A numerical method for soluble surfactants on moving interfaces

We present a numerical method modeling soluble surfactants on deforming interfaces. The method uses an explicit Eulerian discretization of the interface allowing the use of standard finite difference schemes to solve coupled time-dependent differential equations for the concentration of surfactant on the interface and for the concentration of surfactant in the bulk. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ultrasonic determination of electron-phonon scattering rates in copper

Electron-phonon scattering rates in ultrapure single crystals of copper have been determined from the temperature dependence of the magnetoacoustic oscillation amplitudes for various orbits on the Fermi surface using both longitudinal and transverse waves. The central belly orbit seattering rate is found to be (6.0±0.3)×10⁶ T ³ sec^–1. Additionally, a rate of (2.9±0.2)×10⁶ T ³ sec^–1 is found which is attributed to belly orbits displaced from the zone center by about 1.25/a ₀, wherea ₀ is the lattice constant. Geometric oscillations associated with the [111]—directed open orbit are observed at low fields forq [113] and the rate for this orbit is found to be (4.8±0.3)×10⁶ T ³ sec^–1. Geometric oscillations for the dog's bone and neck orbits are observable but rates for these orbits are believed to be unreliable. Our measured rates are compared with those of other workers.     

Prediction of low-sensitivity reactive dye recipe in exhaust dyeing influenced by material to liquor ratio and nature of salt

Reactive dyeings were carried out by exhaust method on 100% cotton knits. A trichromatic combination was chosen with only change in blue component. Colorimetric data were produced under controlled dyeing conditions by comparing the color difference between the target shade and resulting shades. Giving a change in liquor ratio and nature of salt the colorimetric data were regenerated again produced the shades. The data will be helpful to predict the low-sensitivity reactive dye recipe, which lead to the concept of right-first-time dyeing. The aim of this research is to help a dyer to select the right recipe. A set of the dye recipes was applied by dyeing with reactive dyes on cotton. Sodium chloride shows best results in terms of dye sensitivity as compared to Glauber's salt at low liquor ratio that is 1:10. Blue BRF in combination with yellow and red shows best result as compared to navy blue BF.     

Characterization of Dominant Hydrogen Bonded Complex Structures of Dielectric Polarization and Viscous Flow Processes in Glycerol–Formamide Binary Mixtures

The static permittivity and viscosity of glycerol–formamide (Gly–FA) binary mixtures were measured at eleven concentrations over the entire composition range and at temperatures T=288.15, 303.15, 318.15 and 333.15 K. The excess static permittivity and excess viscosity of the mixtures were determined using the mole-fraction additive mixture law. Results indicated that the molecular dielectric polarization in Gly–FA mixtures is governed by 1:1 complexes with a decrease in number of H-bonded parallel aligned dipolar ordering at all of the investigated temperatures. The 2Gly:FA complexes facilitate the viscous flow process and the number of these complexes decreases with increasing temperature. The apparent activation energy of viscous flow, determined from Arrhenius plots, increases with increases of the Gly concentration in the mixtures. The electric-field-induced increment of the Helmholtz free energy and the entropy of these binary mixtures were determined from the temperature dependence of the static permittivity and its derivative, respectively.     

Synthesis of Some New 2-(4-Methoxybenzothiazol-2′-yl amino)-4-(2-chloro-4-trifluoromethylanilino)-6-(substituted thioureido)-1,3,5-triazine as Antifungal Agents

2,4,6-Trichloro 1,3,5-triazine was selectively reacted with new nucleophilic reagents such as 4-methoxy-2-aminobenzothiazole, 2-chloro-4-trifluoromethyl-aniline, and phenylsubstituted thiourea in alkaline medium to give 2-(4-methoxybenzothiazol-2′-ylamino)-4-(phenylthioureido)-6-(substitutedthioureido)-1,3,5-triazines. The structures of these compounds were confirmed by IR, ¹H NMR, ¹⁹F NMR, mass spectral data, and elemental analysis. The compounds show fungicidal activity against Alternaria alternata, Aspergillus niger, and Macrofomina.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Hydrothermal Deoxygenation of Graphene Oxide: Chemical and Structural Evolution

A green and facile approach for the partial deoxygenation of graphene oxide (GO) at moderate temperature (100 °C) and under atmospheric pressure, catalyzed by acidic conditions in water is reported. The chemical and structural changes in GO as a function of hydrothermal time were probed to understand the deoxygenation events. The brown GO dispersion in water was found to gradually turn black over the hydrothermal‐treatment time on account of the increasing graphitic content. FTIR, thermogravimetric (TG), Raman, and XRD analyses revealed that the labile oxygen functionalities are progressively eliminated, thereby partially restoring the π‐conjugated network. This was further corroborated by X‐ray photoelectron spectroscopy (XPS) studies based on quantitative analysis of each carbon component associated with the different chemical functionalities. Carbonyl, carboxyl, ether, and phenolic groups were found to be thermally stable, which hinders complete deoxygenation of GO and makes their dispersion in water stable, as monitored by the ζ potential. It is worth noting that deoxygenation events are expedited under acid‐catalyzed hydrothermal treatment relative to thermal deoxygenation in air.     

Microindentation Hardness of Nanostructured Thermoplastic Materials

Summary: The micromechanical behaviour of various thermoplastics based nanocomposites was investigated with the aid of the microindentation technique. The materials studied were microphase separated styrene-butadiene block copolymer systems and several thermoplastics reinforced with nano-sized fillers having variable dimensionality. It was found that the microhardness behaviour of the nanocomposites studied was strongly influenced by the dimensionalities of the filler. Due to large surface to volume-ratio one- and two-dimensional fillers exhibit a far better reinforcing behaviour than the three dimensional ones. In case of nanostructured block copolymers, the microhardness is not determined by the total polystyrene (PS)/polybutadiene (PB) composition alone but diminishes gradually in presence of freely standing dangling polybutadiene chains even if the morphology of the systems remains unaltered.     

An isocratic reversed-phase high-performance liquid chromatographic method for the simultaneous determination of benzoyl peroxide and the related compounds benzoic acid, benzaldehyde, ethyl benzoate, methylparaben, and propylparaben in dermal preparations

A reversed-phase high-performance liquid chromatographic method was developed for the simultaneous determination of benzoyl peroxide and the related compounds benzoic acid (BA), methylparaben, benzaldehyde, propylparaben, and ethyl benzoate. The compounds are separated on a column containing octadecyl silane chemically bonded to porous silica particles. The mobile phase is acetonitrile-buffer (45 + 55, v/v). Solutions are injected into the chromatographic system under isocratic conditions at a constant flow rate of 1.5 mL/min with UV detection at 235 nm. Analysis of stability samples showed rapid accumulation of BA by thermal degradation. A rationale has been established for the acceptable limit of BA in the formulation, which already contains BA (0.2%) as a preservative. The proposed method is efficient and determines the active compound and 5 related compounds in a run time of 20 min. The method was validated according to the guidelines of the International Conference on Harmonization and demonstrated good agreement with the validation requirements.     

Comprehensive comparison of various techniques for the analysis of elemental distributions in thin films

The present work shows results on elemental distribution analyses in Cu(In,Ga)Se2 thin films for solar cells performed by use of wavelength-dispersive and energy-dispersive X-ray spectrometry (EDX) in a scanning electron microscope, EDX in a transmission electron microscope, X-ray photoelectron, angle-dependent soft X-ray emission, secondary ion-mass (SIMS), time-of-flight SIMS, sputtered neutral mass, glow-discharge optical emission and glow-discharge mass, Auger electron, and Rutherford backscattering spectrometry, by use of scanning Auger electron microscopy, Raman depth profiling, and Raman mapping, as well as by use of elastic recoil detection analysis, grazing-incidence X-ray and electron backscatter diffraction, and grazing-incidence X-ray fluorescence analysis. The Cu(In,Ga)Se2 thin films used for the present comparison were produced during the same identical deposition run and exhibit thicknesses of about 2 μm. The analysis techniques were compared with respect to their spatial and depth resolutions, measuring speeds, availabilities, and detection limits.