Two-, three-, and four-coordinate Ag(I) coordination polymers formed by the novel phosphinite PPh2(3-OCH2C5H4N)

The novel phosphinite PPh(2)(3-OCH(2)C(5)H(4)N) (1) has been synthesized, and its coordination properties to Ag(I) have been studied. When reacted in a 1:1 ratio with Ag(I), coordination polymers with different coordination numbers about the Ag are found depending on the anion. For PPh(2)(3-OCH(2)C(5)H(4)N)AgBF(4) (2), a two-coordinate Ag is observed with a P-Ag-N angle of 167 degrees. Mixed three and four coordination about Ag is observed for PPh(2)(3-OCH(2)C(5)H(4)N)AgOTf (3), and for the trifluoroacetate derivative, PPh(2)(3-OCH(2)C(5)H(4)N)Agtfa (4), only a four-coordinate Ag is produced. X-ray crystal-structure determinations for compounds 2-4 have been carried out. The X-ray structures show a wide range of Ag-Ag distances in the polymers, which are dependent on the conformation of the bridging ligand.     

Acid-Catalyzed Amine-Borane Reduction of Nitrite

The rate of reduction of nitrite by trimethylamine-borane was followed by observing the decrease in nitrite absorbance under pseudo-first-order conditions. The reaction is acid-catalyzed and exhibits a first-order dependence on both amine-borane and total nitrite concentration. The molar equivalence of NaNO(2) to (CH(3))(3)NBH(3) = 2:1. Equimolar amounts of hydrogen and nitrous oxide are formed, and the molar ratio of nitrite reacted to N(2)O produced is 2:1. In concentrated HCl or H(2)SO(4), a correlation of rate with the Hammett acidity function, h(o), is observed. The reaction is subject to a pronounced inversesolvent isotope effect (k(D)()2(O)/k(H)()2(O) approximately 2.7) and a modest normal substrate effect (k((CH)()3())()3(N.BH)()3/k((CH)()3())()3(N.BD)()3 approximately 1.4). The reaction is first-order in H(3)O(+) in the region pH 0.7-2.7, but a second-order dependence is observed above pH 4 with the transition occurring at pH approximately pK(a) for HNO(2). Results are consistent with a mechanistic model involving preequilibration protonation of molecular nitrous acid followed by rate-limiting hydride attack on H(2)ONO(+) or free NO(+) to produce nitrosyl hydride as a reactive intermediate.     

Effects of alkali metal halide salts on the hydrogen bond network of liquid water

Measurements of the oxygen K-edge X-ray absorption spectrum (XAS) of aqueous sodium halide solutions demonstrate that ions significantly perturb the electronic structure of adjacent water molecules. The addition of halide salts to water engenders an increase in the preedge intensity and a decrease in the postedge intensity of the XAS, analogous to those observed when increasing the temperature of pure water. The main-edge feature exhibits unique behavior and becomes more intense when salt is added. Density functional theory calculations of the XAS indicate that the observed red shift of the water transitions as a function of salt concentration arises from a strong, direct perturbation of the unoccupied molecular orbitals on water by anions, and does not require significant distortion of the hydrogen bond network beyond the first solvation shell. This contrasts the temperature-dependent spectral variations, which result primarily from intensity changes of specific transitions due to geometric rearrangement of the hydrogen bond network.     

Enantioselective aziridination using copper complexes of biaryl Schiff bases

Racemic 2,2'-diamino-6,6'-dimethylbiphenyl is resolved using simulated moving bed chromatography, and the absolute configuration of the enantiomers is confirmed via the X-ray crystal structure of a derivative. The diamine is condensed with a range of aldehydes to give bidentate aldimine proligands L. Molecular structures of the complexes formed between L and Cu(I) fall into two classes; bimetallic double helices ([Cu(2)L(2)](2+)) and monometallic ([CuL](+)). The latter are strikingly more efficient in the aziridination of alkenes than are the former in terms of rate, turnover, and enantioselection. In particular, the imine ligand formed from the diamine and 2,6-dichlorobenzaldehyde gives, in combination with Cu(I) or Cu(II), up to 99% ee in the aziridination of 6-acyl-2,2-dimethylchromene and 88-98% ee for a range of cinnamate esters. Styrenic and other alkenes are converted with lower selectivities (5-54%). The catalytic system shows a linear response in product ee to catalyst ee, and the product ee does not vary significantly during the reaction. UV spectrophotometric investigations indicate that conversion of Cu(I) to Cu(II) is not essential for catalysis but that Cu(II) is probably also a competent system.     

Targeting apoptosis via chemical design: inhibition of bid-induced cell death by small organic molecules

Bid is a key member of the Bcl-2 family proteins involved in the control of the apoptotic cascade in cells, leading to cell death. Uncontrolled cell death is associated with several human pathologies, such as neurodegenerative diseases and ischemic injuries. Therefore, Bid represents a potential yet unexplored and challenging target for strategies aimed at the development of therapeutic agents. Here we show that a multidisciplinary NMR-based approach that we named SAR by ILOEs (structure activity relationships by interligand nuclear Overhauser effect) allowed us to rationally design a series of 4-phenylsulfanyl-phenylamine derivatives that are capable of occupying a deep hydrophobic crevice on the surface of Bid. These compounds represent the first antiapoptotic small molecules targeting a Bcl-2 protein as shown by their ability to inhibit tBid-induced SMAC release, caspase-3 activation, and cell death.     

Evaluation of multidimensional (ion-exchange/reversed-phase) protein separations using linear and step gradients in the first dimension

The performance characteristics of multidimensional liquid chromatographic protein separations were evaluated using on-line electrospray mass detection, and a novel workflow for automated LC/MS data processing. Two-dimensional ion exchange/reversed-phase LC separations of Escherichia coli cytosol were conducted using either a continuous linear or discontinuous step gradient in the first dimension. Chromatographic profiles of the top 100 most abundant components were characterized to assess overall separation reproducibility within each mode, and to characterize differences in component distribution between the two modes of operation. Analysis of the resulting data indicates that multidimensional separations of complex protein mixtures can be done reproducibly. Furthermore, under the conditions employed within this study, a linear first dimension gradient was more effective at fractionating the protein mixture, distributing fewer major components to multiple second dimension cycles than an equivalent step gradient. The application of on line mass spectrometry, and automated processing of the resulting data, proved valuable for producing component level analysis of multidimensional protein separations.     

Classification of gasoline data obtained by gas chromatography using a piecewise alignment algorithm combined with feature selection and principal component analysis

A fast and objective chemometric classification method is developed and applied to the analysis of gas chromatography (GC) data from five commercial gasoline samples. The gasoline samples serve as model mixtures, whereas the focus is on the development and demonstration of the classification method. The method is based on objective retention time alignment (referred to as piecewise alignment) coupled with analysis of variance (ANOVA) feature selection prior to classification by principal component analysis (PCA) using optimal parameters. The degree-of-class-separation is used as a metric to objectively optimize the alignment and feature selection parameters using a suitable training set thereby reducing user subjectivity, as well as to indicate the success of the PCA clustering and classification. The degree-of-class-separation is calculated using Euclidean distances between the PCA scores of a subset of the replicate runs from two of the five fuel types, i.e., the training set. The unaligned training set that was directly submitted to PCA had a low degree-of-class-separation (0.4), and the PCA scores plot for the raw training set combined with the raw test set failed to correctly cluster the five sample types. After submitting the training set to piecewise alignment, the degree-of-class-separation increased (1.2), but when the same alignment parameters were applied to the training set combined with the test set, the scores plot clustering still did not yield five distinct groups. Applying feature selection to the unaligned training set increased the degree-of-class-separation (4.8), but chemical variations were still obscured by retention time variation and when the same feature selection conditions were used for the training set combined with the test set, only one of the five fuels was clustered correctly. However, piecewise alignment coupled with feature selection yielded a reasonably optimal degree-of-class-separation for the training set (9.2), and when the same alignment and ANOVA parameters were applied to the training set combined with the test set, the PCA scores plot correctly classified the gasoline fingerprints into five distinct clusters.     

A general and convenient synthesis of N-aryl piperazines

A general and convenient synthesis of N-aryl piperazines from bis(2-chloroethyl)amine hydrochloride and a broad range of anilines in diethylene glycol monomethyl ether is described.     

Cucurbit[6]uril pseudorotaxanes: distinctive gas-phase dissociation and reactivity

Cucurbit[6]uril forms a doubly charged complex with 1,4-butanediammonium cation that is observed using electrospray ionization Fourier transform mass spectrometry. Such 1:1 complexes are not observed for the smaller cucurbit[5]uril, which forms a 2:1 ammonium:cucurbituril complex instead. The 1:1 complex with cucurbit[6]uril is difficult to fragment via collisional activation; when it does fragment, both breakup of the cucurbituril cage and loss of the amine are observed. Further, the complex reacts with tert-butylamine via slow adduction. In contrast, nonrotaxane analogues (such as doubly charged 2:1 complexes of either protonated 1,4-butanediamine or protonated ethylenediamine with cucurbit[6]uril) fragment via easy loss of the intact amine upon collisional activation and react with tert-butylamine via rapid displacement of the original amine. On the basis of stoichiometry, fragmentation behavior, and reactivity, we conclude that the doubly charged complex of cucurbit[6]uril with 1,4-butanediammonium is a gas-phase pseudorotaxane.     

Near-infrared spectrophotometric determination of compositions of fullerene samples

A novel method has been developed for the sensitive and accurate determination of compositions of fullerene samples. The method is based on the synergistic use of spectrophotometric measurements and partial least square method. The method is not only simple, inexpensive and fast but also is non-destructive. Compositions of various fullerene samples including fullerite which is the precursor to C(60) and C(70), can be directly and non-destructively determined by this method without any time-consuming separation step as in the HPLC method or destruction as in the MS method.