Crystallinity and morphology dependent luminescence of Li-doped Y2−xGdxO3:Eu thin film phosphors

The influence of lithium doping on the crystallization, the surface morphology, and the luminescent properties of pulsed laser deposited Y_2−xGd_xO₃:Eu³⁺ thin film phosphors was investigated. The crystallinity, the surface morphology, and the photoluminescence (PL) of films depended highly on the Li-doping and the Gd content. The relationship between the crystalline and morphological structures and the luminescent properties was studied, and Li⁺ doping was found to effectively enhance not only the crystallinity but also the luminescent brightness of Y_2−xGd_xO₃:Eu³⁺ thin films. In particular, the incorporation of Li and Gd into the Y₂O₃ lattice could induce remarkable increase in the PL. The highest emission intensity was observed Li-doped Y_1.35Gd_0.6O₃:Eu³⁺ thin films whose brightness was increased by a factor of 4.6 in comparison with that of Li-doped Y₂O₃:Eu³⁺ thin films.     

Enhanced ferromagnetic properties of diluted Fe doped ZnO with hydrogen treatment

The single-phase diluted magnetic Fe-ion (5%) doped ZnO powders were prepared by solid-state reaction method. The powders were annealed in Ar or Ar/H₂(5%) atmosphere at 1200 °C. The crystal structure, electric and magnetic properties for the Zn_0.95Fe_0.05O powders have been studied with X-ray diffraction (XRD) vibrating sample magnetometer, resistance and Hall measurement. All the peaks for the XRD pattern of samples belong to the hexagonal (P6₃mc) lattice of ZnO, and no indication of a secondary phase. The lattice parameters for the Zn_0.95Fe_0.05O with an annealing in Ar/H₂(5%) atmosphere were a₀=3.256 Å and c₀=5.206 Å at room temperature. The hysteresis curve for the Zn_0.95Fe_0.05O at room temperature was enhanced ferromagnetic behaviour with an annealing in Ar/H₂(5%) atmosphere. We give an explanation for enhanced ferromagnetic behaviour with H₂ treatment by electric properties.     

Structural and functional stabilities of artificially designed DNA ultra-thin films grown by silica Assistance

We report the structural and functional stabilities of artificially synthesized DNA ultra-thin films. Fully covered DNA ultra-thin films on a silica substrate were fabricated by the silica-assisted growth method and those samples were then incubated in various chemicals and physical conditions. The DNA ultra-thin films showed high maintainability under those harsh conditions and these results would aid to facilitate the use of artificial DNA ultra-thin films in advanced research areas such as biophotonics and bioelectronics.     

Electroreduction of oxygen on Pd catalysts supported on Ti-modified carbon

Carbon supports modified with well dispersed anatase TiO₂ (C–Ti-X; X (0.25, 0.5, 0.75, and 1.0) represents mass ratio of Ti precursor to carbon) were synthesized with various Ti loadings and used to support Pd catalysts for oxygen reduction. The anatase nanoparticles increased in size with increasing Ti loading. Pd dispersion improved with increasing Ti loading up to the C–Ti-0.75, which resulted in the best catalytic activity. Although the Pd dispersion was lowest on the C–Ti-1.0, it showed better catalytic performance than the catalysts supported on C–Ti-0.25 and C–Ti-0.5. At 0.8 V (vs. RHE), the best catalytic activity achieved was respectively 2.7 and 2.7 times the mass and specific activities of Pd supported on un-modified carbon. The interaction between Pd and highly dispersed TiO₂ is believed to improve the catalytic activity of Pd supported on TiO₂-modified carbons.     

Bounded harmonic maps on a class of manifolds

Without imposing any curvature assumptions, we show that bounded harmonic maps with image contained in a regular geodesic ball share similar behaviour at infinity with the bounded harmonic functions on the domain manifold.

     

Polarized light-scattering measurements of dielectric spheres upon a silicon surface

The polarization of light scattered into directions out of the plane of incidence by polystyrene latex spheres upon a silicon substrate was measured for p -polarized incident light. The experimental data show good agreement with theoretical predictions for three sizes of spheres. These results demonstrate that the polarization of light scattered by particles can be used to determine the size of particulate contaminants on silicon wafers. Theoretical models, based on successive degrees of approximation, indicate that the mean distance of a particle from the surface is the primary determinant of the scattered light polarization for small out-of-plane scattering angles.     

A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Mössbauer Studies and Magnetic Properties of Y3−x Ce x Fe5O12

It is shown that in-situ ^166mHo (I = 7) in a spherical single crystal of HoF₃ can be used as sensitive internal thermometer to thermally detect NMR (NMR-TDNO) from the 100% abundant stable ¹⁶⁵Ho (I = 7/2) nuclei. In addition, new ^166mHo NMRON results are reported. Both the ^166mHo NMRON and ¹⁶⁵Ho NMR-TDNO spectra show three distinct quadrupolar split sub-resonances, in zero applied field. The data is used to make estimates of the Ho magnetic moments and quadrupole parameters for the ^166mHo and ^166mHo sites.