Starch cellulose acetate co-acrylate (SCAA) polymer as a drug carrier

The present study aims to create a controlled-release system through the preparation and characterization of starch cellulose acetate co-acrylate (SCAA) polymer for application as a carrier for cancer drugs. SCA was prepared from maize starch and different ratios of cellulose acetate. The obtained product SCA was reacted with acrylic acid monomer to give cellulose acetate co-acrylate. The best ratio of starch to cellulose acetate was found to be 90:10, giving a stable product with acrylic acid. The cancer drug 8-(2-methoxyphenyl)-3,4-dioxo-6-thioxo-3,4,6,7-tetrahydro-2h-pyrimido[6,1-c]-[1,2,4]triazine-9-carbonitrile was dissolved in dimethylformamide then added gradually at the end of the previous reaction under stirring for 15 min. The prepared polymers with and without the drug were characterized by Fourier-transform infrared spectroscopy. Cuboids discs of the prepared polymer/drug were subjected to drug release in aqueous media at different pH values. The release was measured spectrophotometrically. It was found that the release rate depends on the pH of the aqueous medium as well as on the concentration of the drug loaded onto the polymer carrier. Above pH 12, the polymer containing the drug degraded completely within 1 h after being subjected to alkaline media. Sustained release of drug extended to about 20 days. The amount released depended on the pH of the media in the following order: basic media > acidic media > neutral. According to Higuch’s equation, the diffusion coefficient was found to be 4.2 × 10^?8 and 5.5 × 10^?8 cm s^?1 for the two evaluated concentrations (1.5 and 2 %) of active organic compound (drug).     

A structural, theoretical and coordinative evaluation of the bicyclic guanidinate derived from 1,4,6-triazabicyclo[3.3.0]oct-4-ene

Partial deprotonation of the bicyclic guanidine 1,4,6-triazabicyclo[3.3.0]oct-4-ene (Htbo) is achieved using (n)BuLi. Isolation of the resulting lithium salts has resulted in the structural characterization of the mixed anion complex {[Li(tbo)()(tboH)](2)}(infinity) (where -H = 1-(2-aminoethyl)-2-imidazolidinethione) and the partially deprotonated salt Li(6)(tbo)(6)(Htbo)(3), . The neutral guanidine Htbo reacts cleanly with AlMe(3) and ZnMe(2) to afford the organometallic complexes [Al(tbo)Me(2)](2) [](2), and Zn(3)(tbo)(4)Me(2) (). Structural characterization of these compounds enables comparison between the {5:5}-bicyclic system, [tbo](-), and the previously reported {6:6}-bicyclic system, [hpp](-) (where hppH = 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). Results indicate that delocalization within the [tbo](-) anion is restricted to the CN(2) amidinate component, with retention of electron density in the non-bonding nitrogen lone-pair. These conclusions are supported by a DFT analysis of the neutral guanidines, Htbo and hppH.     

Organosilica composite for preconcentration of phenolic compounds from aqueous solutions

A new adsorbent is proposed for the solid-phase extraction of phenol and 1-naphthol from polluted water. The adsorbent (TX-SiO₂) is an organosilica composite made from a bifunctional immobilized layer comprising a major fraction (91%) of hydrophilic diol groups and minor fraction (9%) of the amphiphilic long-chain nonionic surfactant Triton X-100 (polyoxyethylated isooctylphenol) (TX). Under static conditions phenol was quantitatively extracted onto TX-SiO₂ in the form of a 4-nitrophenylazophenolate ion associate with cetyltrimethylammonium bromide. The capacity of TX-SiO₂ for phenol is 2.4 mg g⁻¹ with distribution coefficients up to 3.4 × 10⁴ mL g⁻¹; corresponding data for 1-naphthol are 1.5 mg g⁻¹ and 3 × 10³ mL g⁻¹. The distribution coefficient does not change significantly for solution volumes of 0.025–0.5 L and adsorbent mass less than 0.03 g; 1–90 μg analyte can be easily eluted by 1–3 mL acetonitrile with an overall recovery of 98.2% and 78.3% for phenol and 1-naphthol, respectively. Linear correlation between acetonitrile solution absorbance (A ₅₄₀) and phenol concentration (C) in water was found according to the equation A ₅₄₀ = (6 ± 1) × 10⁻² + (0.9 ± 0.1)C (μmol L⁻¹) with a detection range from 1 × 10⁻⁸ mol L⁻¹ (0.9 μL g⁻¹) to 2 × 10⁻⁷ mol L⁻¹ (19 μL g⁻¹), a limit of quantification of 1 μL g⁻¹ (preconcentration factor 125), correlation coefficient of 0.936, and relative standard deviation of 2.5%. A solid-phase colorimetric method was developed for quantitative determination of 1-naphthol on adsorbent phase using scanner technology and RGB numerical analysis. The detection limit of 1-naphthol with this method is 6 μL g⁻¹ while the quantification limit is 20 μL g⁻¹. A test system was developed for naked eye monitoring of 1-naphthol impurities in water. The proposed test kit allows one to observe changes in the adsorbent color when 1-naphthol concentration in water is 0.08–3.2 mL g⁻¹.     

Effect of chitosan derivatives as rubber antioxidants for increasing durability

A series of chitosan derivatives, namely polydiethylamino-ethylmethacrylate-chitosan-graft-copolymer (chitosan-g-DEAEMA), polycarboxy-chitosan-graft copolymer (chitosan-g-COOH), polyvinyl alcohol chitosan-graft-copolymer (chitosan-g-VOH), and carboxymethyl-chitosan (CM-chitosan), were synthesized and investigated as antioxidants for natural rubber (NR) and acrylonitrile butadiene rubber (NBR) mixes and vulcanizates to increase their durability. The rheometric characteristics of the rubber mixes were determined using an oscillating disc rheometer. The physico-mechanical properties of the rubber vulcanized were measured before and after exposure to thermal oxidative aging. It was found that the CM-chitosan had an accelerating effect on the curing process of NR and NBR. Also, the investigated polymers enhanced the properties of rubbers (NR and NBR) especially after ageing up to 7 days compared with commercial antioxidants, such as phenyl ß-naphthylamine (PßN) and N-isopropel-Nphenyl-p-phenylene diamine (IPPD) which are used in the rubber industry. After ageing, the retained values of tensile strength, modulus at 100 % strain, and elongation at break were improved. The optimum concentration of the investigated compounds used to give good properties was found to be 1–2 parts per 100 of rubber (phr). In addition, these prepared polymers showed a decrease in the equilibrium swelling of rubber in toluene which is the proper solvent and consequently increases the crosslink density for rubbers.     

Spectrophotometric determination of phenol and resorcinol by reaction with p-aminophenol

Based on the reaction with p-aminophenol, a series of procedures have been developed for the spectrophotometric determination of phenol and resorcinol. Three basic approaches have been studied: (i) a batch procedure, using the dissolved oxygen as oxidant, (ii) a stopped-flow procedure by use of KIO(4) as oxidant and (iii) a flow injection (FI) procedure developed in the presence of KIO(4). Phenol can be accurately determined at 626 nm, in the stopped-flow mode, after a reaction time of 45 min in 0.005M NaOH, 0.004M KIO(4) and 500 mug/ml of PAP. The development of a manifold, which incorporates a sample parking, is a convenient approach which makes it possible to measure, in the stopped-flow mode, four solutions in one hour. The limit of detection of this method corresponds to 64 ng/ml of phenol Resorcinol can be determined by FI at 540 nm in 0.006M NaOH, 0.0002M KIO(4) and 50 mug/ml PAP with a limit of detection of 6.6 ng/ml and a sample throughput of 300 injections per hour. A combination between the FI procedure for the determination of resorcinol and the stopped-flow procedure for phenol determination provides accurate results in the analysis of spiked samples containing both phenol and resorcinol.     

Isonitrile Formation by a Non‐Heme Iron(II)‐Dependent Oxidase/Decarboxylase

The electron‐rich isonitrile is an important functionality in bioactive natural products, but its biosynthesis has been restricted to the IsnA family of isonitrile synthases. We herein provide the first structural and biochemical evidence of an alternative mechanism for isonitrile formation. ScoE, a putative non‐heme iron(II)‐dependent enzyme from Streptomyces coeruleorubidus, was shown to catalyze the conversion of (R)‐3‐((carboxymethyl)amino)butanoic acid to (R)‐3‐isocyanobutanoic acid through an oxidative decarboxylation mechanism. This work further provides a revised scheme for the biosynthesis of a unique class of isonitrile lipopeptides, of which several members are critical for the virulence of pathogenic mycobacteria.     

Dynamical behavior and network analysis of an extended Hindmarsh–Rose neuron model

Nonlinear Dynamics - In this paper, the extended Hindmarsh–Rose neuron model, which considers the slow intracellular exchange of calcium ions between its store and the cytoplasm, is studied....     

Application of Ranging Analysis to the Quality Assessment of Wines on a Nominal Scale

This work is dedicated to wine quality assessment methods as a problem of considerable current interest. Well-known approaches to wine quality assessment are considered based on the concentrations of volatile substances in wines and on the results of their taste tests. Comparative analysis was carried out for the evaluation of wines on a nominal scale of quality (high, medium, low, and adulterated) by means of discriminant analysis. It was found that the classification of wines based on quality with the use of discriminant analysis as a ranging analysis method with consideration for the concentrations of volatile substances, which are responsible for their organoleptic properties, is highly competitive with their expert (tasting) evaluation. A mathematical model was constructed for the classification of wines into the above categories, and a program module was developed for the automation of calculations.     

Spectrophotometric Determination of Cobalt with Di-2-Pyridyl Ketone Benzoylhydrazone

Abstract

A method for the spectrophotometric determination of cobalt (II) by complexation with di-2-pyridyl ketone benzoylhydrazone (DPKBH) in 50% (v/v) ethanolic solution is described. Cobalt (II) forms a 1:2 complex with DPKBH. The complex has maximum absorbance at 370 nm. Beer's law is obeyed over the range 0.1 – 2.8 μg.ml^?1. The effect of pH, effect of excess reagent, stability of the complex and the tolerance limit of many metal ions have been reported. The method is applied to the determination of cobalt in different alloys containing other metals ions.