipocytes through downregulation of PPARγ

Kahweol, a compound from Coffea arabica, possesses antioxidant, anti-inflammatory, and antitumour properties. However, an anti-adipogenic effect has not yet been reported. In this study, we have shown that kahweol has an anti-adipogenic effect on 3T3-L1 adipocytes. Kahweol significantly inhibited the differentiation of intracellular lipid accumulation in 3T3-L1 adipocytes, without being cytotoxic. It also downregulated the expression of adipogenesis-related gene, including an adipocytokine, adiponectin. This anti-adipogenic effect stems from an ability to inhibit key adipogenic regulators, including PPARγ and C/EBPα. These results demonstrate that kahweol significantly inhibits the differentiation of 3T3-L1 cells, and suggest that it has potential as a novel anti-obesity treatment.     

Enhanced photocatalytic activity of Cu-doped ZnO nanorods

Cu-doped ZnO nanorods with different Cu concentrations were synthesized through the vapor transport method. The synthesized nanorods were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and UV–vis spectroscopy. The XRD results revealed that Cu was successfully doped into ZnO lattice. The FE-SEM images showed that the undoped ZnO has needle like morphology whereas Cu-doped ZnO samples have rod like morphology with an average diameter and length of 60–90 nm and 1.5–3 μm respectively. The red shift in band edge absorption peak in UV-vis absorbance spectrum with increasing Cu content also confirm the doping of Cu in ZnO nanorods. The photocatalytic activity of pure and Cu-doped ZnO samples was studied by the photodegradation of resazurin (Rz) dye. Both pure ZnO and the Cu-doped ZnO nanorods effectively removed the Rz in a short time. This photodegradation of Rz followed the pseudo-first-order reaction kinetics. ZnO nanorods with increasing Cu doping exhibit enhanced photocatalytic activity. The pseudo-first-order reaction rate constant for 15 % Cu-doped ZnO is equal to 10.17×10^?2min^?1 about double of that with pure ZnO. The increased photocatalytic activity of Cu-doped ZnO is attributed to intrinsic oxygen vacancies due to high surface to volume ratio in nanorods and extrinsic defect due to Cu doping.     

Multi-stacked organic light-emitting diodes using zinc oxide nanoparticle interfacial layers

Stacked organic light-emitting diodes (SOLEDs) with 30-nm nanoparticle (NP) interfacial layers were investigated. Zinc oxide (ZnO) was used as an interfacial layer between two green polymer (GP) layers. SOLEDs with NP interfacial layers had higher device efficiency than did a single-unit device due to the high probability of exciton recombination that originated from the Auger electron-assisted energy up-conversion process. Although the current density and luminance of SOLEDs with ZnO NP interfacial layers were smaller than those of the reference device, the efficiency was doubled because of the big band alignment difference and the large band gap between GP and ZnO NP interfacial layers, which induced more radiative-exciton recombination.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

Pd nanoparticles immobilized on PNIPAM–halloysite: highly active and reusable catalyst for Suzuki–Miyaura coupling reactions in water

Poly(N‐isopropylacrylamide)–halloysite (PNIPAM‐HNT) nanocomposites exhibited inverse temperature solubility with a lower critical solution temperature (LCST) in water. Palladium (Pd) nanoparticles were anchored on PNIPAM‐HNT nanocomposites with various amounts of HNT from 5 to 30 wt%. These Pd catalysts exhibited excellent reactivities for Suzuki–Miyaura coupling reactions at 50–70 °C in water. In particular, Pd anchored PNIPAM/HNT (95:5 w/w ratio) nanocomposites showed excellent recyclability up to 10 times in 96% average yield by simple filtration. Copyright © 2014 John Wiley & Sons, Ltd.     

Generation of single-crystalline domain in nano-scale silicon pillars by near-field short pulsed laser

We observe laser-induced grain morphology change in silicon nanopillars under a transmission electron microscopy (TEM) environment. We couple the TEM with a near-field scanning optical microscopy pulsed laser processing system. This novel combination enables immediate scrutiny on the grain morphologies that the pulsed laser irradiation produces. We find unusual transformation of the tip of the amorphous or polycrystalline silicon pillar into a single crystalline domain via melt-mediated crystallization. On the basis of the three-dimensional finite difference simulation result and the dark field TEM data, we propose that the creation of the distinct single crystalline tip originates from the dominant grain growth initiated at the apex of the non-planar liquid–solid interface. Our microscopic observation provides a fundamental basis for laser-induced conversion of amorphous nanostructures into coarse-grained crystals.     

Relationship between liquid crystalline phase stability and ingredient composition in liquid crystal oil–water emulsion

In this study, we postulated that the optical retardation magnitude could be used to evaluate the stability of the LC phase through the Mueller matrix polarimeter method in LC emulsion. In addition, we found that the increase of cetearyl alcohol concentration induced the more periodic dense lattice structure in crystalline phase of LC lamellae and the sorbitan olivate was relatively more responsible for higher ordering in LC phase compared to C12–20 alkyl glucoside in terms of molecular parallel packing on the basis of the optical retardation magnitude. Furthermore, it was confirmed that the LC emulsion had higher skin barrier function owing to lower TEWL and higher reflectance than ordinary emulsion on human skin and maintained a uniform phase without phase separation for 8 weeks.