Enzyme production and profile by Aspergillus niger during solid substrate fermentation using palm kernel cake as substrate

The oil palm sector is one of the major plantation industries in Malaysia. Palm kernel cake is a byproduct of extracted palm kernel oil. Mostly palm kernel cake is wasted or is mixed with other nutrients and used as animal feed, especially for ruminant animals. Recently, palm kernel cake has been identified as an important ingredient for the formulation of animal feed, and it is also exported especially to Europe, South Korea, and Japan. It can barely be consumed by nonruminant (monogastric) animals owing to the high percentages of hemicellulose and cellulose contents. Palm kernel cake must undergo suitable pretreatment in order to decrease the percentage of hemicellulose and cellulose. One of the methods employed in this study is fermentation with microorganisms, particularly fungi, to partially degrade the hemicellulose and cellulose content. This work focused on the production of enzymes by Aspergillus niger and profiling using palm kernel cake as carbon source.     

DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

Guanidinium Alkynesulfonates with Single‐Layer Stacking Motif: Interlayer Hydrogen Bonding Between Sulfonate Anions Changes the Orientation of the Organosulfonate R Group from “Alternate Side” to “Same Side”

Hydrolyses of HC?CSO₃SiMe₃ ( 1 ) and CH₃C?CSO₃SiMe₃ ( 2 ) lead to the formation of acetylenic sulfonic acids HC?CSO₃H?2.33 H₂O ( 3 ) and CH₃C?CSO₃H?1.88 H₂O ( 4 ). These acids were reacted with guanidinium carbonate to yield [⁺C(NH₂)₃][HC?CSO₃^?] ( 5 ) and [⁺C(NH₂)₃][CH₃C?CSO₃^?] ( 6 ). Compounds 1 – 6 were characterized by spectroscopic methods, and the X‐ray crystal structures of the guanidinium salts were determined. The X‐ray results of 5 show that the guanidinium cations and organosulfonate anions associate into 1D ribbons through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions, whereas association of these ions in 6 is achieved through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) and ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) interactions. The ribbons in 5 associate into 2D sheets through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{3\hfill \atop 6\hfill}}}$ (12) rings, whereas those in 6 are connected through ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) and ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{4\hfill \atop 6\hfill}}}$ (14) rings. Compound 6 exhibits a single‐layer stacking motif similar to that found in guanidinium alkane‐ and arenesulfonates, that is, the alkynyl groups alternate orientation from one ribbon to the next. The stacking motif in 5 is also single‐layer, but due to interlayer hydrogen bonding between sulfonate anions, the alkynyl groups of each sheet all point to the same side of the sheet.     

Instant controlled pressure drop extraction of lavandin essential oils: Fundamentals and experimental studies

Détente Instantanée contrôlée (DIC), French for Instant Controlled Pressure Drop, was performed on laboratory apparatus as well as on a pilot plant for proving its feasibility, and identifying the optimized processing conditions and recognizing the energy consumption and the quantity of water used for such an operation. GC–MS and SPME analysis of the extracts and residue material were carried out to assess the extracts and solid residues. The lavandin essential oils obtained by using the new DIC extraction process was studied, modeled and quantitatively and qualitatively compared to the conventional hydrodistillation method. The most important differences between the two essential oils were reflected in the yields, with 4.25 as against 2.3 g EO/100 g of raw matter, and in the extraction time, with 480 s as against some hours for respectively the DIC and the hydrodistillation operations. These differences have been previewed through the fundamental analysis. They can normally explain the great decreasing of energy consumption to be 662 kWh/t of raw material. The amount of water to be added was about 42 kg water/t of raw material.     

Electrospinning fabrication and characterization of poly(vinyl alcohol)/montmorillonite/silver hybrid nanofibers for antibacterial applications

Poly(vinyl alcohol) (PVA)/montmorillonite clay (MMT)/silver (Ag) nanoparticles have been electrospun for fabricating PVA/MMT/Ag nanofiber in aqueous solutions. Since PVA is a water-soluble and biocompatible polymer, it is one of the best materials for preparation of antibacterial nanofiber. MMT has been used as an inorganic filler to enhance properties of homopolymeric nanofiber. The PVA/MMT/Ag nanofiber diameter increases with increasing contents of MMT clay and Ag nanoparticles. In preservation test, the PVA/MMT/Ag nanofiber confirms an excellent antibacterial performance, elucidating for practical uses as a new preservative. Moreover, the PVA/MMT/Ag nanofiber shows improved thermal properties.     

Comparison of the adsorption orientation for 2-mercaptobenzothiazole and 2-mercaptobenzoxazole by SERS spectroscopy

In this study, the adsorption orientation for 2-mercaptobenzothiazole (MBT) and 2-mercaptobenzoxazole (MBO) on to silver mirror and silver sol substrates have been studied by surface enhanced Raman scattering (SERS). The MBT and MBO were chemisorbed on both silver mirror and silver sol after deprotonation with a tilted orientation to the silver surfaces. The surface enhanced properties of MBT and MBO showed that the substrate of silver mirror was superior to the sliver sol. The SERS spectra of MBT and MBO revealed that both of the MBT and MBO were adsorbed on silver surfaces strongly by a common sulfur molecule and a sulfur atom from MBT and an oxygen atom from MBO. Therefore, the adsorption orientation of MBT and MBO was little tilted perpendicularly to the silver surfaces. The adsorption geometry did not undergo any significant changes in acidic and basic solutions. It showed that the adsorption orientation for MBT and MBO were stable in the both solutions.     

Field induced formation of mesoscopic polymer chains from functional ferromagnetic colloids

The assembly and direct imaging of ferromagnetic nanoparticles into one-dimensional mesostructures (1-D) are reported. Polymer-coated ferromagnetic colloids (19 nm, 24 nm) were assembled at a crosslinkable oil-water interface under both magnetic field induced and zero-field conditions and permanently fixed into 1-D mesoscopic polymer chains (1-9 mum) in a process referred to as Fossilized Liquid Assembly (FLA). In the FLA process, nanoparticle chains were fixed at the oil interface through photopolymerization, enabling direct visualization of organized mesostructures using atomic force microscopy. Using the FLA methodology, we systematically investigated different conditions and demonstrated that dispersed ferromagnetic colloids possess sufficient dipolar interactions to organize into mesoscopic assemblies. Application of an external magnetic field during assembly enabled the formation of micron-sized chains which were aligned in the direction of the applied field. This universal methodology is an attractive alternative technique to cryogenic transmission electron microscopy (cryo-TEM) for the visualization of nanoparticle assembly in dispersed organic media.     

CuSO<Subscript>4</Subscript> as a Mild,Green, and Efficient Catalyst for the One-pot Conversion of <Emphasis Type="Italic">THP</Emphasis> Ethers to Acetates

Summary. An efficient direct conversion of THP ethers into the corresponding acetates was achieved with acetic anhydride in the presence of CuSO₄ · 5H₂O as an available and green catalyst in high yields.     

Ab Initio and DFT Studies on CO2 Interacting with Znq+–Imidazole (q=0, 1, 2) Complexes: Prediction of Charge Transfer through σ‐ or π‐Type Models

Using first‐principles methodologies, the equilibrium structures and the relative stability of CO₂@[Zn^q+Im] (where q=0, 1, 2; Im=imidazole) complexes are studied to understand the nature of the interactions between the CO₂ and Zn^q+–imidazole entities. These complexes are considered as prototype models mimicking the interactions of CO₂ with these subunits of zeolitic imidazolate frameworks or Zn enzymes. These computations are performed using both ab initio calculations and density functional theory. Dispersion effects accounting for long‐range interactions are considered. Solvent (water) effects were also considered using a polarizable continuum model approach. Natural bond orbital, charge, frontier orbital and vibrational analyses clearly reveal the occurrence of charge transfer through covalent and noncovalent interactions. Moreover, it is found that CO₂ can adsorb through more favorable π‐type stacking as well as σ‐type hydrogen‐bonding interactions. The inter‐monomer interaction potentials show a significant anisotropy that might induce CO₂ orientation and site‐selectivity effects in porous materials and in active sites of Zn enzymes. Hence, this study provides valuable information about how CO₂ adsorption takes place at the microscopic level within zeolitic imidazolate frameworks and biomolecules. These findings might help in understanding the role of such complexes in chemistry, biology and material science for further development of new materials and industrial applications.     

Anisotropic Lithium Ion Conductivity in Single‐Ion Diblock Copolymer Electrolyte Thin Films

Well‐defined single‐ion diblock copolymers consisting of a Li‐ion conductive poly(styrenesulfonyllithium(trifluoromethylsulfonyl)imide) (PSLiTFSI) block associated with a glassy polystyrene (PS) block have been synthesized via reversible addition fragmentation chain transfer polymerization. Conductivity anisotropy ratio up to 1000 has been achieved from PS‐b‐PSLiTFSI thin films by comparing Li‐ion conductivities of out‐of‐plane (aligned) and in‐plane (antialigned) cylinder morphologies at 40 °C. Blending of PS‐b‐PSLiTFSI thin films with poly(ethylene oxide) homopolymer (hPEO) enables a substantial improvement of Li‐ion transport within aligned cylindrical domains, since hPEO, preferentially located in PSLiTFSI domains, is an excellent lithium‐solvating material. Results are also compared with unblended and blended PSLiTFSI homopolymer (hPSLiTFSI) homologues, which reveals that ionic conductivity is improved when thin films are nanostructured.