Cylindrospermopsin determination using 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) as the internal standard

Cylindrospermopsin (CYN) was determined by liquid chromatography/electrospray ionization-mass spectrometry (LC/ESI-MS) using 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) as the internal standard. In the selected ion monitoring of LC/ESI-MS, m/z 414 for CYN and 237 for HEPES were monitored using the negative mode; the retention times of CYN and HEPES were 12.41 and 14.21 min, respectively. CYN was determined from peak area ratios of m/z 414/237. By the treatment of an anion exchange cartridge using a buffer at pH 10.5, CYN was isolated and condensed. No interfering peak was observed. Linearity of this method was observed at the range of 0.10-31.12 ng. Total coefficients of variation were 5.1 and 2.9% at 104 and 1038 μg CYN L⁻¹. The quantitative limit at a signal-to-noise (S/N) ratio of 10 was 0.16 ng.CYN concentration in natural waters is low. CYN in waters should be condensed for determination. This method including the treatment for isolation and condensation of CYN is useful for determination of CYN in environmental and/or drinking waters.     

Heavy metal contamination in street dusts of Istanbul (Pendik to Levent) E-5 highway

Street dust composition is an important environmental parameter that should be considered in investigations of environmental pollution originating from traffic. In this study, fifty-six samples of street dusts were collected during the period December 2003-April 2004 from Pendik to Levent on E-5 highway in Istanbul, Turkey. Analyses were determined by graphite furnace atomic absorption spectrometry after digestion using USEPA, 1996 (Method 3050B). The mean concentration levels of Pb, Mn, Zn, Ni, Cd and Cu were found to be 368.3, 747.8, 431.2, 27.1, 0.3 and 191.1 microg/g respectively. Pb, Cu, Zn and Mn mean concentrations in studied areas were higher than levels of these heavy metals according to USEPA (1992) and Republic of Turkey Ministry of Environment and Foresty (2003). Highly significant correlations except for Mn were found between the number of vehicles and heavy metal concentrations.     

Synthesis of oxazoline functionalized polypropene using metallocene catalysts

Using two different zirconocene/MAO catalyst systems, propene was copolymerized with the comonomers 2‐(9‐decene‐1‐yl)‐1,3‐oxazoline and 2‐(4‐(10‐undecene‐1‐oxo)phenyl)‐1,3‐oxazoline, respectively. The catalysts used were rac‐Et[Ind]₂ZrCl₂ and rac‐Me₂Si[2‐Me‐4, 5‐BenzInd]₂ZrCl₂. Up to 0.53 mol‐% oxazoline could be incorporated into polypropene. Oxazoline content, molecular weight, degree of isotacticity and melting behavior were dependent on the catalyst system, comonomer structure and comonomer concentration in the feed.     

A fluorescence study on critical exponents during sol-gel phase transition in complex monomeric systems

Methyl methacrylate (MMA), ethyl methacrylate (EMA) and various combinations of MMA with EMA were used during FCC experiments. Pyrene (P_y) was introduced as a fluorescence probe and fluorescence lifetimes from its decay traces were measured during sol-gel phase transitions. The fast transient fluorescence (FTRF) technique was used to study the critical exponents during sol-gel phase transition in free-radical crosslinking copolymerization (FCC). The results were interpreted in the view of percolation theory. The critical exponents of gel fraction, β and weight average degree of polymerization, γ were measured near the point of gel effect and found to be around 0.37 ± 0.015 and 1.69 ± 0.05 in all systems studied respectively.     

Spherical neutron polarimetry studies on the magnetic structure of single crystal Cr1−xMoxB2 (x=0, 0.15)

By applying spherical neutron polarimetry technique to Cr_1−xMo_xB₂ (x=0, 0.15), we successfully determined its precise magnetic structures. We emphasize here that the ratio of magnetic component was determined by measuring the two satellite reflections and rotating the incident neutron spin directions.     

Hamiltonian map approach to 1D Anderson model

A one-dimensional diagonal tight binding electronic system is analyzed with the Hamiltonian map approach to study analytically the inverse localization length of an infinite sample. Both the uncorrelated and the dichotomic correlated random potential sequences are considered in the evaluations of the inverse localization length. Analytical expressions for the invariant measure or the angle density distribution are the main motivation of this work in order to derive analytical results. The well-known uncorrelated weak disorder result of the inverse localization length is derived with a clear procedure. In addition, an analytical expression for high disorder is obtained near the band edge. It is found that the inverse localization length goes to 1 in this limit. Following the procedure used in the uncorrelated situation, an analytical expression for the inverse localization length is also obtained for the dichotomic correlated sequence in the small disorder situation.     

Properties of a Non-Aromatic Epoxy Polymer-Based Monolithic Capillary Column for μ-HPLC

We report the chromatographic properties of a new type of epoxy polymer-based monolithic capillary column, the Tetrad-C column. The column was prepared by a completely new method—reaction of a tetra-functional epoxy monomer, 1,3-bis(N,N-diglycidylaminomethyl)cyclohexane (trade name Tetrad-C), with a diamine, 4-[(4-aminocyclohexyl)methyl)cyclohexane (BACM). This polymer monolith has no aromatic functional groups reducing chromatographic performance. The columns were carefully observed by scanning electron microscopy and evaluated chromatographically by use of a μ-HPLC system. It was found that morphological control of the epoxy polymer-based monolith was possible simply by changing the polymerization conditions, i.e., the polymerization temperature and/or the relative amounts of porogenic solvent and BACM. Another advantage was that volumetric shrinkage of the tetra-functional epoxy-based monolith during the polymerization reaction was much less than for the tri-functional epoxy-based monolithic (TEPIC) column reported in our previous paper. A Tetrad-C column 200 mm long afforded up to 10,000 plates for alkylbenzenes in reversed-phase-mode. This column can also work in HILIC mode, although the hydrophobicity of the column was greater than that of the TEPIC column. Heat treatment (160 °C for 2 h; to eliminate residual, unreacted, functional groups) had a negligible effect on column performance, indicating the columns were thermally stable.     

Quantitative analysis of ezetimibe in human plasma by gas chromatography‐mass spectrometry

A new, specific and sensitive GC‐MS method with electron impact ionization technique was developed for quantitative analysis of ezetimibe (EZE) in human plasma. Prior to GC analysis, EZE was derivatized with N‐methyl‐N‐trimethylsilyl‐trifluoroacetamide (MSTFA), which is a trimethyl silylating reagent. The derivatization reaction was optimized and parameters such as catalyst, derivatization time, temperature, solvent and the volume of silylating reagent were investigated. Trimethylsilyl ether derivative of EZE was determined in selected ion monitoring (SIM, mass‐to‐charge ratio (m/z): 326) mode. The method was validated with respect to LOD and LOQ, precision, accuracy, linearity, specificity, stability, and recovery. The LOQ and LOD were found as 15 and 10 ng/mL, respectively. The linearity of the method ranged from 15 to 250 ng/mL. The correlation coefficient of the calibration curve was 0.9977 ± 0.0004 (± S.E.M.). The intra‐ and inter‐day precisions (RSD) were less than 6% and accuracies (bias) for intra‐ and inter‐day accuracy were found between –4.04 and 9.71% at four different concentration levels (15, 40, 100, 250 ng/mL). The proposed method was successfully applied to real human plasma samples for determination of total EZE.