Characterization of the chloranilate(*3-) pi radical as a strong spin-coupling bridging ligand

Dinuclear [(TPA)Co(II)(CA2-)Co(II)(TPA)](BF4)2.2MeOH (1) [TPA = tris(2-pyridylmethyl)amine] and [(TPA)CoII(CA*3-)CoII(TPA)](BF4).2Et2O (2) with a bridging chloranilate radical ligand formed by reduction of 1 are crystallographically and magnetically characterized. 1 has shown a weak antiferromagnetic coupling within the Co(II) dimer [J/kB = -0.65 K (-0.45 cm(-1))], while 2 has a 2 orders of magnitude stronger antiferromagnetic interaction between the Co(II) ion and a radical [J/kB = -75 K (52 cm(-1))].     

A Study of cryostructuring of polymer systems. 41. Complex and composite poly(vinyl alcohol) cryogels containing soluble and insoluble forms of chitosan,respectively

Complex macroporous poly(vinyl alcohol) (PVA) cryogels have been obtained by cryogenic treatment (freezing at–20°C for 12 h followed by defrosting at a rate of 0.03°C/min) of PVA–chitosan hydrochloride mixed solutions. The subsequent alkaline treatment of the cryogels has resulted in the transformation of the water-soluble salt form of chitosan into its insoluble basic form, which coagulates inside the bulk of the continuous phase of PVA cryogel into small particles with sizes of 2–5 µm. In the resulting composite cryogels, these particles play the role of an “active” filler, which increases the rigidity and heat endurance of the gel material. It has been shown that the sorption capacity of such chitosan particles entrapped into the bulk of composite cryogels with respect of bivalent copper ions is noticeably higher than the sorption capacity of ground chitosan particles incorporated as a discrete filler into the continuous phase PVA cryogels. The study of the properties of PVA–chitosan hydrochloride mixed solutions revealed that these polymers are, to a large extent, compatible with one another in a common solvent at a low ionic strength. Therefore, liquidliquid phase separation of these systems due to the thermodynamic incompatibility of macromolecules of different natures is observed only upon increasing the ionic strength by adding a low-molecular-mass salt (NaCl, 0.15 mol/L) to the solution.     

Synthesis, characterization, and spectroscopic analysis of antiaromatic benzofused metalloporphyrins

A two-electron oxidation of the Cu(II) (9) and Zn(II) (12) complexes of tetraphenyltetrabenzoporphyrin (TPTBP) results in the formation of stable antiaromatic [(TPTBP)Cu(II)(H(2)O)](2+)?2?[SbF(6)](-) (10) and [(TPTBP)Zn(II)(H(2)O)(2)](2+)?2?[SbF(6)](-) (13) with 16π electrons on the inner ligand perimeter. X-ray structures of the parent TPTBP complexes, the dications, and singly oxidized species [(TPTBP)Cu(II)](?+)[SbF(6)](-) (11) reveal that the use of TPTBP rather than a porphyrin ligand reduces the degree of nonplanarity in the 16π-electron species relative to the parent 18π complex. Significant high-field shifts of the (1)H?NMR signals of the outer ring protons and large positive values in calculations of nucleus-independent chemical shifts on the central cavity of the porphyrin ring provide unambiguous evidence for the antiaromatic character of the 16π Zn(II) species. A combination of magnetic circular dichroism spectroscopic studies and TD-DFT calculations on both the Zn(II) and Cu(II) species demonstrates that the main electronic bands of the dicationic species can be readily assigned by using Michl's 4N perimeter model. Femtosecond transient absorption studies clearly demonstrated that the number of π electrons on the inner ligand perimeter and the configuration of the central metal ion play a critical role in the excited-state relaxation dynamics. Redox potentials for conversion between the 16π, 17π, and 18π systems were measured by cyclic voltammetry in dichloromethane and benzonitrile, and UV/Vis spectra of each oxidation/reduction product were monitored by thin-layer spectroelectrochemistry.     

Discretization of nonlinear input-driven dynamical systems using the Adomian Decomposition Method

A numerical decomposition method proposed by Adomian provides solutions to nonlinear, or stochastic, continuous time systems without the usual restrictive restraints. It is applicable to differential, delay differential, integro-differential, and partial differential equations without the need for linearization or other restrictions. It also works through both uncoupled boundary conditions as well as delay systems. In the following paper, a new time discretization method for the development of a sample-data representation of a nonlinear continuous-time input-driven dynamical system is proposed. The proposed method is based on both the zero-order hold (ZOH) assumption as well as the Adomian Decomposition Method which exhibit unique algorithmic and computational advantages. To take advantage of this method, the following steps must be followed. First, the method is applied to a linear input-driven dynamical system to explicitly derive an exact sample-data representation, producing proper results. Second, the method is then applied to a nonlinear input-driven dynamical system, which thereby derives exact and approximate sample-data representations, the latter being most suited for practical applications. To evaluate the performance, the proposed discretization procedure was tested using simulations in a case study which involved an illustrative two-degree-of-freedom mechanical system that exhibited nonlinear behavior considering various control and input variable profiles. In conclusion, the suggested algorithm, in comparison to the results of a Taylor-Lie series expansion method, demonstrated increased performance and efficiency.     

Tracing the sources of stream sediments by Pb isotopes and trace elements

The objective of this research is to trace the sources of stream sediments in a small watershed influenced by anthropogenic and lithogenic origins identified by the spatial distributions and temporal variations of stream sediments using geochemical interpretation of the stable and radiogenic isotopes, major components, and heavy metals data and principal component analysis. To know the effects of both present and past mining, the stream sediments were sampled at the stream tributaries and sediment coring work. The spatial distributions of heavy metals clearly showed the effects of Cu and Pb?CZn mineralization zones at the site. Anthropogenic Pb was elevated at the downstream area by the stream sediments due to an active quarry. The results of principal components analysis also represent the effects of the stream sediments origins, including anthropogenic wastes and the active quarry and lithogenic sediment. Anomalous Cu, indicating the effect of past Guryong mining, was identified at the deep core sediments of 1.80?C5.05?m depth. The influence of active quarry was shown in the recently deposited sediments of <1.50?m depth, which was proved by the profiles of radioactive ²¹⁰Pb and stable Pb and Sr isotopes. This study suggests that the chemical studies using radiogenic and stable isotopes and heavy metals and multivariate statistical method are useful tools to discriminate the sources of stream sediments with different origins.     

Five‐coordinate dinuclar cobalt (II), copper (II), zinc (II) and cadmium (II) complexes with 4‐bromo‐N‐(2‐pyridinylmethylene)benzenamine: Synthesis,characterisation and methyl methacrylate polymerization

A series of late transition metal complexes, [(bpma)Co(μ – Cl)Cl] ₂ , [(bpma)Cu(μ – Cl)Cl] ₂ , [(bpma)Zn(μ – Cl)Cl] ₂ and [(bpma)Cd(μ – Br)Br] ₂ (where bpma is 4‐bromo‐N‐((pyridin‐2‐yl)methylene)benzenamine) have been synthesized and structurally characterized. The X‐ray structures of dimeric complexes [(bpma)M(μ – X)X] ₂ (M = Co, Cu and Zn, X = Cl; M = Cd, X = Br) showed a distorted 5‐coordinate trigonal bipyramidal geometry involving two nitrogen atoms of N,N‐bidentate ligand, two bridged and one terminal halogen atoms. The complex [(bpma)Cu(μ – Cl)Cl] ₂ revealed the highest catalytic activity for the polymerisation of methyl methacrylate in the presence of modified methylaluminoxane with an activity of 9.14 × 10⁴ g PMMA/mol·Cu·h at 60 °C and afforded syndiotactic poly (methylmethacrylate) (rr = 0.69).     

Structural and transport properties of cubic spinel ZnCo2O4 thin films grown by reactive magnetron sputtering

We report on the growth of cubic spinel ZnCo₂O₄ thin films by reactive magnetron sputtering and bipolarity of their conduction type by tuning of oxygen partial pressure ratio in the sputtering gas mixture. Crystal structure of zinc cobalt oxide films sputtered in an oxygen partial pressure ratio of 90% was found to change from wurtzite Zn_1−xCo_xO to spinel ZnCo₂O₄ with an increase of the sputtering power ratio between the Co and Zn metal targets, D_Co/D_Zn, from 0.1 to 2.2. For a fixed D_Co/D_Zn of 2.0 yielding single-phase spinel ZnCo₂O₄ films, the conduction type was found to be dependent on the oxygen partial pressure ratio: n-type and p-type for the oxygen partial pressure ratio below ∼70% and above ∼85%, respectively. The electron and hole concentrations for the ZnCo₂O₄ films at 300 K were as high as 1.37×10²⁰ and 2.81×10²⁰ cm⁻³, respectively, with a mobility of more than 0.2 cm²/V s and a conductivity of more than 1.8 S cm⁻¹.     

Stereoselective synthesis of pamamycin-607

A macrodiolide antibiotic pamamycin-607 was synthesized by joining two hydroxy acid components. Three cis-2, 5-disubstituted tetrahydrofuran rings in the molecule were stereoselectively prepared by radical cyclization reactions of beta-alkoxyvinyl ketone intermediates and a beta-alkoxymethacrylate substrate. The key step of the synthesis is characterized by the predominant threo product formation in the radical cyclization reaction of a beta-alkoxymethacrylate intermediate.