Elemental analysis of Korean women’s blood serums using instrumental neutron activation analysis

Instrumental neutron activation analysis was used to assess the concentration of the inorganic trace elements in Korean women’s blood serums. It was found that a high concentration of Na and Cl incurs an analytical interference, but the 12 elements such as Br, Ca, Cl, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn could be determined under the condition of an interference minimization. Serum samples collected from 63 women were analyzed and the concentration level and range of the elements were evaluated. NIST SRMs were analyzed simultaneously for quality control. The average values of the Na and Cl determined in the serum samples were 3,365 and 3,533 mg/l, Ca was 96.4 mg/l and K was 191 mg/l. Besides, Br, Se and Zn have a concentration level of 6.46, 0.13 and 0.98 mg/l, respectively. It was found that there is no significant difference between the present values and the reported values.     

An evaluation of the performance of porous polymer monolith assisted electrospray

A novel electrospray interface, which has distinct advantages over conventional pulled silica emitters, has been developed. This novel interface can be easily fabricated by forming a porous polymer monolith (PPM) at the end of a fused-silica capillary that facilitates a stable electrospray over a wide range of flow rates with only a modest increase in back-pressure. A comparison was made between the PPM-assisted electrospray and a commercial nanosprayer in terms of sensitivity, stability and robustness. A PPM-filled electrospray tip produced a day-to-day signal variation of 23% relative standard deviation (RSD) over a 3-day period when spraying a 1.0 microM test peptide solution. Furthermore, three different capillaries fabricated by the same process produced a signal variation of 17% RSD, indicating that the fabrication process shows good reproducibility. The multiple flow paths of the PPM function to split the flow and reduce clogging. Even following the accumulation of debris after prolonged use, a stable spray could still be generated with the PPM-filled capillary while the commercial nanosprayer ceased to function properly. In terms of sensitivity, PPM-assisted electrospray showed an enhancement in sensitivity at infusion flow rates between 100 to 1000 nL/min while commercial nanosprayers performed slightly better at flow rates below 100 nL/min. A sample purification step can be combined with the PPM-assisted sprayer, using the PPM as a stationary phase to desalt and preconcentrate samples prior to mass spectrometric detection.     

Syntheses of 1beta-methylcarbapenems bearing 5-methyl-4-hydroxypyrrolidinone

A new series of 1beta-methylcarbapenems 1a-d bearing 5-methyl-4-mercaptopyrrolidinone rings has been prepared and evaluated for in vitro antibacterial activity and pharmacokinetic parameters. Most compounds showed excellent antibacterial activity and high stability to dehydropeptidase-1. We have synthesized optically active 5-methyl-4-hydroxypyrrolidinones from enantiomerically pure aziridine esters.     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

A new method for the generation of isobenzofurans: A simple entry to substituted naphthalenes

5,6-Dimethoxy isobenzofuran is generated $\text{in situ}$ from the dimethylacetal of 6-hydroxymethyl veratraldehyde and intercepted by a variety of dienophiles to produce the expected oxygen-bridged adducts in good yield. Many of the latter are easily aromatised to naphthalenes.     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.     

Single step synthesis of propionitrile over K/MgO from acetonitrile methylation with methanol

A series of potassium-doped MgO catalysts loaded with KOH up to 15 mol% was prepared and evaluated for a single step synthesis of propionitrile from acetonitrile methylation with methanol. As the amount of potassium dope increased, both the acetonitrile conversion and the selectivity toward propionitrile increased. Based on the activity data coupled with CO₂-TPD and NH₃-IR ones, it was concluded that potassium doping to MgO resulted in the enhancement of both basicity and bifunctionality — methylation and hydrogenation.     

Synthesis of Hexa-O-Methyl-8-(8“-Naringeninyl)Apigenin

The title compound was prepared from 8-iodo-5,7,4′-trimethoxyflavone and 8-iodo-5,7,4′-trimethoxyflavanone using modified condition for the Ullmann condensation.     

Polyarylates. III. Kinetic studies of interfacial polycondensation

The kinetics of interfacial polycondensation of bisphenol A with isophthaloyl chloride and terephthaloyl chloride in dichloromethane with triethylbenzylammonium chloride (TEBAC) as the catalyst was investigated via measurements of bisphenolate concentration by UV. The reaction was found to be second order with respect to bisphenolate. The dependence of the rate constant on stirring speed, amount of TEBAC, and reaction temperature was studied. The rate constant was increased with an increase of stirring speed, quantity of TEBAC added, as well as the reaction temperature. The activation energy was found to be 7.7 kcal/mol at a stirring speed of 700 rpm in the presence of 0.160 of TEBAC. The role of TEBAC was found to be interesting. It did not alter the equilibrium (the partition coefficient remained the same in the presence of TEBAC), but it did enhance the transfer rate of bisphenolate.     

Phage-display selection of a human single-chain fv antibody highly specific for melanoma and breast cancer cells using a chemoenzymatically synthesized G(M3)-carbohydrate antigen

Overexpression of the cell-surface glycosphingolipid G(M3) is associated with a number of different cancers, including those of the skin, colon, breast, and lung. Antibodies against the G(M3) epitope have potential application as therapeutic agents in the treatment of these cancers. We describe the chemoenzymatic synthesis of two G(M3)-derived reagents and their use in the panning of a phage-displayed human single-chain Fv (scFv) antibody library derived from the blood of cancer patients. Three scFv-phage clones, GM3A6, GM3A8, and GM3A15, were selected for recombinant expression and were characterized using BIAcore and flow cytometry. BIAcore measurements using the purified, soluble scFvs yielded dissociation constants (K(d)) ranging from 4.2 x 10(-7) to 2.1 x 10(-5) M. Flow cytometry was used to evaluate the ability of each scFv to discriminate between normal human cells (human dermal fibroblast, HDFa), melanoma cells (HMV-1, M21, and C-8161), and breast cancer cells (BCM-1, BCM-2, and BMS). GM3A6 displayed cross-reactivity with normal cells, as well as tumor cells, and GM3A15 possessed little or no binding activity toward any of the cell lines tested. However, GM3A8 bound to five of the six tumor cell lines and showed no measurable reactivity against the HDFa cells. Hence, we have demonstrated that a synthetic G(M3) panning reagent can be used to isolate a fully human scFv that is highly specific for native G(M3) on the surface of tumor cells. The result is a significant step toward effective immunotherapies for the treatment of cancer.