Reductive Elimination of Phenylsulfonyl Groups in the 3‐Position of Benzo[a]heptalene‐2,4‐diols

3‐(Phenylsulfonyl)benzo[a]heptalene‐2,4‐diols 1 can be desulfonylated with an excess of LiAlH₄/MeLi?LiBr in boiling THF in good yields (Scheme 6). When the reaction is run with LiAlH₄/MeLi, mainly the 3,3′‐disulfides 6 of the corresponding 2,4‐dihydroxybenzo[a]heptalene‐3‐thiols are formed after workup (Scheme 7). However, the best yields of desulfonylated products are obtained when the 2,4‐dimethoxy‐substituted benzo[a]heptalenes 2 are reduced with an excess of LiAlH₄/TiCl₄ at ?78→20° in THF (Scheme 10). Attempts to substitute the PhSO₂ group of 2 with freshly prepared MeONa in boiling THF led to a highly selective ether cleavage of the 4‐MeO group, rather than to desulfonylation (Scheme 13).     

Facile electrodeposition of ZnO on graphitic substrate for photocatalytic application: degradation of antibiotics in a continuous stirred-tank reactor

Journal of Solid State Electrochemistry - This work discusses the possibility of obtaining ZnO film on graphite, which can be widely used for photocatalysis, photocells, photodetectors, etc. The...     

Effect of moisture content on the 222Rn mass exhalation rates for different grain-size samples of red brick and cement mortar used in Qena city,Egypt

Journal of Radioanalytical and Nuclear Chemistry - Four different grain size fractions (0.2–0.5, 0.5–1, 1–1.8, 1.8–2 mm) of red brick and cement mortar samples at...     

A ‘One-Pot’ Anellation Method for the Transformation of Heptalene-4,5-dicarboxylates into Benzo[a]heptalenes

It has been found that dimethyl heptalene-4,5-dicarboxylates, when treated with 4 mol-equiv. of lithiated N,N-dialkylamino methyl sulfones or methyl phenyl sulfone, followed by 4 mol-equiv. of BuLi in THF in the temperature range of ?78 to 20°, give rise to the formation of 3-[(N,N-dialkylamino)sulfonyl]- or 3-(phenylsul-fonyl)benzo[a]heptalene-2,4-diols of. (cf. Scheme 4, and Tables 2 and 3). Accompanying products are 2,4-bis{[(N,N-dialkylamino)sulfonyl]methyl}- or 2,4-bis[(phenylsulfonyl)methyl]-4,10a-dihydro-3H-heptaleno[1,10-bc]furan-3-carboxylates as mixtures of diastereoisomers of. cf. Scheme 4, and (Tables 2 and 3) which are the result of a Michael addition reaction of the lithiated methyl sulfones at C(3) of the heptalene-4,5-dicarboxylates, followed by (sulfonyl)methylation of the methoxycarbonyl group at C(5) and cyclization of. (cf. Scheme 5). It is assumed that the benzo[a]heptalene formation is due to (sulfonyl)methylation of both methoxycarbonyl groups of the heptalene-4,5-dicarboxylates of. (cf. Schemes 6 and 8). The resulting bis-enolates 35 are deprotonated further. The thus formed tris-anions 36 can then cyclize to corresponding tris-anions 37 of cyclopenta[d]heptalenes which, after loss of N,N-dialkylamido sulfite or phenyl sulfinate, undergo a ring-enlargement reaction by 1,2-C migration finally leading to the observed benzo[a]heptalenes of. (cf. Schemes 8 and 9). The structures of the new product types have been finally established by X-ray crystal-structure analyses (cf. Figs. 1 and 2 as well as Exper. Part).     

On the crystallization of γ-isotactic polypropylene: A high pressure study

The non-parallel chain structure determined for γ-phase isotactic polypropylene (γ-iPP) is confirmed by Rietveld analysis for highly isotactic high molecular mass iPP crystallized at 200 MPa. The new refinement shows that: (i) stereoregularity or crystallization pressure do not significantly influence the lattice dimensions; (ii) defect inclusion in γ-iPP crystals is unlikely. The α and γ forms have nearly identical bulk internal energy and density, but α-iPP should be normally kinetically favored over γ-iPP which may in turn predominate due to its greater ability to host defects at the crystalline-amorphous interface.     

Proposed Mechanism for the Antitrypanosomal Activity of Quercetin and Myricetin Isolated from Hypericum afrum Lam.: Phytochemistry,In Vitro Testing and Modeling Studies

The in vitro activity of L. donovani (promastigotes, axenic amastigotes and intracellular amastigotes in THP1 cells) and T. brucei, from the fractions obtained from the hydroalcoholic extract of the aerial part of Hypericum afrum and the isolated compounds, has been evaluated. The chloroform, ethyl acetate and n-butanol extracts showed significant antitrypanosomal activity towards T. brucei, with IC₅₀ values of 12.35, 13.53 and 12.93 µg/mL and with IC₉₀ values of 14.94, 19.31 and 18.67 µg/mL, respectively. The phytochemical investigation of the fractions led to the isolation and identification of quercetin (1), myricitrin (2), biapigenin (3), myricetin (4), hyperoside (5), myricetin-3-O-β-d-galactopyranoside (6) and myricetin-3’-O-β-d-glucopyranoside (7). Myricetin-3’-O-β-d-glucopyranoside (7) has been isolated for the first time from this genus. The chemical structures were elucidated by using comprehensive one- and two-dimensional nuclear magnetic resonance (1D and 2D NMR) spectroscopic data, as well as high-resolution electrospray ionization mass spectrometry (HR-ESI–MS). These compounds have also been evaluated for their antiprotozoal activity. Quercetin (1) and myricetin (4) showed noteworthy activity against T. brucei, with IC₅₀ and IC₉₀ values of 7.52 and 5.71 µM, and 9.76 and 7.97 µM, respectively. The T. brucei hexokinase (TbHK1) enzyme was further explored as a potential target of quercetin and myricetin, using molecular modeling studies. This proposed mechanism assists in the exploration of new candidates for novel antitrypanosomal drugs.     

Two- and three-dimensional comparative study of heat transfer and pressure drop characteristics of nanofluids flow through a ventilated cubic cavity (part I: Newtonian nanofluids)

Journal of Thermal Analysis and Calorimetry - Through this paper, three-dimensional fluid flow and heat transfer of Al2O3 nanofluid within ventilated enclosures was taken into consideration....     

Surface Polymers on Multiwalled Carbon Nanotubes for Selective Extraction and Electrochemical Determination of Rhodamine B in Food Samples

In this study, we combine magnetic solid phase extraction (MSPE), with the screen-printed carbon electrode (SPCE) modified by a molecular imprinted polymer (MIP) for sensitive and selective extraction and electrochemical determination of Rhodamine B in food samples. A magnetic solid phase extraction (MSPE) was carried out using magnetic poly(styrene-co-divinylbenzene) (PS-DVB) and magnetic nanoparticles (MNPs) synthetized on the surface of multiwalled carbon nanotubes (MWCNTs). An MIP was prepared on the surface of MWCNTs in the presence of titanium oxide nanoparticles (TiO₂NPs) modifying the SPCE for the rapid electrochemical detection of Rhodamine B. The MIPs synthesis was optimized by varying the activated titanium oxide (TiO₂) and multiwalled carbon nanotubes (MWCNTs) amounts. The MSPE and electrochemical detection conditions were optimized as well. The present method exhibited good selectivity, high sensitivity, and good reproducibility towards the determination of Rhodamine B, making it a suitable method for the determination of Rhodamine B in food samples.     

Design,Synthesis, Biological Evaluation and In Silico Study of Benzyloxybenzaldehyde Derivatives as Selective ALDH1A3 Inhibitors

Aldehyde dehydrogenase 1A3 (ALDH1A3) has recently gained attention from researchers in the cancer field. Several studies have reported ALDH1A3 overexpression in different cancer types, which has been found to correlate with poor treatment recovery. Therefore, finding selective inhibitors against ALDH1A3 could result in new treatment options for cancer treatment. In this study, ALDH1A3-selective candidates were designed based on the physiological substrate resemblance, synthesized and investigated for ALDH1A1, ALDH1A3 and ALDH3A1 selectivity and cytotoxicity using ALDH-positive A549 and ALDH-negative H1299 cells. Two compounds (ABMM-15 and ABMM-16), with a benzyloxybenzaldehyde scaffold, were found to be the most potent and selective inhibitors for ALDH1A3, with IC₅₀ values of 0.23 and 1.29 µM, respectively. The results also show no significant cytotoxicity for ABMM-15 and ABMM-16 on either cell line. However, a few other candidates (ABMM-6, ABMM-24, ABMM-32) showed considerable cytotoxicity on H1299 cells, when compared to A549 cells, with IC₅₀ values of 14.0, 13.7 and 13.0 µM, respectively. The computational study supported the experimental results and suggested a good binding for ABMM-15 and ABMM-16 to the ALDH1A3 isoform. From the obtained results, it can be concluded that benzyloxybenzaldehyde might be considered a promising scaffold for further drug discovery aimed at exploiting ALDH1A3 for therapeutic intervention.