Synthesis and structural characterization of a new heterobimetallic coordination complex of barium and cobalt for use as a precursor for chemical vapor deposition

Ba(dmae)2 (dmaeH=N,N-dimethylaminoethanol, C4H11NO) reacts with Co(acac)2 (acac=2,4-pentanedionate) to produce the trinuclear coordination complex [Ba2Co(acac)4(dmae)3(dmaeH)] in an 85% yield. Spectroscopic and single-crystal X-ray diffraction experiments indicate that the complex possesses a structure in which two barium atoms and a cobalt atom are bridged by acac and dmae groups. The barium centers are eight and nine coordinate with BaO7N and BaO7N2 coordination spheres while the cobalt is a more regular CoO5N octahedron. This 2:1 heterobimetallic molecular complex was investigated as precursor for the deposition of thin film by AACVD. The film was characterized by SEM and XRD. TGA shows that the complex starts thermal decomposition upon heating in nitrogen atmosphere at 105 degrees C to produce barium cobalt oxide material of a Ba2CoO3 composition with an orthorhombic structure. The synthetic approach detailed here represents a unique route to the formation of a heterobimetallic barium cobalt coordination complex.     

Effect of ethanol on the interaction between poly(vinylpyrrolidone) and sodium dodecyl sulfate

The effect of ethanol on the interaction between the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic polymer poly(vinylpyrrolidone) (PVP) has been investigated using a range of techniques including surface tension, fluorescence, electron paramagnetic resonance (EPR), small-angle neutron scattering (SANS), and viscosity. Surface tension and fluorescence studies show that the critical micelle concentration (cmc) of the surfactant decreases to a minimum value around 15 wt % ethanol; that is, it follows the cosurfactant effect. However, in the presence of PVP, the onset of the interaction, denoted cmc(1), between the surfactant and the polymer is considerably less dependent on ethanol concentration. The saturation point, cmc(2), however, reflects the behavior of the cmc in that it decreases upon addition of ethanol. This results in a decrease in the amount of surfactant bound to the polymer [C(bound) = cmc(2) - cmc] at saturation. The viscosity of simple PVP solutions depends on ethanol concentration, but since SANS studies show that ethanol has no effect on the polymer conformation, the changes observed in the viscosity reflect the viscosity of the background solvent. There are significant increases in bulk viscosity when the surfactant is added, and these have been correlated with the polymer conformation extracted from an analysis of the SANS data and with the amount of polymer adsorbed at the micelle surface. Competition between ethanol and PVP to occupy the surfactant headgroup region exists; at low ethanol concentration, the PVP displaces the ethanol and the PVP/SDS complex resembles that formed in the absence of the ethanol. At higher ethanol contents, the polymer does not bind to the ethanol-rich micelle surface.     

Chemiluminescence from the oxidation of urea and ammonia with hypobromite and N-bromosuccinimide

The spectral distribution for the chemiluminescent oxidation of ammonia with hypobromite is significantly different to that for the oxidation of ammonia with N-bromosuccinimide. Therefore, in contrast to the assumptions of several authors, the action of N-bromosuccinimide is not solely derived from the in situ formation of hypobromite. Neither the oxidation of urea with hypobromite nor the oxidation of urea with N-bromosuccinimide involves an initial hydrolysis of urea to ammonia in the alkaline solution. However, these two reactions lead to a common emitter. The addition of xanthene dyes, such as dichlorofluorescein, enhance the chemiluminescence intensity by energy transfer to the efficient fluorophore, but reaction between the sensitiser and hypobromite can result in a significant increase in the background signal. A list of potential interferences has been compiled; particular attention was paid to guanidino compounds, as the chemiluminescence accompanying the oxidation of this functional group has not been previously discussed.     

Multiplex digital PCR: breaking the one target per color barrier of quantitative PCR

Quantitative polymerase chain reactions (qPCR) based on real-time PCR constitute a powerful and sensitive method for the analysis of nucleic acids. However, in qPCR, the ability to multiplex targets using differently colored fluorescent probes is typically limited to 4-fold by the spectral overlap of the fluorophores. Furthermore, multiplexing qPCR assays requires expensive instrumentation and most often lengthy assay development cycles. Digital PCR (dPCR), which is based on the amplification of single target DNA molecules in many separate reactions, is an attractive alternative to qPCR. Here we report a novel and easy method for multiplexing dPCR in picolitre droplets within emulsions-generated and read out in microfluidic devices-that takes advantage of both the very high numbers of reactions possible within emulsions (>10(6)) as well as the high likelihood that the amplification of only a single target DNA molecule will initiate within each droplet. By varying the concentration of different fluorogenic probes of the same color, it is possible to identify the different probes on the basis of fluorescence intensity. Adding multiple colors increases the number of possible reactions geometrically, rather than linearly as with qPCR. Accurate and precise copy numbers of up to sixteen per cell were measured using a model system. A 5-plex assay for spinal muscular atrophy was demonstrated with just two fluorophores to simultaneously measure the copy number of two genes (SMN1 and SMN2) and to genotype a single nucleotide polymorphism (c.815A>G, SMN1). Results of a pilot study with SMA patients are presented.     

Atmospheric pressure chemical vapour deposition of fluorine‐doped tin(IV) oxide from fluoroalkyltin precursors

Perfluoroalkytin compounds R_(4−n)Sn(R_f)_n (R = Me, Et, Bu, R_f = C₄F₉, n = 1; R = Bu, R_f = C₄F₉, n = 2, 3; R = Bu, R_f = C₆F₁₃, n = 1) have been synthesized, characterized by ¹H, ¹³C, ¹⁹F and ¹¹⁹Sn NMR, and evaluated as precursors for the atmospheric pressure chemical vapour deposition of fluorine‐doped SnO₂ thin films. All precursors were sufficiently volatile in the range 84–136 °C and glass substrate temperatures of ca 550 °C to yield high‐quality films with ca 0.79–2.02% fluorine incorporation, save for Bu₃SnC₆F₁₃, which incorporated <0.05% fluorine. Films were characterized by X‐ray diffraction, scanning electron microscopy, thickness, haze, emissivity, and sheet resistance. The fastest growth rates and highest quality films were obtained from Et₃SnC₄F₉. An electron diffraction study of Me₃SnC₄F₉ revealed four conformations, of which only the two of lowest abundance showed close F Sn contacts that could plausibly be associated with halogen transfer to tin, and in each case it was fluorine attached to either the γ‐ or δ‐carbon atoms of the R_f chain. Copyright © 2005 John Wiley & Sons, Ltd.     

Thermochemistry of Binding of Lead(II) and Cadmium(II) by Saccharides in Aqueous Solution

Solution calorimetry was used to determine enthalpies and stability constants for binding of lead(II) or cadmium(II) by galacturonic acid and several monosaccharides in aqueous solution. New values for enthalpies of solution in water are reported for galacturonic acid and maltose monohydrate. The interaction of water solvent with the reactants is the largest factor in the binding process.     

Characterisation of the ester-substituted products of the reaction of p-t-butyl calix[4]arene and ethyl bromoacetate using LC-UV-MS and LC-DAD

A series of derivatisation reactions between p-t-butyl calix[4]arene and ethyl bromoacetate were carried out in order to prepare 1,3 diester substituted calix[4]arene. Mass spectral data, obtained from direct injection of samples, indicated that the reactions were rich in the desired product. Since the ultra violet (UV) spectra of the desired product and possible impurities are very similar, liquid chromatography (LC) chromatographic data seemed to corroborate these results. However, when on-line LC-UV-MS was carried out and each LC peak subjected to MS analysis as it eluted, a very different picture emerged. It was found that many of these reactions actually contained high levels of the monoester product which, having less affinity for sodium in the MS, is therefore seriously underestimated in any direct injection assay. LC-diode array detection (DAD) methods were also used to help successfully identify and characterise the compounds being formed in these complex reactions. The overall results obtained in this paper allowed the optimal reaction conditions to be determined for this reaction. LC-MS analysis of the chromatographic peaks also identified the presence of two isomers of the diester substituted calix[4]arene (1,3 and 1,2 diesters). The combination of LC and UV/MS detection is required for accurate analysis of the products of such reactions.     

Localized defects in classical one-dimensional models

Several aspects of localized defects in the Frenkel-Kontorova, classicalXY chain and analogous models with a finite range of interactions are discussed from a general point of view. Precise definitions are given for defect phase shifts (charges) and for creation, pinning, and interaction energies. Corresponding definitions are also provided for interfaces (localized regions separating two phases). For the nearest-neighbor Frenkel-Kontorova model, the various defect energies are related to areas enclosed by contours joining heteroclinic points of the area-preserving map generated by the conditions of mechanical equilibrium.     

An approximately divergence-free 9-node velocity element (with variations) for incompressible flows

Explicit basis functions are constructed for 9-node biquadratic velocity fields which guarantee that a weak form of the continuity equation is satisfied. The corresponding pressure approximations are either piecewise constant, piecewise linear or piecewise bilinear. These results are extended to give bases for bilinear velocity/piecewise constant pressure elements and also to some three-dimensional brick elements.