The Extraction of Polycyclic Aromatic Hydrocarbons from Atmospheric Particulate Matter Samples by Accelerated Solvent Extraction (ASE)

Abstract

The Accelerated solvent extraction (ASE) of PAHs (23 2- to 6-ring species) spiked onto glass fibre filters (GFFs) was studied as a function of variable extraction solvents, pressure, temperature and extraction times. Acceptable recoveries (85% ± 15%) were obtained for certain combinations of conditions and a tentative method (1500 psi, 150°C, 70:30 hexane:acetone mixture, 7 min heat-up time, 5 min static extraction time, 60% flush volume, 2 static cycles was selected for further testing. However, this method did not prove as effective as the traditional Soxhlet method of extraction when these parameters were used to extract native PAHs from ambient atmospheric particulate matter collected on a GFF by Integrated Atmospheric Deposition Network (IADN) sampling protocols. The extraction recovery study for spiked GFFs was repeated using slightly different extraction conditions: 2000 psi, 100°C, 70:30 hexane:acetone, 5 min heat-up time, 5 min static extraction time, 150% flush volume, 3 static cycles. When this method was applied to the extraction of native PAHs from ambient atmospheric particulate matter collected on GFFs, the results showed equivalent or better recoveries to that of the Soxhlet method. The total time of extraction was 25 min requiring only 30 mL of solvent. This ASE method is presently used to quantitatively determine PAHs in IADN particle-phase samples.     

Ca-Mediated Synthetic Biosystems Offer Protein Design Versatility, Signal Specificity, and Pathway Rewiring

Synthetic biosystems have been engineered that enable control of metazoan cell morphology, migration, and death. These systems possess signal specificity, but lack flexibility of input signal. To exploit the potential of Ca²⁺ signaling, we designed RhoA chimeras for reversible, Ca²⁺-dependent control over RhoA morphology and migration. First, we inserted a calmodulin-binding peptide into a RhoA loop that activates or deactivates RhoA in response to Ca²⁺ signals depending on the chosen peptide. Second, we localized the Ca²⁺-activated RhoA chimera to the plasma membrane, where it responded specifically to local Ca²⁺ signals. Third, input control of RhoA morphology was rewired by coexpressing the Ca²⁺-activated RhoA chimera with Ca²⁺-transport proteins using acetylcholine, store-operated Ca²⁺ entry, and blue light. Engineering synthetic biological systems with input versatility and tunable spatiotemporal responses motivates further application of Ca²⁺ signaling in this field.     

CCR5 antagonists: 3-(pyrrolidin-1-yl)propionic acid analogues with potent anti-HIV activity

[reaction: see text] A novel approach to alpha,alpha-disubstituted-beta-amino acids (beta(2,2)-amino acids) was employed in the synthesis of a series of 3-(pyrrolidin-1-yl)propionic acids possessing high affinity for the CCR5 receptor and potent anti-HIV activity. The rat pharmacokinetics for these new analogues featured higher bioavailabilities and lower rates of clearance as compared to cyclopentane 1.     

Gas‐phase functionalized carbon‐carbon coupling reactions catalyzed by Ni (II) complexes

Gas‐phase C―C coupling reactions mediated by Ni (II) complexes were studied using a linear quadrupole ion trap mass spectrometer. Ternary nickel cationic carboxylate complexes, [(phen)Ni (OOCR¹)]⁺ (where phen = 1,10‐phenanthroline), were formed by electrospray ionization. Upon collision‐induced dissociation (CID), they extrude CO₂ forming the organometallic cation [(phen)Ni(R¹)]⁺, which undergoes gas‐phase ion‐molecule reactions (IMR) with acetate esters CH₃COOR² to yield the acetate complex [(phen)Ni (OOCCH₃)]⁺ and a C―C coupling product R¹‐R². These Ni(II)/phenanthroline‐mediated coupling reactions can be performed with a variety of carbon substituents R¹ and R² (sp³, sp², or aromatic), some of them functionalized. Reaction rates do not seem to be strongly dependent on the nature of the substituents, as sp³‐sp³ or sp²‐sp² coupling reactions proceed rapidly. Experimental results are supported by density functional theory calculations, which provide insights into the energetics associated with the C―C bond coupling step.     

Diphospha-Ureas from the Phosphaketene Ph3GePCO

The phosphaketene Ph₃GePCO is shown to react with the phosphide KP(tBu)₂ to generate the anion [Ph₃GePC(O)P(tBu)₂]⁻ 1 . This species reacts with CH₃I or ClGePh₃ to give the dissymmetric diphospha-ureas (tBu)₂PC(O)P(GePh₃)(CH₃) 2 and (Ph₃Ge)₂PC(O)P(tBu)₂ 3 respectively. Sequential treatment of 2 with a base and CH₃I affords a route to (tBu)₂PC(O)P(CH₃)₂ 5 . These species are products of the first modular diphospha-urea synthesis. The subsequent thermal and photochemical reactivity of these species was also probed and described.     

Synthesis and crystallization behavior of rigid copolyesters with biphenyl‐4,4′‐dicarboxylate and 2,6‐naphthalenedicarboxylate in the main chain

Structurally rigid copolyester thermoplastics were synthesized from 1,4‐cyclohexanedimethanol and the diesters dimethyl biphenyl‐4,4′‐dicarboxylate and dimethyl 2,6‐naphthalenedicarboxylate (DMN) via conventional melt transesterification. Conventional differential scanning calorimetry (CDSC) showed all compositions to exhibit multiple endotherms upon heating. Wide‐angle X‐ray diffraction analysis showed copolyester compositions to exhibit the crystalline structure of either the homopolyester Poly(1,4‐cyclohexylenedimethylene 2,6‐naphthalate) (PCN) or the homopolyester Poly(1,4‐cyclohexylenedimethylene 4,4′‐bibenzoate) (PCB), but not both simultaneously. Further thermal analysis using CDSC and fast DSC investigated the origin of the multiple endotherm behavior. While three endotherms are observed for low heating rates, the upper two endotherms appear to merge at heating rates about 1–5 °C s^?1 and a single endotherm remains above heating rates about 10–50 °C s^?1. While the behavior of the upper two endotherms is undeniably consistent with the mechanism of melting–recrystallization–remelting (MRR), we suggest that the low endotherm is likely associated with the melting of constrained secondary crystals, although MRR effects cannot be ruled out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 973–980     

High iso Aldehyde Selectivity in the Hydroformylation of Short‐Chain Alkenes

The hydroformylation of propene to give predominantly iso‐butanal has been achieved; class‐leading selectivity is possible even at higher temperatures that deliver fast conversion. Racemic rhodium complexes of bidentate phospholane phosphites derived from tropos‐biphenols and unusual solvent systems are the key to the selectivity observed.     

Using molecular dynamics simulations to identify the key factors responsible for chiral recognition by an amino acid-based molecular micelle

Molecular dynamics (MD) simulations were used to investigate the binding of six chiral compounds to the amino acid-based molecular micelle (MM) poly-(sodium undecyl-(L)-leucine-leucine) or poly(SULL). The MM investigated is used as a chiral selector in capillary electrophoresis. The project goal was to characterize the chiral recognition mechanism in these separations and to move toward predictive models to identify the best amino acid-based MM for a given separation. Poly(SULL) was found to contain six binding sites into which chiral compounds could insert. Four sites had similar sizes, shapes, and electrostatic properties. Enantiomers of alprenolol, propranolol, 1,1′-bi-2-naphthyl-2,2′-diyl hydrogen phosphate, 1,1′-bi-2-naphthol, chlorthalidone, or lorazepam were separately docked into each binding pocket and MD simulations with the resulting intermolecular complexes were performed. Solvent-accessible surface area calculations showed the compounds preferentially associated with binding sites where they penetrated into the MM core and shielded their non-polar atoms from solvent. Furthermore, with five of the six compounds the enantiomer with the most favorable free energy of MM association also experienced the most favorable intermolecular hydrogen bonding interactions with the MM. This result suggests that stereoselective intermolecular hydrogen bonds play an important role in chiral discrimination in separations using amino acid-based MMs.GRAPHICAL ABSTRACT     

Synthetic studies towards the penicisulfuranols: Synthesis of an advanced spirocyclic diketopiperazine intermediate

The 2,5-diketopiperazine (DKP) moiety is a core feature of many natural products and medicinally relevant scaffolds. As part of our efforts directed towards a total synthesis of penicisulfuranol B, we have developed and report herein: (1) the preparation of an N-hydroxy diketopiperazine intermediate accessible via a molybdenum-mediated oxidation of a parent diketopiperazine, and (2) further synthetic studies leading to a novel spirocyclic dihydrobenzofuran-containing diketopiperazine.     

More QACs,more questions: Recent advances in structure activity relationships and hurdles in understanding resistance mechanisms

Quaternary ammonium compounds (QACs) are a class of antimicrobials that have been around for over a century; nevertheless, they have found continued renewal in the structures to which they can be appended. Ranging from antimicrobial polymers to adding novel modes of action to existing antibiotics, QACs have found ongoing use due to their potent properties. However, resistance against QACs has begun to emerge, and the mechanism of resistance is still only partially understood. In this review, we aim to summarize the current state of the field and what is known about the mechanisms of resistance so that the QACs of the future can be designed to be evermore efficacious and utilized to unearth the remaining mysteries that surround bacteria’s resistance to them.