Rapid determination of phenylalanine with immobilized leuconostoc mesenteroides and a lactate electrode

A linear relationship is obtained between current decrease and log (phenylalanine concentration) from 5 × 10^-5 to 10^-7 g ml^-1. The assay was complete in 90 min with a standard deviation of ca. 6%. Phenylalanine was determined accurately in human blood serum.     

Bridge-terminal exchange of aluminum trialkyl dimers

The kinetic parameters of the bridge-terminal interconversion of triethylaluminum (TEA) in cyclopentane and in toluene as well as of tri-n-propylaluminum (TPA) in cyclopentane are obtained from the total line shape analysis of ¹³C NMR spectra with proton-decoupling. The enthalpies and entropies of activation of these aluminum alkyls and of trimethylaluminum (TMA) in both solvents are nearly the same, but the interconversion is faster in toluene than in cyclopentane, and also becomes faster as the alkyl chain of the aluminum compounds becomes longer. From these data and the heats of dissociation obtained thermochemically by M.B. Smith [J. Phys. Chem., 71 (1967) 365; J. Organometal. Chem., 21 (1970) 273, 46 (1972) 31 and 211], a possible mechanism of the bridge-terminal exchange is elucidated, in which the exchange proceeds “intramolecularly” for TMA and presumably TEA in cyclopentane. For the aluminum alkyls in toluene and for TPA in cyclopentane, on the other hand, the exchange may proceed “intermolecularly” with only a little contribution from an “intramolecular process”.     

The advantage of using carbon nanotubes compared with edge plane pyrolytic graphite as an electrode material for oxidase-based biosensors

Carbon nanotubes (CNTs) are promising materials for use in amperometric biosensors. The defect sites at their ends, and on their sidewalls, are considered to be edge plane-like defects and show high electrocatalytic activity toward several biological molecules. However, electrocatalytic activity toward H(2)O(2) has not been compared among bamboo-structured CNTs (BCNTs), which have many defect sites; hollow-structured CNTs (HCNTs), which have few defect sites; edge plane pyrolytic graphite (EPG); and traditional glassy carbon (GC). The advantages of using CNTs in electrodes for biosensors are still equivocal. To confirm the utility of CNTs, we analyzed the electrochemical performance of these four carbon electrodes. The slope of the calibration curve for H(2)O(2) at potentials of both +0.6 V and -0.1 V obtained with a BCNT paste electrode (BCNTPE) was more than 10 times greater than the slopes obtained with an HCNT paste electrode and a GC electrode, reflecting the BCNT's larger number of defect sites. Although the slope with the EPG electrode (EPGE) was about 40 times greater than that with BCNTPE at +0.6 V, the slopes with these two carbon electrodes were nearly equivalent at -0.1 V. EPGE demonstrated excessive electrochemical activity, detecting currents on the basis of consumption of oxygen and oxidation of ascorbic acid, even at -0.1 V. In contrast, BCNTPE could dominantly detect a cathodic current for H(2)O(2) at -0.1 V, even when interfering molecules were added. BCNTPE possesses appropriate electrochemical activity and is an effective electrode materials for developing interference-free oxidase-based biosensors operated by the application of an appropriate potential.     

Flow injection microbial trichloroethylene sensor

A flow type microbial biosensor for direct measurement of trichloroethylene (TCE) was developed. The unique features of this novel microbial sensor were the use of the TCE degrading bacterium Pseudomonas aeruginosa JI104, the electrical detection of the chloride ion released by microbial degradation, and flow cell made of glass. Glass cell was used in order to suppress adsorption of TCE and made a closed reaction cell. Vaporization of TCE during the measurement was prevented using closed flow cell. The performance of the sensor was evaluated from following aspects; such as pH of the carrier solution, amount of the immobilized microbe, flow rate and injection volume. The sensor signals were linearly proportional to the concentration of TCE in the range from 0.03 to 2 mgl(-1), which is suitable for the determination of suspected samples to be drinkable water or not. The sensor performance was checked on the real sample, and this system showed good response in ground water, indicating its applicability for the on line monitoring at TCE contaminated areas or hazardous sites.     

Selective piezoelectric odor sensors using molecularly imprinted polymers

Molecular imprinting technique has been used to create sensors with a predetermined selectivity for molecules in the gas phase. Piezoelectric quartz crystals coated with a 2-methylisoborneol (MIB) imprinted polymer gave responses which were consistently 5–10 Hz (1.1–1.3 times) higher than those of sensors coated with a non-imprinted polymer. Geosmin, another tertiary alcohol odorant with an earthy odor resembling, and often accompanying MIB, produced almost equal responses on either imprinted- or non-imprinted sensors. A number of other odorants were examined and their responses to the non-imprinted sensors were found to be similar to or greater than their responses to the imprinted sensors. The responses of MIB to the imprinted sensors were always the highest, while other odorants produced equal or higher responses using the non-imprinted sensor. The sensor has a detection limit of ca. 5 mg l⁻¹ and a dynamic range of at least 1000 mg l^−l. When the time taken for the sensor to stabilize is used as the response, instead of the frequency change, the detection limit is lowered to ca. 200 μg l^−l.     

A simple and highly repeatable colorimetric toxicity assay method using 2,6-dichlorophenolindophenol as the redox color indicator and whole eukaryote cells

A simple and highly reproducible toxicity assay method was studied by employing 2,6-dichlorophenolindophenol (DCIP) as a redox color indicator, baker’s yeast Saccharomyces cerevisiae, and a thermostable three-consecutive-stir unit. The absorbance of DCIP was decreased by increasing the metabolism activity of S. cerevisiae to intake glucose as an organic substance. By optimizing the measurement conditions, we obtained highly sensitive responses to glucose between 0.75 and 30 mg/L (eight points, n = 3) with an incubation time of the reaction mixture of 10 min at 30 °C. An excellent value of 1.15% was obtained as the average of the repeatability from eight points. Next, for the characterization of this method, we investigated the influence on the colorimetric response of dissolved substances, such as inorganic ions and surfactants, in natural water. Furthermore, the colorimetric responses to several toxicants were examined using Cu²⁺, Mn²⁺, Zn²⁺, Cr³⁺, and Fe³⁺ as heavy-metal ions and simazine as an agricultural chemical. As a result, notable colorimetric responses were obtained for Cu²⁺ and Mn²⁺ at several concentrations, and the results were compared with those obtained using river water as a real sample. In the stability test, responses to 30 mg/L glucose were obtained for 28 days when the yeast cell suspension was stored at 4 °C (response reduction, 43.9%; average of the relative standard deviation for nine testing days, 22.7%; average of repeatability, 1.01%). Figure Graphical image of the colorimetric toxicity assay     

Eicosapentaenoic acid release from the red alga Pachymeniopsis lanceolata by enzymatic degradation

Forty-eight species of seaweeds from Japanese waters were screened for the valuable polyunsaturated fatty acids eicosapentaenoic acid (EPA). The eight species that contained the highest levels of these compounds were analyzed in detail. Of all species tested the red alga Pachymeniopsis lanceolata contained the highest EPA concentration, and it was present as both the free and bound forms. EPA constituted 38.7% of total fatty acids, and polar lipids were the main constituent of the total lipids in P. lanceolata. EPA was obtained from the marine algae P. lanceolata by enzymatic hydrolysis of the total lipids extract using phospholipase A₂(PLA₂). The release of EPA reached a plateau after 10 min of enzymatic treatment. These results suggest that P. lanceolata is a useful natural source of EPA and that PLA₂ treatment is a convenient method for obtaining EPA from the red alga.     

A new type of sample tube for reducing convection effects in PGSE-NMR measurements of self-diffusion coefficients of liquid samples

Pulsed gradient spin-echo (PGSE) NMR measurements of the self-diffusion coefficients of low viscosity liquids are greatly hampered by the effects of convection especially away from ambient temperature. Here we report on a new NMR tube designed to minimize the deleterious effects of convection. In this tube, which derives from a Shigemi symmetrical NMR tube, the sample is contained in an annulus formed from a concentric cylinder of susceptibility matched glass. The performance of this tube was demonstrated by conducting measurements on the electrochemically important LiN(SO3CF3)2 (LiTFSI)-diglyme (DG) system. Calibrations were first made using DG at column heights of 2, 3, and 4-mm in the temperature range between -40 and 100 degrees C. Measurements of the diffusion coefficients of the lithium, anion, and DG were then performed to probe the solvent-ion and ion-ion interactions in the DG doped with LiTFSI. Changes in the 1H, 7Li, and 19F PGSE-NMR attenuation curves at -40 degrees C provided clear evidence of interactions between the DG and lithium ion.     

Photocontrolled binding of cytochrome C to immobilized spiropyran

Agarose gel was modified with polyethyleneimine and β-l-[3,3-dimethyl-6’-nitrospiro-(indoline-2,2’-2H-benzopyran)] propionic anhydride and the binding of cytochrome c was investigated. Cytochrome c was not retained on agarose modified only with polyethyleneimine. However, cytochrome c interacted with the immobilized spiropyran during illumination, but 0only a relatively small amount was bound to the immobilized spiropyran in the dark. The maximum difference of cytochrome c binding was observed at pH 6.8. Forty-six percent of cytochrome c bound on immobilized spiropyran in the column under visible light was released from the gel in the dark. This released cytochrome c showed the same spectrum and properties as those of native cytochrome c.