Improved method for titrimetric determination of sulphide by the iodine-azide reaction

A sensitive procedure for the determination of sulphide is described. The method depends on the extent to which the iodine-azide reaction has been catalysed by sulphide, and this is measured by titration of the amount of iodine consumed in a fixed time period.     

A promising polymer material for repairing body parts of machines

The results of experimental studies of the developed polymer material based on AN-110 acrylic adhesive and F-40 elastomer are given. A calibration technique for polymer-coated holes is described. A repair technique for body parts of motor tractor vehicles using the developed polymer material is presented.     

Flow enthalpimetric determination of glucose, based on oxidation by 1,4-benzoquinone and use of an immobilized glucose oxidase column

A flow enthalpimetric method for the determination of glucose is presented. The method is based on the reaction of glucose with 1,4-benzoquinone in the presence of immobilized glucose oxidase. d-Glucose concentrations ranging from 0.02 to 75mM can be determined. The method is applicable to the determination of glucose in soft drinks, wines, beers, jams and serum.     

Determination of l-phenylalanine in serum by flow-injection analysis using immobilized phenylalanine dehydrogenase and fluorimetric detection

A flow-injection system with an immobilized enzyme reactor is proposed for the determination of l-phenylalanine. Phenylalanine dehydrogenase from Rhodoccus sp. M4 was immobilized on tresylated poly (vinyl alcohol) beads (13 mum) and packed into a stainless-steel column (5 cm x 4 mm i.d.). Serum sample was deproteinized with tungstic acid and filtered through an ultrafiltration membrane. The sample solution (30 mul) was injected into the carrier stream (water). The NADH formed was detected at 465 nm (excitation at 340 nm). The calibration graph was linear for 0.9-600 mum l-phenylalanine; the detection limit was 0.3 mum. The sample throughout was 25 h(-1) without carryover. The half-life period of the immobilized enzyme was 23 days.     

Use of a manganese dioxide column in the flow enthalpimetric determination of hydrogen peroxide

A method for flow enthalpimetric determination of H₂O₂ is described. The method uses manganese dioxide to catalyse the decomposition of H₂O₂. The catalyst is stable enough to be used for at least 500 analyses. H₂O₂ in the concentration range 0.01–10mM is determined with coefficients of variation < 2%. The method has been used for determination of glucose in a non-alcoholic beverage and wines, with glucose oxidase as the peroxide-producing enzyme.     

Determination of glycerol, 1,2-propanediol and triglycerides by high-performance liquid chromatography and a post-column reactor containing immobilized glycerol dehydrogenase

A fluorimetri method is described for the determination of glycerol, 1,2-propanediol and triglycerides in serum by high-performance liquid chromatography with an on-line post-column reactor containing immobilized glycerol dehydrogenase. Before separation, triglycerides are cleaved with lipase and esterase. The polyhydric alcohols are separated from each other on a Finepak SIL C₁₈ (10 μm) column with water as eluent. The NADHI produced from the enzymatic reaction is monitored by fluorimetry. Calibration curves are linear between 0.01 mM and 1.0 mM for glycerol or 2.0 mM for 1,2-propanediol. The method gave satisfactory results for control sera.     

Flow-injection system for the fluorimetric determination of fructose with an immobilized mannitol dehydrogenase reactor

Immobilized mannitol dehydrogenase is used for the determination of D-fructose in a flow-injection system. The enzyme is immobilized on poly(vinyl alcohol) beads. The oxidation of NADH occurs simultaneously and the disappearance of NADH is measured fluorimetrically. The response is linearly related to fructose concentration in the range 6–600 μM; 30 samples per hour can be analysed. The immobilized enzyme retains over 80% of its initial activity after repetitive use for 2 months.     

Poly(allylamine) beads as selective sorbent for preconcentration of formaldehyde and acetaldehyde in high-performance liquid chromatographic analysis

Formaldehyde and acetaldehyde in water were determined by preconcentration with poly(allylamine) beads, derivatization with 2,4-dinitrophenylhydrazine (DPH) and analysis by HPLC. Poly(allylamine) beads (0.5 g) were used to adsorb formaldehyde and acetaldehyde at 1.2-150 microg l(-1) and 3.5-220 microg l(-1) from water (1 l). The concentration factor is 50 fold. The aldehydes were eluted and derivatized with 2 mM DPH in 0.5 M H2SO4 (10 ml). The time of analysis was 1 h. The detection limits (S/N=3) for formaldehyde and acetaldehyde were 0.6 and 2 microg l(-1), respectively.     

Thermometric titration of some molybdates,molybdic acid,and molybdenum trioxide

A thermometric titrator equipped with differential thermistor is used for the titration of molybdenum in sodium molybdate, potassium molybdate, magnesium molybdate, tetramethylammonium molybdate, and tetraethylammonium molybdate, based on their reactions with hydrochloric acid, and in ammonium paramolybdate, molybdic acid, and molybdenum trioxide, based on their reactions with sodium hydroxide. Orthomolybdates and ammonium paramolybdate were determined in the 0.5–0.005 M range; sufficient solid molybdic acid or molybdenum trioxide was taken to give a final 0.01–0.5 M solution in 20 ml of water. The method is simple and very quick. The standard deviation varies from 0.5 to 1.5% depending on the amount of sample taken.