Plant-Derived Antiviral Compounds as Potential Entry Inhibitors against Spike Protein of SARS-CoV-2 Wild-Type and Delta Variant: An Integrative in SilicoApproach

The wild-type SARS-CoV-2 has continuously evolved into several variants with increased transmissibility and virulence. The Delta variant which was initially identified in India created a devastating impact throughout the country during the second wave. While the efficacy of the existing vaccines against the latest SARS-CoV-2 variants remains unclear, extensive research is being carried out to develop potential antiviral drugs through approaches like in silico screening and drug-repurposing. This study aimed to conduct the docking-based virtual screening of 50 potential phytochemical compounds against a Spike glycoprotein of the wild-type and the Delta SARS-CoV-2 variant. Subsequently, molecular docking was performed for the five best compounds, such as Lupeol, Betulin, Hypericin, Corilagin, and Geraniin, along with synthetic controls. From the results obtained, it was evident that Lupeol exhibited a remarkable binding affinity towards the wild-type Spike protein (−8.54 kcal/mol), while Betulin showed significant binding interactions with the mutated Spike protein (−8.83 kcal/mol), respectively. The binding energy values of the selected plant compounds were slightly higher than that of the controls. Key hydrogen bonding and hydrophobic interactions of the resulting complexes were visualized, which explained their greater binding affinity against the target proteins—the Delta S protein of SARS-CoV-2, in particular. The lower RMSD, the RMSF values of the complexes and the ligands, Rg, H-bonds, and the binding free energies of the complexes together revealed the stability of the complexes and significant binding affinities of the ligands towards the target proteins. Our study suggests that Lupeol and Betulin could be considered as potential ligands for SARS-CoV-2 spike antagonists. Further experimental validations might provide new insights for the possible antiviral therapeutic interventions of the identified lead compounds and their analogs against COVID-19 infection.     

Synthesis,Characterization, and Assessment of Anti-Cancer Potential of ZnO Nanoparticles in an In Vitro Model of Breast Cancer

Advanced innovations for combating variants of aggressive breast cancer and overcoming drug resistance are desired. In cancer treatment, ZnO nanoparticles (NPs) have the capacity to specifically and compellingly activate apoptosis of cancer cells. There is also a pressing need to develop innovative anti-cancer therapeutics, and recent research suggests that ZnO nanoparticles hold great potential. Here, the in vitro chemical effectiveness of ZnO NPs has been tested. Zinc oxide (ZnO) nanoparticles were synthesized using Citrullus colocynthis (L.) Schrad by green methods approach. The generated ZnO was observed to have a hexagonal wurtzite crystal arrangement. The generated nanomaterials were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), UV-visible spectroscopy. The crystallinity of ZnO was reported to be in the range 50–60 nm. The NPs morphology showed a strong absorbance at 374 nm with an estimated gap band of 3.20 eV to 3.32 eV. Microscopy analysis proved the morphology and distribution of the generated nanoparticles to be around 50 nm, with the elemental studies showing the elemental composition of ZnO and further confirming the purity of ZnO NPs. The cytotoxic effect of ZnO NPs was evaluated against wild-type and doxorubicin-resistant MCF-7 and MDA-MB-231 breast cancer cell lines. The results showed the ability of ZnO NPs to inhibit the prefoliation of MCF-7 and MDA-MB-231 prefoliation through the induction of apoptosis without significant differences in both wild-type and resistance to doxorubicin.     

ZnO Nanoparticles of Rubia cordifolia Extract Formulation Developed and Optimized with QbD Application,Considering Ex Vivo Skin Permeation,Antimicrobial and Antioxidant Properties

The objective of the current research is to develop ZnO-Manjistha extract (ZnO-MJE) nanoparticles (NPs) and to investigate their transdermal delivery as well as antimicrobial and antioxidant activity. The optimized formulation was further evaluated based on different parameters. The ZnO-MJE-NPs were prepared by mixing 10 mM ZnSO₄·7H₂O and 0.8% w/v NaOH in distilled water. To the above, a solution of 10 mL MJE (10 mg) in 50 mL of zinc sulfate was added. Box–Behnken design (Design-Expert software 12.0.1.0) was used for the optimization of ZnO-MJE-NP formulations. The ZnO-MJE-NPs were evaluated for their physicochemical characterization, in vitro release activity, ex vivo permeation across rat skin, antimicrobial activity using sterilized agar media, and antioxidant activity by the DPPH free radical method. The optimized ZnO-MJE-NP formulation (F13) showed a particle size of 257.1 ± 0.76 nm, PDI value of 0.289 ± 0.003, and entrapment efficiency of 79 ± 0.33%. Drug release kinetic models showed that the formulation followed the Korsmeyer–Peppas model with a drug release of 34.50 ± 2.56 at pH 7.4 in 24 h. In ex vivo studies ZnO-MJE-NPs-opt permeation was 63.26%. The antibacterial activity was found to be enhanced in ZnO-MJE-NPs-opt and antioxidant activity was found to be highest (93.14 ± 4.05%) at 100 µg/mL concentrations. The ZnO-MJE-NPs-opt formulation showed prolonged release of the MJE and intensified permeation. Moreover, the formulation was found to show significantly (p < 0.05) better antimicrobial and antioxidant activity as compared to conventional suspension formulations.     

Liquid chromatographic separation and determination of aromatic sulfonates in an aquatic environment using a photodiode array and electrospray ionization-mass spectrometer as detectors.

A simple and rapid method involving high-performance liquid chromatographic separation, followed by photodiode array (PDA) and electrospray ionization-mass spectrometric (ESI-MS) detection of aromatic sulfonates in waste-water effluents of industrial units producing optical whitening agents, has been developed. The separation was achieved on a reversed-phase Hypersil C18 column using gradient elution of a mobile phase consisting of 0.05 M ammonium formate-methanol with decreasing concentration of the buffer at room temperature. The minimum detection limits were determined to be in the range of 0.2 - 1.8 x 10(-9) g using PDA and ESI-MS detectors.     

Reduction of clay surface-sorbed organometallics during measurement of X-ray photoelectron spectra (XPS)

Some organometallic compounds, e.g. Ph₃SnCl, react on the surface of the smectite clay, laponite. Other compounds, e.g. Br₃TeC₆H₄CH=NCH₂CH₂N=CHC₆H₄TeBr₃, are sorbed onto the organophilic surface of cetylpyridinium-ion-exchanged Wyoming bentonite. X-ray photoelectron spectroscopy (XPS) is an appropriate technique with which to examine the nature of the surface-sorbed species; however, it is demonstrated that decomposition of the organometallic can occur when the clay surface is exposed over a period of time to energetic X-rays. Thus, care must be taken with the interpretation of data of which some features may be the result of the XPS experiment.     

Mechanistic studies of the tellurium(II)/tellurium(IV) redox cycle in thiol peroxidase-like reactions of diorganotellurides in methanol

Di-n-hexyl telluride (2), di-p-methoxyphenyl telluride (3), and (S)-2-(1-N,N-dimethylaminoethyl)phenyl phenyl telluride (4) catalyzed the oxidation of PhSH to PhSSPh with H(2)O(2) in MeOH. Telluride 2 displayed greater rate acceleration than the diaryltellurides 3 and 4 as determined by the initial velocities, v(0), for the rate of appearance of PhSSPh determined at 305 nm by stopped-flow spectroscopy. Rate constants for the oxidation of tellurides 2-4 (k(ox)), rate constants for the introduction of PhSH as a ligand to the Te(IV) center (k(PhSH)) of oxidized tellurides 5-7, and thiol-independent (k(1)) and thiol-dependent (k(2)) rate constants for reductive elimination at Te(IV) in oxidized tellurides 5-7 were determined using stopped-flow spectroscopy. Oxidation of the Te atom of the electron-rich dialkyl telluride 2 was more rapid than oxidation of diaryl tellurides 3 and 4. The dimethylaminoethyl substituent of 4, which acts as a chelating ligand to Te(IV), did not affect k(ox). Values of k(PhSH) for the introduction of PhSH to oxidized dialkyl tellurane 5 and oxidized diaryl tellurane 6 were comparable in magnitude, while the chelating dimethylaminoethyl ligand of oxidized telluride 7 diminished k(PhSH) by a fator of 10(3). Reductive elimination by both first-order, thiol-independent (k(1)) and second-order, thiol-dependent (k(2)) pathways was slower from dialkyl Te(IV) species derived from 2 than from diaryl Te(IV) species derived from 3. The chelating dimethylaminoethyl ligand of Te(IV) species derived from 4 diminished k(1) by a factor of 50 and k(2) by a factor of 3 (relative to the 3-derived species).     

The rotational and vibrational spectra,structure and dipole moment of 1,3-dioxole-2-thione

Rotational and centrifugal distortion constants are determined for the ground state and several excited states of the lowest vibrational mode of l,3-dioxole-2-thione, the “envelope” ring-bending mode. The structure of the molecule is planar. The A-constant is 1% larger than that of 1,3-dioxole-2-one (vinylene carbonate), which indicates small changes in ring-geometry on substituting CS for CO. The dipole moment of 1,3-dioxole-2-thione deduced from Stark-effect measurements is (1.60 ± 0.02) × 10^?29 Cm (4.81 ± 0.06 D). IR and Raman spectra lead to a complete analysis of the normal modes of vibration, based partially on a normal coordinate calculation.     

An inter-laboratory comparison study for the determination of copper and lead from the wastewater of printed circuit board manufacturing industry in Pakistan

This inter-laboratory comparison study was arranged for 28 laboratories from different public and private sector organizations in Pakistan having wastewater testing capabilities aimed at improving the quality and comparability of test results. This national inter-laboratory study was started in December 2003 and completed in July 2004. Laboratories were invited to analyze the wastewater collected from printed circuit board (PCB) industry for lead and copper contamination. The samples fulfill the criteria for homogeneity and stability as done by the reference laboratory. The results obtained from participating laboratories were analyzed in terms of Hampel Test for outliers, while the performance evaluation of the participating laboratories was done on the basis of Z-score. An assigned value derived from the participant's results was compared with a reference value provided by a reference laboratory. Overall >50% of the participating laboratories have shown good performance in this PT-program     

Rapid microwave assisted synthesis of 3-substituted 4-thioxo-oxazolidin-2-ones

The microwave assisted thionation of 3-substituted 4-imino-oxazolidin-2-ones with hydrogen sulfide in dichloromethane-pyridine afforded 3-substituted 4-thioxo-oxazolidin-2-ones.     

A thermodynamic study of the association of alkali metal cations with dicyclohexano-18-crown-6

A thermodynamic study of the association of Na⁺, K⁺, Rb⁺, and Cs⁺ with dicyclohexano-18-crown-6 in acetonitrile has been carried out at 308, 303, 298, 293, and 288 K using a conductometric technique. The observed molar conductivities, A, were found to decrease significantly for mole ratios less than unity. A model involving 11 stoichiometry has been used to analyze the conductivity data. The stability constant,K, and the limiting molar conductivity, A _c , for each 11 complex were determined from the conductivity data by using a nonlinear least squares curve fitting procedure. The binding sequence, based on the value of logK at 298 K, as derived from this study is K⁺>Na⁺>Rb⁺>Cs⁺. Values of H ^o and S ^o are reported and their significance is discussed.