Optical tweezers applied to a microfluidic system

We will demonstrate how optical tweezers can be combined with a microfluidic system to create a versatile microlaboratory. Cells are moved between reservoirs filled with different media by means of optical tweezers. We show that the cells, on a timescale of a few seconds, can be moved from one reservoir to another without the media being dragged along with them. The system is demonstrated with an experiment where we expose E. coli bacteria to different fluorescent markers. We will also discuss how the system can be used as an advanced cell sorter. It can favorably be used to sort out a small fraction of cells from a large population, in particular when advanced microscopic techniques are required to distinguish various cells. Patterns of channels and reservoirs were generated in a computer and transferred to a mask using either a sophisticated electron beam technique or a standard laser printer. Lithographic methods were applied to create microchannels in rubber silicon (PDMS). Media were transported in the channels using electroosmotic flow. The optical system consisted of a combined confocal and epi-fluorescence microscope, dual optical tweezers and a laser scalpel.     

Speciation in the aqueous H+/H2VO4-/H2O2/picolinate system relevant to diabetes research

A detailed study of the quaternary aqueous H+/H2VO4-/H2O2/picolinate (Pi-) system has been performed at 25 degrees C in 0.150 M Na(Cl) medium using quantitative 51 V NMR (500 MHz) and potentiometric data (glass electrode). In the ternary H+/H2VO4-/Pi- system, six complexes have been found in the pH region 1-10. In the quaternary H+/H2VO4-/H2O2/Pi- system, eight additional complexes have been found. Generally, equilibria are fast in both systems. The rate of peroxide decomposition depends on the species in solution. Chemical shifts, compositions and formation constants for the species are given. Equilibrium conditions and the fit of the model to the experimental data are illustrated in distribution diagrams. Possible formation of mixed ligand species with imidazole, lactic acid and citric acid have been investigated and ruled out under the same experimental conditions. Structural proposals are given, based on 1)C NMR data and available crystal structures.     

Automated high-capacity sorption probe for extraction of organic compounds in aqueous samples followed by gas chromatographic analysis

An automated high-capacity sorption device for GC analysis of ultra trace components has been developed. The scope of the presented technique was to combine the simplicity of solid-phase microextraction (SPME) with the high extraction efficiency of the stir bar sorptive extraction technology. Sorptive extractions of water samples were performed using polydimethylsiloxane (PDMS) rubber tubing (120 microl) mounted onto a glass rod. The sampling procedure was carried out by a robotic autoinjector. Since the setup is fully automated, unattended and precise time-controlled extraction of samples is possible and makes quantitation with non-equilibrium extractions feasible. The sorption probes are easy to exchange, which facilitates off-line/in-field sampling. The system was evaluated with a test mixture of 44 environmentally hazardous compounds. Detection limits were found to be in the sub-ppt region. The performance of the system was demonstrated with the analysis of polycyclic aromatic hydrocarbons in urban snow.     

Reactions of lignin in chlorine dioxide bleaching of kraft pulps

The reactions between chlorine dioxide and the residual lignin in oxygen-bleached softwood kraft pulps have been studied. In a first series, isolated lignin samples have been subjected to chlorine dioxide oxidation at different pH values and subsequently analysed by oxidative degradation and elemental analysis. Different analytical techniques have also been employed to follow the gradual chemical changes in lignins isolated from kraft pulps after each of the bleaching stages in the OD(EOP)DD sequence. The results demonstrate that, in order to minimize chlorination of the lignin, the first chlorine dioxide stage should be carried out at a pH around or above three. At this pH level, a high degree of lignin oxidation is also achieved. A certain (mono)-chlorination of the lignin in the first D stage cannot be avoided, but this chlorine is to a large extent removed in the later bleaching stages. The efficient and non-selective oxidation of the various phenolic lignin end groups by chlorine dioxide is clearly illustrated by the analytical data. Moreover,¹³C NMR reveals that reduced lignin structures formed during the kraft cook survive the oxidative bleaching stages to a large extent.     

A Convenient and Selective Palladium‐Catalyzed Aerobic Oxidation of Alcohols

An efficient procedure for the oxidation of primary and secondary alcohols to aldehydes and ketones, respectively, with molecular oxygen under ambient conditions has been achieved. By applying catalytic amounts of Pd(OAc)₂ in the presence of tertiary phosphine oxides (O?PR₃) as ligands, a variety of substrates are selectively oxidized without formation of ester byproducts. Spectroscopic investigations and DFT calculations suggest stabilization of the active palladium(II) catalyst by phosphine oxide ligands.     

A microfluidic system enabling Raman measurements of the oxygenation cycle in single optically trapped red blood cells

Using a lab-on-a-chip approach we demonstrate the possibility of selecting a single cell with certain properties and following its dynamics after an environmental stimulation in real time using Raman spectroscopy. This is accomplished by combining a micro Raman set-up with optical tweezers and a microfluidic system. The latter gives full control over the media surrounding the cell, and it consists of a pattern of channels and reservoirs defined by electron beam lithography that is moulded into rubber silicon (PDMS). Different buffers can be transported through the channels using electro-osmotic flow, while the resonance Raman response of an optically trapped red blood cell (RBC) is simultaneously registered. This makes it possible to monitor the oxygenation cycle of the cell in real time and to investigate effects like photo-induced chemistry caused by the illumination. The experimental set-up has high potential for in vivo monitoring of cellular drug response using a variety of spectroscopic probes.     

Microscale sample deposition onto hydrophobic target plates for trace level detection of neuropeptides in brain tissue by MALDI-MS

A sample preparation method that combines a modified target plate with a nanoscale reversed-phase column (nanocolumn) was developed for detection of neuropeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A gold-coated MALDI plate was modified with an octadecanethiol (ODT) self-assembled monolayer to create a hydrophobic surface that could concentrate peptide samples into a approximately 200-500-microm diameter spot. The spot sizes generated were comparable to those obtained for a substrate patterned with 200-microm hydrophilic spots on a hydrophobic substrate. The sample spots on the ODT-coated plate were 100-fold smaller than those formed on an unmodified gold plate with a 1-microl sample and generated 10 to 50 times higher mass sensitivity for peptide standards by MALDI-TOF MS. When the sample was deposited on an ODT-modified plate from a nanocolumn, the detection limit for peptides was as low as 20 pM for 5-microl samples corresponding to 80 amol deposited. This technique was used to analyze extracts of microwave-fixed tissue from rat brain striatum. Ninety-eight putative peptides were detected including several that had masses matching neuropeptides expected in this brain region such as substance P, rimorphin, and neurotensin. Twenty-three peptides had masses that matched peaks detected by capillary liquid chromatography with electrospray ionization MS.     

Thin-layer chromatography combined with diode laser desorption/atmospheric pressure chemical ionization mass spectrometry

The desorption of an analyte by a continuous wave diode laser from a porous surface of a thin-layer plate covered with a graphite suspension is presented. The thermally desorbed analyte molecules are ionized in the gas phase by a corona discharge at atmospheric pressure. Therefore, both essential processes--the desorption and the ionization of analyte molecules, which are often performed in one step--are separated. The target preparation is easy and fast since no additional extraction process is required. The mass spectrometric background signal was mostly limited to the low mass range showing no interference with typical compounds of interest. In this study, the calmative and antihypertensive drug reserpine was chosen as model analyte, which is often used for specification of mass spectrometers. No fragmentation was observed because of efficient collisional cooling under atmospheric pressure. The influence of diode laser power and the composition of the graphite suspension were investigated, and a primary optimization was performed.