Characterization and properties of low-linear-density polyethylene/Typha latifolia composites

The characterization of the effects of different sizes and loadings of Typha latifolia on the tensile, thermal, and morphological properties of linear-low-density polyethylene (LLDPE)/T. latifolia composites were evaluated using tensile test, Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy analyses. Results indicated the tensile strength and elongation at break decreased as T. latifolia loading increased. However, T. latifolia fine size (fs) exhibited better tensile properties than coarse size at the same loading in the composite. T. latifolia (15%, fs) recorded higher thermal stability than LLDPE control and other T. latifolia loadings and sizes due to the strong interaction of T. latifolia (15%, fs) in LLDPE matrix as shown in morphology.     

Determination of haloacetic acids in water using layered double hydroxides as a sorbent in dispersive solid‐phase extraction followed by liquid chromatography with tandem mass spectrometry

In the present study, highly efficient and simple dispersive solid‐phase extraction procedure for the determination of haloacetic acids in water samples has been established. Three different types of layered double hydroxides were synthesized and used as a sorbent in dispersive solid‐phase extraction. Due to the interesting behavior of layered double hydroxides in an acidic medium (pH?4), the analyte elution step was not needed; the layered double hydroxides are simply dissolved in acid immediately after extraction to release the analytes which are then directly introduced into a liquid chromatography with tandem mass spectrometry system for analysis. Several dispersive solid‐phase extraction parameters were optimized to increase the extraction efficiency of haloacetic acids such as temperature, extraction time and pH. Under optimum conditions, good linearity was achieved over the concentration range of 0.05–100 μg/L with detection limits in the range of 0.006–0.05 μg/L. The relative standard deviations were 0.33–3.64% (n = 6). The proposed method was applied to different water samples collected from a drinking water plant to determine the concentrations of haloacetic acids.     

Simple and sensitive LC‐ESI‐MS method for the quantitation of sildenafil in plasma samples

Sildenafil is a selective inhibitor of phosphodiesterase type 5 enzyme. A simple and sensitive LC‐MS assay was developed to determine the concentration of sildenafil in human plasma. Sildenafil and omeprazole (internal standard) were extracted from the plasma with diethyl ether. The extract was evaporated under nitrogen and the residue was constituted with ACN and injected onto Novapak C₁₈ column (75×3.9 mm, 4 μm). The mobile phase consisted of 90% ACN plus 10% ammonium acetate (20 mM) containing 0.02% formic acid and was delivered isocratically at a flow rate of 0.2 mL/min. Sildenafil and omeprazole were monitored using a positive electrospray mode with single‐ion recording set at m/z 475 and 346, respectively, which are consistent with [M+H]⁺ molecular ions, and the run time was less than 5 min. The detection limit of sildenafil was 0.5 ng/mL, and the calibration curve was linear between 0.5 and 2000 ng/mL (R²>0.99). Within‐ and between‐day coefficients of variation were less than 7%. This method has been successfully used to measure sildenafil plasma concentrations in a beagle dog model following an oral administration of the drug.     

Enhancing endothelial differentiation of human mesenchymal stem cells by culture on a nanofibrous polycaprolactone/(poly-glycerol sebacate)/gelatin scaffold

Cardiovascular diseases have always been one of the main causes of death worldwide and eventually one of the major medical concerns. Tissue engineering is promising strategies of treating cardiovascular, which can be an effective approach with the design of appropriate scaffold. In this study, to develop engineering basement membrane for endothelial differentiation with good cell attachment, we produced polycaprolactone (PCL)/poly (glycerol sebacate) (PGS)/gelatin nanofibrous scaffold via electrospinning. Attenuated total reflectance-Fourier transform infrared and the proton nuclear magnetic resonance results confirmed the chemical structure of synthesized PGS. Scanning electron microscope images of the electrospun scaffold revealed that the nanofibers are smooth, continues and uniform. Moreover, due to the presence of hydrophilic functional groups in the scaffold, the contact angle is in the appropriate range for cell adhesion especially endothelial cells. The elastic modulus and ultimate tensile stress of electrospun scaffold were calculated 1.32 ± 0.27 MPa and 1.23 ± 0.18 MPa respectively. Quantitative polymerase chain reaction was performed for evaluation of endothelial differentiation of mesenchymal stem cells cultured on standard plate and fibrous scaffold under chemical stimulation with growth factor. Specific endothelial gene expression results postulated that our modified scaffold could support and significantly promote endothelial differentiation of MSCs.     

Mechanistic Insights into the Ameliorative Effect of Cichoriin on Diabetic Rats—Assisted with an In Silico Approach

Type 2 diabetes mellitus is considered to be a substantial socioeconomic burden worldwide on both patients and governments. Coumarins are biomolecules with a diversity of biological activities. The current investigation aimed to explore the ameliorative effects of cichoriin, which is a type of coumarin, on high-fat diet/streptozotocin (HFD/STZ)-induced diabetic rats. Methods: Rats were allocated into five groups. Group I was considered as the control group, while the other groups were HFD/STZ-induced diabetic rats. Group II was assigned as the diabetic control. Groups III and IV were treated with cichoriin (50 or 100 mg/kg, respectively). Group V received glibenclamide (5 mg/kg) (as a positive control). The blood glucose (BG), serum insulin, triglycerides (TG), total cholesterol (TC), total antioxidant capacity (TAC), catalase, hepatic superoxide dismutase (SOD) and content of malondialdehyde (MDA) were assessed. Histopathological and immunohistochemistry analysis of pancreatic tissue were performed. mRNA and protein expressions of GLUT4, AMPK, and PI3K were estimated. Results: Cichoriin treatment ameliorated HFD/STZ-induced diabetic conditions and mitigated the histopathological characteristics of the pancreas, as well as increasing pancreatic insulin expression. This decreased the levels of BG, TG, TC, and MDA and improved the TAC, catalase and SOD contents. Cichoriin demonstrated upregulation of mRNA and protein expressions of GLUT4, AMPK, and PI3K. The in silico binding of cichoriin with GLUT4, AMPK, and PI3K supported the possible current activities. Conclusion: Collectively, this work highlighted the potential role of cichoriin in mitigating HFD/STZ-induced diabetic conditions and showed it to be a valuable product.     

Structural characteristics and cyclic voltammetric behaviour of Sonogel-Carbon tyrosinase biosensors. A detailed comparative study of three immobilization matrixes

Structural characteristics an cyclic voltammetry of three amperommetric biosensors based on immobilization of tyrosinase on a Sonogel-Carbon electrode for detection of phenols are described. Cyclic voltammetry was applied to study the electrochemical behaviour of the electrode and the electrochemical reaction on the electrode surface. Scanning electron microscopy, X-ray energy dispersive spectroscopy and atomic force microscopy were used for the structure characterization of the electrode surface, enzyme film and polymers coatings. The influence of additive-protective polymers, such as polyethylene glycol and perfluorinated-Nafion ion-exchanger on the surface of the biosensor were explored.     

ITQ-15: the first ultralarge pore zeolite with a bi-directional pore system formed by intersecting 14- and 12-ring channels, and its catalytic implications

The pore topology of ITQ-15 zeolite consists of an ultra-large 14-ring channel that is intersected perpendicularly by a 12-ring pore; acid sites have been introduced in its framework and this unique structure shows advantages over unidirectional ultralarge pore zeolites for diffusing and reacting large molecules.     

An Accurate In Vitro Model of the E. coli Envelope

Gram‐negative bacteria are an increasingly serious source of antibiotic‐resistant infections, partly owing to their characteristic protective envelope. This complex, 20 nm thick barrier includes a highly impermeable, asymmetric bilayer outer membrane (OM), which plays a pivotal role in resisting antibacterial chemotherapy. Nevertheless, the OM molecular structure and its dynamics are poorly understood because the structure is difficult to recreate or study in vitro. The successful formation and characterization of a fully asymmetric model envelope using Langmuir–Blodgett and Langmuir–Schaefer methods is now reported. Neutron reflectivity and isotopic labeling confirmed the expected structure and asymmetry and showed that experiments with antibacterial proteins reproduced published in vivo behavior. By closely recreating natural OM behavior, this model provides a much needed robust system for antibiotic development.     

Identification,control strategies,and analytical approaches for the determination of potential genotoxic impurities in pharmaceuticals: A comprehensive review

Potential genotoxic impurities in pharmaceuticals at trace levels are of increasing concern to both pharmaceutical industries and regulatory agencies due to their possibility for human carcinogenesis. Molecular functional groups that render starting materials and synthetic intermediates as reactive building blocks for small molecules may also be responsible for their genotoxicity. Determination of these genotoxic impurities at trace levels requires highly sensitive and selective analytical methodologies, which poses tremendous challenges on analytical communities in pharmaceutical research and development. Experimental guidance for the analytical determination of some important classes of genotoxic impurities is still unavailable in the literature. Therefore, the present review explores the structural alerts of commonly encountered potential genotoxic impurities, draft guidance of various regulatory authorities in order to control the level of impurities in drug substances and to assess their toxicity. This review also describes the analytical considerations for the determination of potential genotoxic impurities at trace levels and finally few case studies are also discussed for the determination of some important classes of potential genotoxic impurities. It is the authors’ intention to provide a complete strategy that helps analytical scientists for the analysis of such potential genotoxic impurities in pharmaceuticals.     

Effect of radiation dose on the properties of natural rubber nanocomposite

Effect of radiation dose and carbon nanotubes (CNT) on the mechanical properties of standard Malaysian rubber (SMR) was investigated in this study. SMR nanocomposites containing 1–7 phr CNT were prepared using the solvent casting method and the nanocomposites were radiated at doses of 50–200 kGy. The change in mechanical properties, especially, tensile strength (Ts), elongation at break (Eb), hardness and tensile modulus at 100% elongation (M₁₀₀) were studied as a function of radiation dose. The structure and morphology of reinforced natural rubber was investigated by FESEM, TEM and AFM in order to gain further evidence on the radiation-induced crosslinking. It was found that the Ts, M₁₀₀ and the hardness of the SMR/CNT nanocomposites significantly increased with radiation dose; the elongation at break exhibited an increase up to 100 kGy, and a downward trend thereafter. Results on gel fraction further confirmed the crosslinking of SMR/CNT nanocomposites upon radiation.