Preparation of macromonomers by copolymerization of methyl acrylate dimer involving β fragmentation

The unsaturated dimer of methyl acrylate [CH₂C(CO₂CH₃)CH₂CH₂CO₂CH₃, or MAD] was copolymerized with various monomers to prepare copolymers bearing the ω-unsaturated end group [CH₂C(CO₂CH₃)CH₂ ] arising from β fragmentation of the MAD propagating radical. Copolymerizations of MAD with cyclohexyl and n-butyl acrylate resulted in copolymers with ω-unsaturated end groups, and increasing the temperature up to 180 °C resulted in an increase in the rate of β fragmentation of MAD radicals relative to propagation. Only a small amount of unsaturated end groups was introduced by copolymerization with ethyl methacrylate (EMA), and the EMA content in the copolymer increased with temperature. These findings could be explained by the reversible addition of the poly(EMA) radical to MAD. The copolymerization with ethyl α-ethyl acrylate (EEA) did yield a copolymer containing unsaturated end groups with MAD units as part of the main chain, although the steric hindrance of the ethyl group suppressed homopropagation and crosspropagation of EEA, resulting in low polymerization rates. Therefore, the copolymerization of MAD with acrylic esters at high temperatures was noted as a convenient route for obtaining acrylate–MAD copolymers bearing unsaturated end groups at the ω end (macromonomer). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 597–607, 2004     

Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

Radiolytic unsaturation decay in polyethylene. Part III—the effect of certain chain transfer agents

Small amounts of certain halogenated compounds are found to have, at most, only a slight enhancing effect on the radiolytic decay rates of added poly-unsaturated compounds in polyethylene, but significantly increase the elastic modulus at 433 K (melt modulus) obtained thereby. Experiments with model chlorine-containing additives suggest that this increase is due to a more random distribution of polymer and monomer mediated crosslinks in the polymer, that it does not result from a significant increase in crosslinking and that it is mediated by chlorine atoms, in a similar manner to radiolytic hydrogen atoms, through facilitation of long range free radical migration. Although low molecular weight chloro-paraffins inhibit radiolytically induced growth of melt modulus in monomer containing polyethylenes, even very small additions of chlorinated polyethylenes, which form a separate phase, increase the melt modulus. This again indicates that the active species is the chlorine radical.     

Determination of nickel in alloys and plant leaves with salicylaldehyde 3-oxobutanoylhydrazone by spectrophotometry.

A simple and highly sensitive reagent of salicylaldehyde 3-oxobutanoylhydrazone (salicylaldehyde acetoacetic acid hydrazone, SAAH) was synthesized and studied for the spectrophotometric determination of nickel in detail. In the pH range 6, which greatly increased the selectivity, nickel reacted with SAAH to form a 1:1 yellow complex, having a sensitive absorption peak at 405 nm. Under the optimal conditions, Beer's law was obeyed over the range from 0.0117 to 0.1174 microg cm(-3). The apparent molar absorptivity was 3.025 x 10(5) dm3 mol(-1) cm(-1). The detection limit and the variation coefficient were found to be 1.752 ng cm(-3) and 1.0%, respectively. The method has been applied to the quantitative determination of nickel in different alloys and leaves.     

Dynamic surface tension measurements of surfactant solutions using the maximum bubble pressure method – limits of applicability

One of the essential differences in the design of bubble pressure tensiometers consists in the geometry of the measuring capillaries. To reach extremely short adsorption times of milliseconds and below, the so-called deadtime of the capillaries must be of the order of some 10 ms. In particular, for concentrated surfactant solutions, such as micellar solutions, short deadtimes are needed to minimize the initial surfactant load of the generated bubbles. A theoretical model is derived and confirmed by experiments performed for a wide range of experimental conditions, mainly in respect to variations in deadtime and bubble volume.     

Plasticized microporous poly(vinylidene fluoride) separators for lithium‐ion batteries. II. Poly(vinylidene fluoride) dense membrane swelling behavior in a liquid electrolyte—characterization of the swelling kinetics

Some microporous poly(vinylidene fluoride) (PVdF) separators for lithium‐ion batteries, used in liquid organic electrolytes based on a mixture of carbonate solvents and lithium salt LiPF₆, were characterized by the study of the swelling phenomena on dense PVdF membranes. Various aspects of the kinetics of the carbonate solvents and the solvent mixture sorption in dense PVdF slabs were studied at different temperatures. Non‐Fickian behavior, characterized by S‐shaped sorption curves, was highlighted, and a salt effect, which resulted in two‐stage sorption, was studied. Diffusion coefficients and activation energies were calculated for the Fickian portions of the sorption curves, that is, at short times and low swelling ratios. A strong influence of the different interaction parameters was shown for the swelling kinetics. This study proved that the swelling of microporous PVdF membranes could be considered instantaneous. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 544–552, 2004     

Extractive spectrophotometric determination of Cobalt(II) in synthetic and pharmaceutical samples using Cyanex 923.

Cyanex 923 has been proposed as a sensitive analytical reagent for the direct extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a blue-colored complex with Cyanex 923 in the organic phase. The maximum absorbance of the complex is measured at 635 nm. Beer's law was obeyed in the range 58.9 - 589.0 microg of cobalt. The molar absorptivitiy and Sandell's sensitivity of the complex was calculated to be 6.79 x 10920 l mol(-1) cm(-1) and 0.088 microg cm(-2), respectively. The nature of the extracted species was found to be Co(SCN)2 x 2S. An excellent linearity with a correlation coefficient value of 0.999 was obtained for the Co(II)-Cyanex 923 complex. Stability and regeneration of the reagent (Cyanex 923) for reuse is the main advantage of the present method. The method was successfully applied to the determination of cobalt in synthetic mixtures and pharmaceutical samples was found to give values close to the actual ones. Standard alloy samples, such as high-speed tool BCS 484 and 485, have been tested for the determination of cobalt for the purpose of validating the present method. The results of the proposed method are comparable with atomic absorption spectrometry and were found to be in good agreement.     

Crystal structure of the 4-chromanone derivative.

The title compound was extracted from a natural product and its structure was characterized by an X-ray diffraction method. It crystallizes in the tetragonal space group P41 with cell parameters a = 15.832(10)A, c = 11.622(10)A, Z = 4; the final residual factor is R1 = 0.0769. The structure has both intra and intermolecular hydrogen bonds.     

A sequential injection system for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples.

A sequential injection methodology for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples is proposed. A single manifold is used for the determination of the three analytes, and the same protocol sequence allows the sequential determination of calcium and magnesium (the sum corresponds to the water hardness). The determination of both metals is based on their reaction with cresolphtalein complexone; mutual interference is minimized by using 8-hydroxyquinoline for the determination of calcium and ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) for the determination of magnesium. Alkalinity determination is based on a reaction with acetic acid, and corresponding color change of Bromcresol Green. Working ranges of 0.5 - 5 mg dm(-3) for Ca, 0.5 - 10 mg dm(-3) for Mg, and 10 - 100 mg HCO3- dm(-3), for alkalinity have been achieved. The results for water samples were comparable to those of the reference methods and to a certified reference water sample. RSDs lower than 5% were obtained, a low reagent consumption and a reduced volume of effluent have been accomplished. The determination rate for calcium and magnesium is 80 h(-1), corresponding to 40 h(-1) per element, while 65 determinations of alkalinity per hour could be carried out.     

Solid Lipid Nanoparticles (SLNs): Preparation and Properties of Calix[4]resorcinarene Derived Systems.

Solid Lipid Nanoparticles (SLNs) have been prepared fromc-2,c-8,c-14,c-20-tetraundecyl-4,6,10,12,16,18,22,24-octahydroxyresorc[4]areneas colloidal suspensions. Photon Correlation Spectroscopy studies revealed aparticle hydrodynamic diameter of 150 nm. Non-contact mode Atomic ForceMicroscopy allows observation of the particles as slightly flattened sphericalobjects of 236 (±40) nm diameter and 145 (±40) nm height. Thestudy of the preparation parameters showed that shear force does not affectthe hydrodynamic size of the SLNs. In contrast, the viscosity and the pH ofthe aqueous phase, the amphiphile concentration in the organic phase and thevolume of organic phase used, all lead to variation in the size of the particles.In term of post preparation parameters only the ionic strength has been shownto affect significantly the particle size; while the pH of the storing solution,microwave, ultrasonic and thermal treatments do not. Short and long-termstability studies have been performed to measure the effect of the ionic strengthon the stability of the particles. The use of carbohydrate cryoprotectants does notallow re-dispersion of the colloidal suspension after freeze-drying.