Palladium(II)-catalyzed isomerization of olefins with tributyltin hydride

A new efficient method for the synthesis of geometrically pure (E)-alkenes from (Z)-alkenes is described. The reaction of aryl- or alkyl-substituted (Z)-alkenes with tributyltin hydride and triethylamine in the presence of a catalytic amount of palladium acetate afforded the corresponding (E)-alkenes in good yields.     

New chain-extended analogues of salacinol and blintol and their glycosidase inhibitory activities. Mapping the active-site requirements of human maltase glucoamylase

The synthesis of new chain-extended sulfonium and selenonium salts of 1,4-anhydro-4-thio-(or 4-seleno)-d-arabinitol, analogues of the naturally occurring glycosidase inhibitor salacinol, is described. Nucleophilic attack at the least hindered carbon atom of 4,6-O-benzylidene-2,5-di-O-p-methoxybenzyl-d-mannitol-1,3-cyclic sulfate by 2,3,5-tri-O-p-methoxybenzyl-1,4-anhydro-4-thio-(or 4-seleno)-d-arabinitol gave the sulfonium and selenonium sulfates, respectively. Subsequent deprotection with trifluoroacetic acid yielded the target compounds. In these analogues, an extended polyhydroxylated aliphatic side chain has been incorporated while maintaining the stereochemistry of C-2' and C-3' of salacinol or blintol. These compounds were designed to probe the premise that they would bind with higher affinity to glucosidases than salacinol because the extra hydroxyl groups in the acyclic chain would make favorable polar contacts within the active site. Both target compounds inhibited recombinant human maltase glucoamylase, one of the key intestinal enzymes involved in the breakdown of glucose oligosaccharides in the small intestine, with Ki values in the low micromolar range. Comparison of these values to those of related compounds synthesized in previous studies has provided a better understanding of structure-activity relationships and the optimal stereochemistry at the different stereogenic centers required of an inhibitor of this enzyme. With respect to chain extension, the configurations at C-2' and C-4' are critical for activity, the configuration at C-3', bearing the sulfate moiety, being unimportant. The desired configuration at C-5' is also specified. However, comparison of the activities of the chain-extended analogues with those of salacinol and blintol indicates that there is no particular advantage of the chain-extension relative to salacinol or blintol. These results are similar to those reported earlier for kotalanol, a 7-carbon-extended derivative, versus salacinol against rat intestinal maltase, sucrase, and isomaltase.     

2-dimensional analytic approach for anion differentiation with chromofluorogenic receptors

By linking the urea moiety at the 1,8 positions of the carbazole fragment, we synthesized host systems 1, 2, and 3 having both chromogenic and fluorogenic signaling subunits. The spectral changes in both the signaling subunits could be easily analyzed via a simple 2-dimensional (2D) analytic approach described here, which enables us to differentiate the given set of anions. Structural studies are also reported.     

Electrical transport characteristics of surface-conductance-controlled, dielectrophoretically separated single-walled carbon nanotubes

Alternating current dielectrophoresis has attracted considerable attention as a possible candidate to separate single-walled carbon nanotubes according to electronic types. Recently, the significant effect of surface charge on the polarizability of semiconducting nanotubes was demonstrated using comparative Raman spectroscopic studies. Here we present electrical transport characteristics of surface-charge-controlled, dielectrophoretically deposited nanotube arrays. The surface charge was controlled using cationic/anionic surfactant mixtures. Complete separation between metallic and semiconducting species was achieved at the electric field frequency of 10 MHz only when the surface charge of nanotubes was neutralized, which is consistent with previous Raman investigation. A theoretical analysis, using zeta potential information as input, further supported the experimental observation.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.     

Electrochemical scanning tunneling microscopic observation of the preoxidation process of CO on Pt(111) electrode surface

Presented are sequential images of CO on Pt(111), observed with electrochemical scanning tunneling microscopy, during its electrochemical preoxidation process. In the course of the well-known phase transition from the (2 x 2)-3CO-alpha structure to the (radical 19 x radical 19)R23.4 degrees-13CO structure, various structures were observed: (2 x 2)-3CO-beta (Chem. Comm. 2006, 2191-2193), (1 x 1)-CO, and (radical 13 x radical 13)R46.1 degrees-9CO. Based on an analysis of the populations of the structures averaged over imaging time and imaged location at the preoxidation potential range (0-0.25 V vs Ag/AgCl), the structures of CO domains changed sequentially in the order of (2 x 2)-3CO-alpha, (2 x 2)-3CO-beta, (1 x 1)-CO, (radical 13 x radical 13)R46.1 degrees-9CO, and (radical 19 x radical 19)R23.4 degrees-13CO as the potential shifted from 0 to 0.25 V. Such a sequential structural change demonstrates that the structures of (2 x 2)-3CO-beta, (1 x 1)-CO, and (radical 13 x radical 13)R46.1 degrees-9CO are transient ones during the preoxidation of CO on Pt(111). Discussed are the transient structures in terms of various aspects, such as the absence of CO in solution and the origin of compressed structures.     

15N/14N Analysis of Amino Acids with GC-C-IRMS - Methodical Investigations and Ecotoxicological Applications

Abstract

In order to perform the ¹⁵N/¹⁴N analysis of amino acids using a gas chromatograph and isotope ratio mass spectrometer linked up via a combustion interface (GC-C-IRMS), the amino acids must be derivatized. Tert-butyldimethylsilylation is examined using various techniques (direct conversion to nitrogen gas, ConFlo-IRMS [1], GC-C-IRMS [2]) and subsequently applied to isotopic characterization of amino acids from wheat protein hydrolyzate obtained from plants exposed to ozone. The method provides a reliable tool for studying ecotoxicological effects on plants at a molecular level in addition to the investigation of the natural variations of different N fractions.     

Modeling of Ethylene Polymerization Kinetics over Supported Chromium Oxide Catalysts

Summary: Silica supported chromium oxide catalysts have been used for many years to manufacture polyethylene and they still account for more than 50% of world production of high‐density polyethylene. Along with its commercial success, the catalytic mechanism and polymerization kinetics of silica supported chromium oxide catalysts have been the subject of intense research. However, there is a lack of modeling effort for the quantitative prediction of polymerization rate and polymer molecular weight properties. The chromium oxide catalyzed ethylene polymerization is often characterized by the presence of an induction period followed by a steady increase in polymerization rate. The molecular weight distribution is also quite broad. In this paper, a two‐site kinetic model is developed for the modeling of ethylene polymerization over supported chromium oxide catalyst. To model the induction period, it is proposed that divalent chromium sites are deactivated by catalyst poison and the reactivation of the deactivated chromium sites is slow and rate controlling. To model the molecular weight distribution broadening, each active chromium site is assumed to have different monomer chain transfer ability. The experimental data of semibatch liquid slurry polymerization of ethylene is compared with the model simulations and a quite satisfactory agreement has been obtained for the polymerization conditions employed.

Polymerization rates at different reaction temperatures: symbols – data, lines – model simulations.     

The role of resolved virtual photons in the production of forward jets at HERA

The measurement of forward jet cross sections has been suggested as a promising probe of new small x parton dynamics and the question is whether the new HERA data provide an indication of this. In this paper the influence of resolved photon processes has been investigated and it has been studied to what extent the inclusion of such processes in addition to normal deep inelastic scattering leads to agreement with data. It is shown that two DGLAP evolution chains from the hard scattering process towards the proton and the photon respectively, are sufficient to describe effects observed in the HERA data, which have been attributed to BFKL dynamics. Received: 11 March 1999 / Published online: 18 June 1999     

Optical and Electrical Properties of the PLT Films with Various Compositions Deposited by Sol-Gel Process

In order to study optical and electrical properties of (Pb_1-xLa_x)TiO₃ (PLT) films with varying La concentration, the PLT films were deposited by sol-gel process. X-ray diffraction revealed that a pseudocubic phase of the PLT film became dominant with increasing La concentration due to decrease of lattice constant of c-axis. Three-dimensional atomic force microscopy images showed that the grain size and root mean square surface roughness decreased by addition of La. The optical band gap of the PLT films became wider when Pb was substituted with La. The addition of La increased the transparency of the PbTiO₃ film and shifted the threshold for initiation of absorption to shorter wavelength. Hysteresis loops of the PLT films showed that remanent polarization and coercive field decreased with increasing La concentration. In addition, we modified the surface of the PLT film with La concentration of 5% using a keV oxygen ion beam at different doses. The optical band gap of the PLT film was changed by the oxygen ion beam irradiation although the XRD patterns and the transmittance values were not significantly changed. In measuring AFM images of the surface of modified PLT film, significant changes of the grain shape and size were not found. Moreover, polarization and dielectric constant were not changed after oxygen ion irradiation. These results suggested that addition of La could affect the optical and electrical properties of the PbTiO₃ and PLT films and that surface modification by oxygen ion beam modification with 1 keV energy can change the surface property but not bulk property.