Development of analytical procedures for trace-level determination of polybrominated diphenyl ethers and tetrabromobisphenol A in river water and sediment

The aim of this work was to develop procedures for the simultaneous determination of selected brominated flame retardants (BFRs) in river water and in river bed sediment. The target analytes were polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA). To determine dissolved BFRs, a novel mixed-mode solid-phase extraction procedure was developed by combining a hydrophobic sorbent (C₁₈) with a silica-based anion exchange sorbent, so as to overcome the negative artefact induced by dissolved organic carbon. Extraction recoveries exceeded 73% for most analytes, except for BDE-183 and BDE-209 (57%). As regards suspended sediment and river bed sediment, extraction was carried out by means of ultrasonication (recoveries: 73–94%). These procedures, combined to gas chromatography coupled to negative chemical ionisation mass spectrometry (GC-NCI-MS), enabled the determination of BFRs at trace level: 3-160 pg L⁻¹ in river water, 5–145 pg g⁻¹ in bed sediment. These methods were applied to the determination of PBDEs and TBBPA in a suburban river (near Paris, France). PBDEs were systematically detected in the water column (ΣBDEs, 2,300–4,300 pg L⁻¹); they partitioned between the dissolved and particulate phases and BDE-209 was the dominant congener, followed by BDE-99 and BDE-47. TBBPA was detected in the dissolved phase only (<35–68 pg L⁻¹). All selected BFRs were ubiquitous in bed sediments and levels ranged from 3,100 to 15,100 pg g⁻¹ and from 70 to 280 pg g⁻¹ (dry weight), for ΣBDEs and TBBPA, respectively.     

Transport properties of alternative fuel microemulsions based on sugar surfactant

Electrical conductivity of fuel microemulsion composed of diesel, pentanol, water, and sucrose laurate as surfactant was investigated over a wide range of water contents varying from 0 to 90?wt% and temperature varying from 10°C to 50°C. Conductivity measurements were performed on samples, the composition of which lie along the one-phase channel using a conductivity meter. Activation energy of conduction flow was evaluated. The hydrodynamic radius as a function of temperature in the aqueous phase-rich region (90?wt%) was measured using the dynamic light scattering (DLS) method. The microstructure of the microemulsion was further investigated by NMR diffusometry by which the self-diffusion coefficients for water were determined at 25°C. Electrical conductivity increases with water content up to 40?wt% and the percolation threshold was observed, and then stabilizes between 40 and 80?wt% then decreases. Percolation threshold temperature at constant composition was monitored as 36°C for water contents below 80?wt% and as 34°C for water contents above that. As predicted by the conductivity measurements, the determined self-diffusion coefficients of water confirmed the structural transition from discrete W/O droplets to bi-continuous phase and finally to O/W droplet microemulsion.     

Mild and Soft Catalyzed Trifluoromethylthiolation of Boronic Acids: The Crucial Role of Water

The most reactive 2nd generation of trifluoromethanesulfenamides undergoes a copper‐catalyzed cross‐coupling reaction with boronic acids to afford CF₃S‐molecules. Contrary to the previous methods in the literature, no base addition, no heating, and no large excess of reagents are required to obtain good results. Furthermore, a crucial role of a small amount of water to favor this reaction has been demonstrated. This constitutes the mildest described conditions for such a reaction.     

Microemulsion Phase Behavior of Aerosol-OT Combined with a Cationic Hydrotrope in the Dilute Region

The phase behavior of systems containing minimum amounts of sodium bis (2-ethylhexyl) sulfosuccinate with equimolar ratio of tetra ethyl ammonium chloride were studied as a function of salt concentration and alkane carbon number at ambient temperature. Visual inspection as well as cross polarizers were used to detect anisotropy. Solubilization ratios for oil and brine in the middle phases were measured and used to calculate the interfacial tension. Ultra-low interfacial tension values were predicted for the systems containing heptane, octane and nonane as model oil. Different phase behavior was observed for systems with higher alkane number.     

BD entropy and Bernis–Friedman entropy

In this note, we propose in the full generality a link between the BD entropy introduced by D. Bresch and B. Desjardins for the viscous shallow-water equations and the Bernis–Friedman (called BF) dissipative entropy introduced to study the lubrication equations. Different dissipative entropies are obtained playing with the drag terms on the viscous shallow-water equations. It helps for instance to prove the global existence of nonnegative weak solutions to the lubrication equations starting from the global existence of nonnegative weak solutions to appropriate viscous shallow-water equations.     

Speciation of Fe(II) and Fe(III) effect on CaCO3 crystallization

The present work was carried out to investigate separately the effect of Fe²⁺ and Fe³⁺ on the precipitation kinetics and the microstructure of CaCO₃. For this an experimental procedure was proposed. Precipitation tests were made by using the dissolved‐CO₂ degassing method. Both air and nitrogen were employed to strip the CO₂ from a Ca(HCO₃)₂ solution initially rich in this gas. At anoxic medium, it was shown that iron (II) prolongs the nucleation step and decelerates the crystalline growth rate. X‐ray diffraction analysis shows that its presence inhibits calcite and promotes aragonite variety. By using air, the reaction medium is rich in oxygen and iron (II) is rapidly oxidized. Seeing the higher solution pH (> 6.5), iron hydroxide forms before the onset of CaCO₃ precipitation and plays a role of seed permitting to initiate CaCO₃ nucleation. So, contrary to the observed effect of iron (II), the presence of iron (III) accelerates the precipitation rate of CaCO₃. As for iron (II), iron (III) inhibits calcite formation but favored the vaterite variety instead of the aragonite one.     

Regioselective Ruthenium‐Catalyzed Carbonylative Direct Arylation of Five‐Membered and Condensed Heterocycles

A ruthenium‐catalyzed carbonylative C?H bond arylation process for the three‐component synthesis of complex aryl–(hetero)aryl ketones in an aqueous solution has been developed. By exploiting the ortho‐activating effect of nitrogen‐containing directing groups, a regioselective, successive twofold C(sp²)?C(sp²) bond formation has been achieved. This straightforward catalytic process provides access to versatile products prevalent in multiple bioactive compounds and supplies a valuable functional group for subsequent transformations.     

Influence of tempereature on Struvite precipitation by CO2‐deagassing method

The present study explores struvite precipitation by degassing method under different temperature (14.5‐35 °C). It is shown that an increase of temperature does not affect the nucleation kinetics but strongly influences the growth rate and the efficiency of the phosphate removal. This was attributed to the effect of temperature on the struvite solubility and then the reached supersaturation coefficient. It was also shown, by using degassing method, that the determined solubility constant (pK_s) values of struvite, at 14.5, 20, 25 and 35 °C are 13.00, 12.82, 12.63 and 13.20, respectively, are close to those presented in the literature. The results show that temperature influences the kinetics of precipitation. First‐order kinetics were found to be sufficient to describe the rate data. The rates decreased with increasing temperature and the apparent rate constants for the reaction were determined. Arrhenius plots yielded a relatively apparent high activation energy E_a = 31.0 kJ·mol^–1. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electrochemical impedance probing of DNA hybridisation on oligonucleotide-functionalised polypyrrole

We report a new approach for detecting DNA hybridisation using non faradaic electrochemical impedance spectroscopy. The technique was applied to a system of DNA probes bearing amine groups that are immobilized by covalent grafting on a supporting polypyrrole matrix functionalised with activated ester groups.The kinetics of the attachment of the ss-DNA probe was monitored using the temporal evolution of the open circuit potential (OCP). This measurement allows the determination of the time necessary for the chemical reaction of ss-DNA probe into the polypyrrole backbone.The hybridisation reactions with the DNA complementary target and non complementary target were investigated by non faradaic electrochemical impedance spectroscopy. Results show a significant modification in the Nyquist plot upon addition of the complementary target whereas, in presence of the non complementary target, the Nyquist plot is not modified. The spectra, in the form of Nyquist plot, were analysed with the Randles circuit. The transfer charge resistance R₂ shows a linear variation versus the complementary target concentration. Sensitivity and detection limit (0.2 nM) were determined and detection limit was lower of one order of magnitude than that obtained with the same system and measuring variation of the oxidation current at constant potential.