Quantitative and qualitative assessment of articular cartilage in the goat knee with magnetization transfer imaging

We investigated the role of collagen in the magnetization transfer (MT) effect in contrast to other macromolecules. By means of phantoms made of collagen, chondroitin sulfate (CS) and albumin, MR parameters have been optimized in order to reduce the acquisition time and improve the sensitivity, as well as to minimize the contributions from CS and albumin to the MT induced signal attenuation. The same method was used to study cartilage ex vivo (bovine articular and nasal cartilage plugs) and in vivo (goat knee femoral chondyle). In phantom samples, the MT signal attenuation depended on the collagen concentration while contributions from the other macromolecules were found to be minimal. In average, analysis of MT images revealed a 25%, 35% and 30% signal attenuation in 10% w/v type I collagen gels, cartilage plugs, and cartilage from the weight-bearing areas of the goat knee, respectively. Biochemical data revealed that treatment of cartilage plugs with bacterial collagenase led to collagen depletion and correspondingly to a decrease of the MT response. In contrast, trypsin-induced proteoglycan loss in cartilage plugs did not alter the MT effect. A significant correlation was observed between the collagen content in these plugs and their respective MT ratios and the rate constant k for the exchange process bound versus free water. Finally, data obtained from in vivo MT measurement of the goat knee demonstrated that intra-articular injection of papain might not only cause degradation of proteoglycans but also a change in collagen integrity in a dose-dependent manner. We conclude that in vivo measurement of MT ratios gives quantitative and qualitative information on the collagen status and may be applied for the routine evaluation of normal and abnormal articular cartilage.     

The Stability of Flows in a Differentially Heated Rotating Fluid System with Rigid Bottom and Free Top

The stability of certain steady flows in a rotating system with rigid bottom and free top surfaces is investigated. The simplest flow states having the essential spatial variations of steady responses of a rotating fluid system to differential heating in the horizontal are studied, that is, those with a constant gradient temperature distribution with both horizontal and vertical components, and the accompanying Coriolis-balanced constant velocity shear (thermal wind). Ekman boundary layers and intermediate boundary layers are encountered in a systematic asymptotic analysis in two small parameters, the Ekman number and an inverse Richardson number. The resulting neutral stability curves indicate the possibility of instabilities above the inviscid stability criterion due to Eady, for some mean flow configurations. The estimate of the critical Taylor number is numerically close to the values obtained in the most nearly applicable experiments.     

Potential carry-over effect in the measurement of induced loudness reduction

The majority of studies on induced loudness reduction (ILR) use an experimental paradigm that results in an underestimation of the amount of ILR. Most of those studies utilize loudness matches between tones of two different frequencies (a test tone and a comparison tone) with (experimental condition) and without (baseline condition) an inducer tone at the test frequency. The change in level of the comparison tone between the baseline and experimental conditions is the amount of ILR. In those experiments, the level of the comparison tone in the baseline condition tends to be substantially higher (often about 10 dB) than in the experimental condition. Because of this level difference, exposure to the baseline condition immediately prior to the experimental condition causes unintended ILR for the comparison tone. In this study, the delay between the baseline and experimental conditions was varied and it was determined that the amount of ILR is underestimated by about 30% and the variability is increased when the experimental condition is run immediately after the baseline condition. A second experiment using a Békésy-tracking procedure showed that ILR maximizes rapidly upon exposure to an inducer and decays over the course of several minutes after the inducer is removed.     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

EBC-232 and 323: A Structural Conundrum Necessitating Unification of Five In Silico Prediction and Elucidation Methods

Structurally unique halimanes EBC-232 and EBC-323, isolated from the Australian rainforest plant Croton insularis, proved considerably difficult to elucidate. The two diastereomers, which consist an unusual oxo-6,7-spiro ring system fused to a dihydrofuran, were solved by unification and consultation of five in silico NMR elucidation and prediction methods [i.e., ACDLabs, olefin strain energy (OSE), DP4, DU8+ and TD DFT CD]. Structure elucidation challenges of this nature are prime test case examples for empowering future AI learning in structure elucidation.     

Rapid Discrimination of Crystal Handedness by X-ray Natural Circular Dichroism (XNCD) Mapping

An original method for determining the handedness of individual non-centrosymmetric crystals in a mixture using a tightly-focused, circularly polarized X-ray beam is presented. The X-ray natural circular dichroism (XNCD) spectra recorded at the metal K-edge on selected crystals of [Δ-M(en)₃](NO₃)₂ and [Λ-M(en)₃](NO₃)₂ (M=Co^II, Ni^II) show extrema at the metal pre-edge (7712 eV for Co, 8335 eV for Ni). A mapping of a collection of some 220 crystals was performed at the respective energies by using left and right circular polarizations. The difference in absorption for the two polarizations, being either negative or positive, directly yielded the handedness of the crystal volume probed by the beam. By using this technique, it was found that the addition of l -ascorbic acid during the synthesis of [Co(en)₃](NO₃)₂ resulted in an enantiomeric enrichment of the Λ-isomer of 67±13 %, whereas the Ni analogue was similarly, but conversely, enriched in the Δ-isomer (65±22 %).     

The development and validation of a novel LC–MS/MS method for the quantification of cenicriviroc in human plasma and cerebrospinal fluid

A high-performance liquid chromatography tandem mass spectrometric method was developed and validated for cenicriviroc (CVC) quantification in human plasma and cerebrospinal fluid (CSF). The method involved precipitation with acetonitrile and injecting supernatants onto the column. Separation was achieved on an XBridge C₁₈ column with a gradient elution of 0.1% formic acid in water and acetonitrile. Analyte detection was conducted in positive ion mode using selected reaction monitoring. The m/z transitions were: CVC (697.3 → 574.3) and CVC-d7 (704.4 → 574.3). Calibration curve ranged from 5 to 1000 ng/mL for plasma and from 0.241 to 15.0 ng/mL for CSF. The intra- and inter-day precision and accuracy were <15% for both plasma and CSF across four different concentrations. CVC recovery from plasma and artificial CSF was >90%. The method was utilized for the measurement of patients’ plasma and CSF samples taking a dose of 50, 150 and 300 mg q.d.     

Spherical and tubular dimyristoylphosphatidylcholine liposomes

Journal of Thermal Analysis and Calorimetry - A physicochemical study of the interaction of pinocembrin with dimyristoylphosphatidylcholine (DMPC) liposomes was carried out. Unilamellar vesicles of...     

Electron transfer at different electrode materials: Metals,semiconductors, and graphene

Electron transfer reactions are the most important processes at electrochemical interfaces. They are determined by the interplay between the interaction of the reactant with the solvent and the electronic levels of the electrode surface. Theoretical treatments only based on Density Functional Theory calculations are not sufficient. This review emphasizes mainly the effect of the electronic structure of the electrode material on electron transfer under different kinetic regimes. Our goal is to understand experimental results in the framework of a theory valid for arbitrary strengths of electronic coupling.