Fluorine-Boosted Kinetic and Selective Molecular Sieving of C6 Derivatives

Porous molecular sorbents have excellent selectivity towards hydrocarbon separation with energy saving techniques. However, to realize commercialization, molecular sieving processes should be faster and more efficient compared to extended frameworks. In this work, we show that utilizing fluorine to improve the hydrophobic profile of leaning pillararenes affords a substantial kinetic selective adsorption of benzene over cyclohexane (20 : 1 for benzene). The crystal structure shows a porous macrocycle that acts as a perfect match for benzene in both the intrinsic and extrinsic cavities with strong interactions in the solid state. The fluorinated leaning pillararene surpasses all reported organic molecular sieves and is comparable to the extended metal–organic frameworks that were previously employed for this separation such as UIO-66. Most importantly, this sieving system outperformed the well-known zeolitic imidazolate frameworks under low pressure, which opens the door to new generations of molecular sieves that can compete with extended frameworks for more sustainable hydrocarbon separation.     

Thermoluminescence and optically stimulated luminescence in various phases of doped Na2SO4

The dependence of optically stimulated luminescence (OSL) and thermoluminescence (TL) response due to crystal phase in Cu and Cu,Mg-doped Na₂SO₄ was studied. Study shows that the slowly cooled samples which crystallize in phase V show good OSL sensitivity whereas the quenched samples of Na₂SO₄ which crystallize in phase III irrespective of doping show no OSL sensitivity. However, during storage when phase III samples get converted to phase V, samples show OSL sensitivity comparable to freshly prepared samples in phase V. Hence, it is observed that TL–OSL properties of doped Na₂SO₄ are phase dependent .This study will be helpful in developing OSL phosphors in which phase plays an important role in deciding the desired properties.     

Immobilization of the Gas Signaling Molecule H2S by Radioisotopes: Detection,Quantification, and In Vivo Imaging

Hydrogen sulfide (H₂S) has multifunctional roles as a gas signaling molecule in living systems. However, the efficient detection and imaging of H₂S in live animals is very challenging. Herein, we report the first radioisotope‐based immobilization technique for the detection, quantification, and in vivo imaging of endogenous H₂S. Macrocyclic ⁶⁴Cu complexes that instantly reacted with gaseous H₂S to form insoluble ⁶⁴CuS in a highly sensitive and selective manner were prepared. The H₂S concentration in biological samples was measured by a thin‐layer radiochromatography method. When ⁶⁴Cu–cyclen was injected into mice, an elevated H₂S concentration in the inflamed paw was clearly visualized and quantified by Cerenkov luminescence and positron emission tomography (PET) imaging. PET imaging was also able to pinpoint increased H₂S levels in a millimeter‐sized infarcted lesion of the rat heart.     

Compressive stress relaxation of metallocene‐based polyolefin foams: Effect of gamma‐ray‐induced crosslinking

Metallocene‐based polyolefin (MPO) foams possess a closed‐cell structure which is in contrast to the open‐celled structure of polyurethane (PU) foams. In this study, we investigate the effects of gamma‐irradiation on the mechanical behavior of MPO foams using PU foam behavior as a basis. Compressive step‐strain experiments reveal a two‐step relaxation process in MPO foams, dominated by polymer chain relaxation at short times and gas diffusion from the closed cells at longer times. On the other hand, the relaxation in PU foams is similar to fully crosslinked polymers with the relaxation modulus reaching an equilibrium value after an initial decay. The closed‐celled structure of MPO foams lends to rapid stress relaxation and low structural recoverability upon application of compressive loads. Exposure to gamma radiation induces crosslinking in MPO foams and improves their resilience and recoverability. Stress relaxation tests reveal that nonradiated MPO foams show complete relaxation and structural loss at high temperatures. In contrast, radiated MPO foams show a significant retardation in relaxation kinetics and structural stability attributed to radiation‐induced crosslinking. Dynamic rheology and solvent‐extraction studies also support the results obtained from stress‐relaxation experiments. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1045–1056, 1999     

Aromatization and chemoselective alkylation of 1-methyl-3,4-dihydro-β-carboline-3-carboxylic acid and its derivatives

Unprecedented aromatization was observed during N-alkylation reactions of 1-methyl-3,4-dihydro-β-carboline-3-carboxylic acid methyl ester, giving rise to 9-alkyl-1-methyl-β-carboline-3-carboxylic acid methyl esters. Inverse addition of base during a similar reaction resulted in a chemoselective alkylation to form novel 3-butyl-1-methyl-3,4-dihydro-β-carboline-3-carboxylic acid methyl ester as the major product in good yield.     

Thermodynamic prediction of bulk metallic glass forming alloys in ternary Zr–Cu–X (X = Ag,Al, Ti,Ga) systems

Prediction of bulk metallic glass (BMG) forming compositions has always been a challenge due to thermodynamic and kinetic constraints. In the present investigation, a parameter based on the enthalpy of chemical mixing (?H_chem) and the mismatch entropy (?S_σ/k_B) has been used to correlate with glass forming ability in some Zr based BMGs. The new thermodynamic parameter, P_HS = ?H_chem × ?S_σ/k_B, is found to have strong correlation with glass forming ability in the configurational entropy (?S_config/R) range of 0.9–1.0. P_HS has been calculated for compositions in Zr–Cu–Ag, Zr–Cu–Al, Zr–Cu–Ti and Zr–Cu–Ga ternary systems. It is observed that in all the systems studied, the best BMG composition (highest critical diameter (Z_c) of glass formation) is the one that corresponds to the highest negative P_HS value. Present approach using P_HS could be road map to design new BMG forming compositions.     

Cyclic voltammetry of Th(IV) in the room-temperature ionic liquid [Me3NnBu][N(SO2CF3)2

A Th(IV) compound, [Th(TFSI)4(HTFSI)].2H2O [where TFSI = N(SO2CF3)2], has been synthesized and characterized using elemental analysis, thermogravimetric analysis, and vibrational spectroscopy. The analysis suggests that the TFSI anion coordinates to the metal center via the sulfonyl oxygens as well as provides evidence for the coordination of HTFSI. The voltammetric behavior of this compound has been studied in the room-temperature ionic liquid [Me3NnBu][TFSI], and results show that Th(IV) is reduced to Th(0) in this ionic liquid in a single reduction step. Analysis of cyclic voltammograms shows that an insoluble product is being formed at the electrode surface, which is attributed to the formation of ThO2 by reaction with water. The E0 value for the reduction of Th(IV) to Th(0) has been determined to be -2.20 V (vs Fc+/Fc; -1.80 V vs SHE). A comparison of this E0 value with those obtained for Th(IV) reduction in a LiCl-KCl eutectic (400 degrees C), water, and nonaqueous solvents shows that the reduction in [Me3NnBu][TFSI] is easier to accomplish than that in these other solvents.     

An extensive study on isosorbide-5-mononitrate acid adducts for quantification in human plasma using liquid chromatography/electrospray ionization tandem mass spectrometry and its application to bioequivalence sample analysis

A rapid and sensitive liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) method for the determination of isosorbide-5-mononitrate (5-ISMN), used in the treatment of angina pectoris, in human plasma is described. The quantification of 5-ISMN was performed via stable acetate adduct formation with a high relative abundance. The plasma filtrate obtained after solid-phase extraction (SPE), using a polymer based, hydrophilic-lipophilic balanced (HLB) cartridge, was submitted directly to reversed-phase high-performance liquid chromatography separation followed by ESI and detection of the resulting ions using triple-quadrupole mass spectrometry in selected reaction monitoring (SRM) mode. There was no significant matrix effect on the analysis. For validation of the method, the recovery of the free analyte response was compared to that obtained from an optimized extraction method. The analyte stability was examined under conditions mimicking the sample storage, handling, and analytical procedures. The extraction procedure yielded extremely clean extracts with a recovery of 95.51% and 93.98% for iossorbide-5-mononitrate and topiramate (internal standard (IS)), respectively. The calibration curves were linear for the dynamic range of 10.0 to 1000.0 ng/mL with a correlation coefficient r > or = 0.9985. The intra-assay and inter-assay precision for the samples at the lower limit of quantification (LLOQ) were 9.02 and 13.30%, respectively. The intra-assay accuracies at LLOQ, LQC, MQC and HQC levels varied from 98.13 to 118.15, 102.34 to 105.21, 100.69 to 109.68, and 95.76 to 102.92%, respectively, while the inter-assay accuracies ranged from 93.10 to 118.15, 93.03 to 107.04, 86.97 to 109.68 and 86.18 to 105.85%, respectively, at these levels. The method is rugged and fast with a total run time of 2 min. The method was successfully applied for a bioequivalence study in 24 human subject samples after oral administration of 60 mg extended release (ER) formulations.