Cyclometalated rhodium(III) complex with phen-dione ligand

The novel cyclometalated Rh(III) complex, [Rh(phpy-κ²N,C^2′)₂(phen-dione)]PF₆, where phpy-κ²N,C^2′ is pyridine-2-yl-2-phenyl and phen-dione is 1,10-phenanthroline-5,6-dione has been prepared and characterized by elemental analysis, IR, ¹H NMR, and electronic absorption spectroscopies, cyclic voltammetry, and X-ray crystallography. The crystal structure of [Rh(phpy-κ²N,C^2′)₂(phen-dione)]PF₆·CH₃CN shows that the coordination geometry around the Rh(III) is a distorted octahedron, with bite angles of 76.13°-81.09° for all three bidentate ligands.     

Mononuclear Co(III) and Ni(II) Complexes with Polypyridyl Ligands, [Co(phen)2(taptp)]3+ and [Ni(phen)2(taptp)]2+: Synthesis, Photocleavage and DNA-binding

Two novel, mixed ligand complexes of cobalt(III) and nickel(II), [Co(phen)₂(taptp)]³⁺ (1) and [Ni(phen)₂(taptp)]²⁺ (2) (phen = 1,10-phenanthroline and taptp = 4,5,9,18-tetraazaphenanthreno [9,10-b]triphenylene), were synthesized and characterized by elemental analyses, UV-visible and NMR spectroscopies. The binding interactions of the two complexes with DNA have been investigated using absorption and emission spectroscopy methods and electrophoresis measurement mode. The intrinsic binding constants for these complexes to DNA are in the order of 10⁵. In Tris buffer, the Co(III) complex shows a moderate luminescence which was enhanced after binding to DNA. However for complex Ni(II), no emission was observed in Tris buffer. The [Co(phen)₂(taptp)]³⁺ and [Ni(phen)₂(taptp)]²⁺ can cause the photocleavage of DNA supercoiled pBR322 upon irradiation by 360 nm light. Based on the data, an intercalative mode of DNA binding is suggested for the two complexes.     

Batch and flow measurement of hydrogen ions in highly acidic media using 2-(4-methoxy phenyl) 6-(4-nitrophenyl)-4-phenyl-1,3-diazabicyclo [3.1.0] hex-3-ene as an H-selective ionophore

A hydrogen ion-selective poly(vinyl chloride) (PVC) membrane electrode was developed using 2-(4-methoxy phenyl) 6-(4-nitrophenyl)-4-phenyl-1,3-diazabicyclo [3.1.0] hex-3-ene as ionophore. Effects of experimental parameters such as membrane composition, nature and amount of plasticizer, and the amount of additive on the potential response of pH sensor were investigated. This H⁺-selective membrane electrode gave a linear response over the pH range 0-4 (10⁻⁴ to 1 mol L⁻¹ HCl) with slope of 57.4 ± 0.3 mV pH⁻¹ and limit of detection 6.3 × 10⁻⁵ mol L⁻¹ at 20 °C. Also, hydrofluoric acid did not influence the surface of this electrode and thus it was maintained without showing any changes in potentials after being used in a hydrofluoric acid solution. The equilibrium water content of the electrode was determined in the presence of two different plasticizers as membrane solvent. The alkaline cation binding affinity of ionophore was very low that prove these cations do not have specific interaction with this ionophore. The electrode had fairly low electrical resistance, good potential stability and reproducibility. It has a rapid potential response to changes of pH (10 s), easily used in a single channel wall-jet flow injection system with good reproducibility (RSD% = 1.67%) and high reversibility. It was used as indicator electrode in potentiometric determination of pH in real samples.     

ZnO nanoparticle-modified ionic liquid-carbon paste electrodefor voltammetric determination of folic acid in food and pharmaceutical samples

In this work, a ZnO/nanoparticles (NPs) modified carbon ionic liquid paste electrode (ZnO/NP/CILPE) was fabricated and used to investigate the electrochemical behavior of folic acid. ZnO/NP/CILPE was prepared by mixing hydrophilic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([C₄mim]-[PF₆])), ZnO/NPs, graphite powder, and liquid paraffin together. The fabricated ZnO/NP/CILPE showed great electrocatalytic ability to the oxidation of folic acid, and an irreversible oxidation peak appeared at 0.75 V (vs. Ag/AgCl) with improved peak current. Under the optimized conditions of pH 9.0, the plot of peak current vs. folic acid concentration consisted of two linear segments with slopes of 1.776and 0.033 μA/μM in the concentration ranges of 0.05–1.5 μM and 1.5–550.0 μM, respectively. The detection limit was 0.01 μM (3σ). The proposed sensor was successfully applied for the determination of folic acid in fortified food and pharmaceutical samples.     

Synthesis, structure and spectroscopic study of Rh polypyridine complexes with phenylcyanamide derivative ligands

Several new Rh^III complexes, [Rh(tpy)(bpy)L](PF₆)₂ (tpy=2,2′:6′,2″-terpyridine, bpy=2,2′-bipyridine, and L=monoanions of phenylcyanamide(pcyd)), 4-methylphenylcyanamide (4-MePcyd), 2,4-dimethylphenylcyanamide (2,4-Me₂pcyd), 4-methoxyphenylcyanamide (4-MeOPcyd), 2-chlorophenylcyanamide (2-Clpcyd) and 2,5-dichlorophenylcyanamide (2,5-Cl₂pcyd) have been synthesized and characterized by elemental analysis, IR, ¹H NMR and electronic absorption spectroscopies. ORTEP drawing of [Rh(tpy)(bpy)(2,5-Cl₂pcyd)](PF₆)₂·1/2CH₃CN shows three pyridyl rings of the tpy ligand that are nearly coplanar, as are the two rings of bpy. The anionic cyanamide group is coordinated end-on by the nitrile nitrogen to the Rh^III. The Rh^III–NCN bond is bent, having an angle of 125.4°. This bent bond is largely determined by the σ-bonding interaction of a cyanamide non-bonding electron pair in a sp² hybrid orbital.     

The mononuclear ruthenium(III)-2,3,5,6-tetrakis(2-pyridyl)pyrazine complex [Ru(bpy)(tppz)Cl][PF<Subscript>6</Subscript>]<Subscript>2</Subscript>: synthesis,crystal structure,electrochemical, and spectroelectrochemical studies

The mononuclear Ru(III) complex, [Ru(bpy)(tppz)Cl][PF₆]₂.acetylacetone, where tppz is 2,3,5,6-tetrakis(2-pyridyl)pyrazine and bpy is 2,2′-bipyridine, has been prepared and characterized by physicochemical and spectroscopic methods, cyclic voltammetry, and single crystal X-ray structure analysis. The coordination around the Ru(III) center is distorted octahedral, with bite angles of 80.70–161.83° for the chelating bpy and tppz ligands. The two pyridyl rings of the bpy ligand are nearly coplanar. UV–vis spectroelectrochemical studies of this complex in acetonitrile showed a reversible redox behavior evaluated by the maintenance of isosbestic points in the UV–vis spectrum for both forward reduction and reverse oxidation processes. Magnetic susceptibility data derived from paramagnetic NMR data revealed an effective magnetic moment of 1.79 BM at room temperature.     

Synthesis of 1‐(Cyclohexylamino)‐2‐(aryl)pyrrolo[1,2‐a]quinoline‐3‐carbonitrile Derivatives Using a Mild,Four‐Component Reaction

1‐(Cyclohexylamino)‐2‐(aryl)pyrrolo[1,2‐a]quinoline‐3‐carbonitrile derivatives were synthesized in an efficient method from four‐component condensation reaction between cyclohexyl isocyanide, quinoline, malononitrile, and aromatic aldehydes in the presence of a catalytic amount of titanium dioxide (TiO₂) in CH₂Cl₂ at ambient temperature in good yields. Silica gel column chromatography was employed for HCN elimination and then 1, 3 hydrogen shift was led to form final products 5a , 5b , 5c , 5d , 5e .